How to ADJUST SAG - Works on All Bikes - Adventure Motorcycle Suspension Part 3

[@MOTOTREK]

Thanks to Iain and Eric for filling-in for Bret who's teaching adventure riding classes in India!

[@byrdt6528]

MOTOTREK back in India again?!?! Lucky!!!!

[@RevelatorAlf]

Great info again. Good fill in lads and amazing at how many people don't make adjustments for different rides and weights too. I talk a lot about this kind of stuff on my off road bike videos too for my channel. Cheers. Your channel always a good watch.

[@hooty6699]

You're not Bret! STRANGER DANGER!!

[@MrHeepspo]

Glad I don't have to go to India!

[@Ky-Cute-Solution-KCS]

in vietnam the dealer only do the onething is count your money and that all

[@Twilight_Charger]

That was a very clearly communicated explanation of what SAG is, how to calculate and adjust it. With all the videos on the topic it is amazing that yours is the only one that is so well communicated. Thank You

[@MOTOTREK]

Very welcome

[@MianCowell]

I think all dealerships should do this for the buyer when selling a new motorcycle

[@MOTOTREK]

Good suggestions, Mian. It's not a "set it and forget it" adjustment though. Your sag should be adjusted every time the load on your bike changes by more than a few KG / pounds.

[@MianCowell]

Better to set it right once than to never set it which is what usually happens.

[@Francois_Dupont]

@@MOTOTREK my bike forks feel softer than when i bought it, is this possible the springs are shot or that the fluid is kaput? neither are leaking thought, that is what i find strange.

[@tolga1cool]

A friend of mine works at a dealership and that's the first thing they do before the customer rides out of the door

[@ShooterMedic1818]

@@tolga1cool that's a good dealer

[@onemilemore541]

Thanks guys! I've read about doing this before and never actually done it. It's sure nice to watch a well done video like this to simplify the process in my mind. Exactly the sort of thing I was hoping to see come from this channel. Now for a video like this one on fine tuning damping adjustments please.

[@david8185]

brilliant explanation of the workings of a suspension, explained it perfectly to a moron like me whos been riding 30 years and still needs to learn. Ya gotta love youtube were all jenius' now

[@Velolion]

Thank you for describing sag and preload correctly. There are so, so many people out there who describe preload as making the suspension firmer or softer, and think that’s what it does, which is absolutely incorrect. You change to a spring with a different rate to accomplish that; setting preload is simply the means of establishing the proper sag....where the suspension sits in its stroke under nominal load. Again, thanks for the proper explanation!

[@frankvanvreumingen6841]

Awesome descriptive video Iain. Thanks

[@kenpage7305]

Great timing, I just purchased a new rear shock for my 1200S and until you posted there were no good videos about this subject. Unfortunately Touratech, it was an Ohlins, but your video was A+. .

[@stevecrocker6904]

Thx so much Iain (and Eric). Going out to adjust my DR650 sag now. Have ridden for 45 years and never done this on a bike yet. Great logical thinking skills translated through precise and clear speaking. I wish all KZbin "how to-ers" communicated like this

[@PatrickGervais]

Great explanation, I’m comfortable trying this now even though I have no experience with adjusting suspension.

[@laszlomolnar8121]

Thanks a lot guys. It always seemed mysterious to play with this. Your explanation is so clear so easy to understand. The last few years I had two visits for service at Ohlins experts and none of them offered anything like this. I will do it for myself now.

[@MOTOTREK]

Good luck, Laszlo!

[@RiflemanSE]

Best explanation I have seen 👍🏻 I would like to see how to set up the front as well.

[@Ptpangel]

Excellent instructional video - I've always set the sag on my dirt bikes, but didn't think of it for my adventure bike even though I spend a lot of time in the dirt!! Cheers, Silent Eric and Iain!

[@stefanklaver87]

Very very usefull, this is exactly what we need. Big thanks to mototrek and touratech!

[@Makermook]

Excellent tutorial. I have a new bike that's too mushy in the rear. Now I know how to set the preload.

[@MOTOTREK]

Mark, "Mushy" might mean your rebound and/or compression damping needs adjustment too.

[@Makermook]

@@MOTOTREK -- Not so much "mushy" as "it bottoms out when I ride over ruts." Yes, maybe I could go on a diet...

[@Fractal_CZ]

Great explanation. And plus - I love Eric's natural acting talent :D

[@brysondunn8414]

This is now my favourite “how to” on KZbin. Well done gents.

[@declary]

Great video......riding down to Washington next July to ride with my brothers...love the scenery!

[@irvingcuevas8877]

Thank for this video, really helped to understand what I did not even know. Now to call my buddy to help me drink some coffee.. and adjust my motorcycle rear sag

[@stevelawrie9115]

Love the way you magically removed the suspension part :)

[@MOTOTREK]

Yes!

[@ronicard]

What a great explanation. Outstanding video! Thank you for putting this online.

[@EnriqueGonzalez-iu3so]

The best suspension info video I ever saw, thank You!!!!!

[@edab8784]

What about rebound settings?

[@erayatalag2207]

Good explanations for rear sag adjustment. Thanks.. But my bike has two wheels. And what about for the front fork sag. Is it %30 again with fully load? If you make video describing front sag and also explain the rebound and compression for rear and front, i think we will get the whole idea and adjust our bikes well for our needs...

[@aggiejet]

ERAY ATALAĞ Isn’t that what Ian talks about at 8:10 mark?

[@TechnMoto]

Good info and overall great video thanks

[@bandit446484]

Thanks for the great video!!! Always nice to see another demo of this process!!

[@HiroshiNaganuma]

Great video.... You can do the same with the front fork suspension? That would be a great explanation for calculate the front SAG. THX.

[@kukku1974]

My same thought

[@Canada1608]

Never seen better explained, thanks so much for this great video. I now know how to do it instead of just guessing it or nor doing it at all for lack of knowledge.

[@Tamaresque]

Best, most simple, and understandable explanation I've seen!

[@michaelskinner896]

Excellent video; super easy to understand and implement.

[@Oscar-eg5bn]

5:50 🤣🤣🤣. Excellent video, i only use to check the manufacture table (Tiger 885i) now i can have another way to adjust.

[@NoelPee]

0:08 look at that! Nice skill to avoid the splash cause by the front wheel!

[@khakimzhanmiras]

adjusting sag is my winter project

[@kmfuentes2012]

Thank you, but I have a question. When I calculate the preload for one persona I should have fuel tank full?

[@Godshole]

That is just incredibly helpful for me right now. New to me bike, arse feels 'stiff' and skippy, I bet when I check this in the morrow I am going to find it was set for himself and herself for when they went out riding and it just never came up in the conversation. I guess that's on me for 'sounding like have some idea of what the f*** I am talking aboot'..... Thank you for the plain and straight forward talk through and demo.

[@eliastzirakis585]

Thanks for the tips. I just adjust the sag on my new cfmoto 800mt that was way off from the beginning. Now it's another bike 😁

[@patriotsleepercell4060]

Very good explanation!

[@anshusharma1523]

That was easily understandable and really helpful!

[@ricardoalves1546]

Great video, simple and clear. Thanks. Keep that good job

[@AlexLopez-rn1ns]

Gracias por las clases muy intructivo bien impotante very nice video. 👍

[@VipinMishraProject]

Excellent info. Thank you. :-)

[@ironhorsegladiator5034]

Best sag video ever, Thank you.

[@elendshuraglump3620]

Very good explained! Thanks

[@yazanakho8907]

Very well explained and helpful, well done 👍

[@marksman303]

Thanks. This was hugely helpful in setting my rear suspension

[@aldo5658]

So glad this came up on my recommendation

[@sosdingle1]

Very well explained. Thanks very much. 👍

[@BikerandBits]

With my adv bike the suspension is fully electric front & back with no manual adjustment, it adjusts automatically with the mode you choose, if only it was as easy to input your leg length & weight then have it done for you

[@MrJohnnynapalm7]

Very good explanation - thanks for sharing 👍

[@MOTOTREK]

You're welcome, Paul

[@backcountry4life]

Do I open or close my front fork compression/rebound and rear shock preload/rebound when switching between riding in sandy terrain and rocky terrain? I figure I should decrease preload to lower the rear when riding in sand, but there really isn't a real guide on the WP website or my owner's manual to help me know what I should be doing with my suspension for the various terrain I ride.

[@sameenakausar1020]

Thanks a lot buddy ! Appreciate your in-depth knowledge about suspension. 👍🙂

[@Cafeducati]

I appreciate this,.. so will my 990!! Also, sometimes I need those crayons and paper to assist me in explanations.

[@muddyboots-mac]

Nice content, for asphalt road which setting should i set hard or soft?

[@EliasJQuinteros]

9:28 El compañero pensando .... debí haberlo pensado mejor, antes de aceptar estar en el video !! ...... QUE FRIIIIOO!!!!! JAJAJAJA!!! Muy buen video!!! Muchas gracias!!! Ahora que no se puede salir, se aprovecha para aprender la teoría y después a la practica YUJUUUU!!!!

[@morningbetterlast]

You should try to adjust the ESA R1200GS.

[@thethimes]

Thanks for the video! One question though. How can a solo rider set to the correct sag? Is it important to measure from the center of the axle and not from the ground?

[@Ronbassettphd]

Excellent explanation

[@paulcoverdale8312]

Why don’t dealers do this as standard before you leave??? Obviously they wouldn’t do this until you were ready to take delivery. Great explanation an thanks for takin us all through it wether we knew or not. Cheers guys 💯💯💯💯💯🪬🪬🪬🪬🪬👍👍👍🇬🇧🇬🇧🇬🇧

[@mattingray5651]

Very good explanation. I never know how to do it. Straight to point too, no useless history, rambling or other B.S. :)

[@SsiolisP]

06:14 you were 8mm off, not 12mm. 74mm minus 66mm is 8mm. (7.4cm - 6.6cm=0.8cm)... but you did do an excellent job not only explaining how to do this adjustment, but also why. Thank you.

[@MOTOTREK]

Good catch!

[@beejoutbush3322]

Awesome fellas. Thanks from Australia 🇦🇺

[@MOTOTREK]

Our pleasure!

[@ColdWarVeteran-r2j]

Excellent video gents

[@highmilagerider1154]

Very informative video. I have a 2019 Yamaha Super Tenere ES. How would I set SAG on my motorcycle with electronic suspension? Do I switch between Soft, Standard and Hard while doing the measurements to adjust the SAG measurement ?

[@AndreaCrosetti]

Great explanation thanks!

[@Dr.Twisty]

Question please--When you adjust preload, does that change the the distance of full extension--the distance when the rear tire is off the ground? If it does, then why didn't you re-measure it after you adjusted the preload before measuring full compression with Eric sitting on the bike? Thanks.

[@jf7393]

It doesn't change it. It will extend the same length regardless of preload.

[@20casbah]

Hi guys very good video . Your coffee machine is amazing please tell me where and which shop did you get it please i have been looking everywhere to find one. Thank you good luck.

[@stevenk8189]

Man, this Eric is a real chatterbox isn´t he.

[@Happy-o4c7h]

I like it, deeper water more calm. 😊

[@byrdt6528]

Super great info! Thanks guys!

[@Labgorilla]

Thanks guys. Is the 30% figure a standard that I should be aiming for? I need to check in my Suzuki v strom if the sag is correct for me.

[@davidroberts7490]

Probably one of the best explanations on sag I have seen.👍 Just one question. If I fit a new rear shock with a progressive spring should I still use the bike manufacturers suspension travel figure. Thanks !

[@rioacharya]

I have a doubt. After adding preload the height of the bike should increase so the initial 580mm measurement with no sag becomes irrelevant. Shouldn't you measure the new "no sag" measurement and then subtract the new race sag to calculate the sag amount? If my understanding is wrong then wouldn't adding preload reduce the suspension travel available as you are pre compressing the spring by a certain amount which then has to be reduced from the standard suspension travel of 220mm without any preload.

[@jf7393]

Adding preload does not increase the total extension of the shock. Spring preload does not affect that measurement

[@The.JZA.]

Awesome video, thanks very much. I have a Duke 390 and the manual says 14mm static sag and 47mm riding sag. I found a point above the rear axle that is exactly 600mm from the axle and I adjusted the shock preload collar to +3 from stock (i.e. 8/10) because I am 100kg plus riding gear. I am now getting riding sag ~47mm which is great. Looking forward to getting out and testing it. Does 8/10 sound about right for my weight or do you think I should go down a notch? I'm just worried about making the head angle too steep and causing front end wobble/instability.

[@RickyJr46]

Very well done, thanks gentlemen!

[@69adrummer]

guy 1: hey, you wanna come with and help me film this video? guy 2: sure, what do you want me to do? guy 1: I dunno....just sit and drink coffee I guess.... guy 2: suh-weet!

[@RevelatorAlf]

ha ha that's exactly what I was thinking

[@sichere]

Puts down coffee @ 3:52

[@cobecerram]

you forget the man in the shadows, the cameraman is always there

[@riaandewinnaar5040]

Well explained there

[@greggclifton5585]

Thank you, very helpful!

[@PepperGeorge]

Thanks, I'm a total newb, and I understood everything as to rear suspension. Front suspension still unclear.

[@exothermal.sprocket]

Love that 1090R. Top of my personal list for ADV bikes. Only tough decision would be 1290 vs. 1090.

[@richardrocco5155]

Lifted_Above , I had the same issue, to purchase the 1290 or the 1090. I am 6’2 211lbs. I wanted the 1290 at first. Then I decided I didn’t need all the electronics that the 1290 offered. Then came the horse power, would I be happy with the 125 hp instead of the 165hp in street mode? When I realized that my 103 Harley Davidson fat boy only has 76 HP. I knew I could count on the 1090 to do the things that I want to do with the bike. I bought the 1090 last week. And I am not disappointed at all. Now I will install the 12volt charger on it and I will probably install a center stand. Good luck with your decision.

[@exothermal.sprocket]

@@richardrocco5155 And to add to the difficulty, I've ridden both on recent demo ride (pavement only). I've had the DL1000XT recently and apart from the excellent machine it is, I wanted more power. I've ridden the 1190 model too, and the power on that machine was excellent. Not so much low/mid power on the 1090 as the 1190 had. 1290 Super Adv T was the bigger model I tested.

[@dedsxy38]

@@richardrocco5155 Did the same thing. Demo'd a 1290S, then purchased a 1090R a couple months ago. After watching countless adventure video's, I believe I will invest in folding levers and a center stand as well. Now if the snow would just go away, I could get some riding in.

[@exothermal.sprocket]

Always a treat seeing the likes of Chris Birch letting 'er rip somewhere.

[@louislouis9661]

1190 is best for your needs I'm thinking

[@pinnacleroofing9841]

what are those mirror bracket? those things are sweet!

[@MOTOTREK]

Checkout the Touratech website, Michael.

[@HORNET6]

Why has it all of a sudden become race sag? Good explanation.

[@paulbridge6063]

Well, I guess i just found your video, i asked about on the set iup video :-) great stuff

[@MOTOTREK]

Glad you found it, Paul.

[@itscraigg72]

Great video

[@jackmilan74]

Nice video. Could you give similar advise for front end suspension sag setting on your BMW? Should I go for 30% travel as target? Thanks and happy new year!

[@alanrobertson9336]

Great video .... cheers lads

[@JohnBraman413]

do you have to do this every time you ride solo, or with gear and/or a passenger? is there some middle ground setting that can be used for all riding settings? that way you don't have to keep changing it. every time.

[@MOTOTREK]

You should adjust your sag whenever the bike's load changes substantially, John.

[@volvogt21]

Great info thankyou! How do you measure the total suspension travel on an old bike where there is no data or the suspension has been changed?

[@MOTOTREK]

What bike?

[@volvogt21]

@@MOTOTREK a 95 r1100gs thanks

[@orangelion03]

Depending on the bike...you can use a ratcheting strap between frame members and swing arm to fully compress the system.

[@orangelion03]

@@volvogt21 blog.touratech-usa.com/2013/08/06/how-to-setting-suspension-sag/ scroll down to the end of the article, they have a list of major bikes and models.

[@volvogt21]

@@orangelion03 Legendary. I must admit I was always a bit of ride it as it comes kind of guy. Now I have three bikes I regularly ride I am noticing the differences between them more and find I cannot adapt to poor handling anymore so this should be a great start to sorting that out.

[@daaknait]

This was really helpful, thanks!

[@MOTOTREK]

You're welcome!

[@carkdonwah1528]

Great tutorial. Time to setup my XCA.

[@MOTOTREK]

Good luck, Cark!

[@Safetyguard]

One question on this: in witch general setting of the bike's rear shock (comfort, sport, fully loaded) Do i need to do this measurements?!

[@patrickcooper9641]

Hello there, I just bought a complete set for my 1200 GSA 2014 and I love the way it responds. But I cannot find anything about the front shock setting! Do you have any suggestion/advice for it! Great review. Thank you.

[@tHaH4x0r]

I dont see how leg length would impact suspension settings. If your bike is too tall/too short for you, you should change out the saddle, not mess with suspension sag. But you are right. A lot of bikes have an arbritrary 'rider', 'rider + luggage', 'rider + pillion', 'rider + pillion + luggage' kind of system, but it would be nice if you can adjust the suspected weights of these in the system, such that it knows how to properly adjust sag with the default spring. But you would also need to be able to adjust the spring rate in the system if you change it out for something else.

[@davereinhart9933]

Best explanation that I've seen!

[@marktwain..1972]

That forest makes your voice sound like a garage :p Good info! Thx!

[@robkcra]

I am really struggling with this: my situation involves a gen 2 KLR with stock rear shock (5 clicks of adjustability) but a Top Gun heavy duty spring. So 30% of the bike’s 7.3” of travel means I should be looking for 2.2” of sag ..... I believe. Yet starting at setting #1, the softest setting, I get 3.75” of sag. If I dial in more stiffness on the shock, the sag increases, not decreases. Do you suspect that my shock is too heavy? Thank you for your very helpful tutorial.

[@MOTOTREK]

You need a softer spring, Rob kzbin.info/www/bejne/h6PHq3WOrcZqm5I

[@anthonymoreno3219]

Would luggage/ panniers and camping gear make any difference in your target number. ?

[@Italianborn]

What if on my brand new bike instead of changing the spring i just make a spacer that goes on top of that compressor ?

[@madiantogloria7581]

would like to ask you a question about my crf 1000l2 - lowering the ''thing'' an inch -inch and half from rear and front suspension , reason ease in city traffic stop and go , it is atrocious climbing on every time,- love to ride it as is but really have to deal with commute and about town more than pleasure ride.

[@HellenicBM]

This is the best explanation l have found so far on YT. There's so much misinformation. "Sag should be between 30-40mm" is not correct for all types of bikes and suspensions. Just wondering if the procedure works the same for forks as well?

[@hardworkingamerican8847]

Thanks for that . Being a beginner rider there is a bunch of things I need to learn . Won't get it all overnight or even in a year or 2 . Being a motorcycle owner is a little different than renting quads in Baja or riding a vintage dirtbike once every few years .

[@mgeickhoff]

Congratulation! And about electronic adjust, like Bmw R1200 GS 2013-2016!? How can I adjust? Thanks

[@MontysMotos]

Same concept but you're limited to picking the preset that gets you in the ballpark. The module that controls your suspension relies on a stroke sensor that needs to be calibrated in a specific manner (without a rider). They can, however, work with different spring rates if you wanted to dial it in that way.

[@feer4955]

why didn’t you take the fully extended length for the second one after the adjustment? does the preload adjuster not affect the fully extended length?

[@MOTOTREK]

That's correct.