Mount a MTB Tubeless Tire with a Handpump: Tips & Tricks

Whether you're on a trip, or helping someone out at the trailhead (or helping yourself occasionally...) some quick tips will help you successfully to Mount MTB Tubeless Tires with a Handpump. Check out this quick video from BikeCo.com or glance through the short write up below.
If you watched the video you'll see the first tip to mounting a tire easily, whether with a handpump or a compressor is to ensure the most volume of air is pushed easily into the tire.
For this I love valve stems that have a removable core.
By removing the core I have greatly increased the volume of air I can get into the tire quickly so that the tire will bead onto the rim.
The next step is to get a grip that allows you to easily hold the pump head onto the valve while having your hand wrapped around the tire.
With your hand positioned so two fingers can hold the pump head and you can wrap your thumb onto the top of the tire you'll have a good grip for the next step.
While pumping bounce the tire and squeeze with your hand.
The bouncing and squeeze will help reduce the volume inside the tire which also increases the PSI to help bead the tire.
This method tends to work pretty quickly, so if you're struggling take a look and make sure there's nothing obviously wrong.
Some things that are SUPER annoying if you've tried this for a while include having both beads of the tire on the same side of the air valve (so your pumping goes straight into the atmosphere) or having the bead sitting on the valve.
Depending on the tire it may help to rotate the tire as you bounce it to give a bit more pressure in different spots of the tire.
Hopefully this quick video and writeup help you better understand how to Mount MTB Tubeless Tires with a Handpump!
We appreciate you shopping BikeCo.com and invite you to jump over to check out #thebestinMTB (and eMTB) including our unbeatable selection of tires.
bikeco.com/mtb...