Moza Air 2 BALANCING + SET UP

  Рет қаралды 38,512

LoveTheBasics

LoveTheBasics

Күн бұрын

Пікірлер
@ZackisWhackkk
@ZackisWhackkk 4 жыл бұрын
I've watched a ton of videos on this and still couldn't figure out how to balance. Now, thanks to you, i have! Thank you!
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
I’m so glad I could help!
@BeSceneImages
@BeSceneImages 3 жыл бұрын
The best and most helpful video on the Air2. I have watched at least 7 different videos on the gimbal and yours is the BEST! Well explained, excellent demos and you told us info in clear language. Thank you. And yes I have subscribed, I want to help you get that tattoo.
@alissagee4552
@alissagee4552 2 жыл бұрын
This was so helpful. This gimbal was driving me bananas.
@thetutorialpgno1
@thetutorialpgno1 3 жыл бұрын
Such a useful video this is. I went through lot of video.. But didn't help me.. But your video is just what I was looking for. Thank you for creating this video.
@karinalopez2639
@karinalopez2639 4 жыл бұрын
Sooo helpful, I've had this gimbal for a few weeks now and I just learned a few things I did not know, especially the follow function!
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Well I’m so glad I can help!
@Thisbook2022
@Thisbook2022 3 жыл бұрын
Bro thank you so much. Very straight forward video. Thank you!
@LoveTheBasics
@LoveTheBasics 3 жыл бұрын
Of course!!
@chopvisuals
@chopvisuals 3 жыл бұрын
Thank you sooo much I’ve been struggling with the last arm for almost all day and this video really helped me so much and I also learned how to set up a gimble thanks to you.
@myearhurts
@myearhurts 4 жыл бұрын
Best video for this gimbal by far
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Thank you!
@syedarmaghanhassan4652
@syedarmaghanhassan4652 3 жыл бұрын
Hey! thanks for sharing. You went a bit way too fast for me there.. I just can't figure out HOW TO BALANCE THE ROLL THING? IT always comes in the way. Like what you're doing at 3:47. The Gimbal's base rod, the Last Pan axis is coming in the way, and roll axis can't just go about it. IS IT NORMAL? Don't we want our gimbal to be able to just go round n round and round? A quick reply will be highly appreciated. I need to see if I need to return the gimbal ? :( :( :(
@ericsasadeusz7954
@ericsasadeusz7954 4 жыл бұрын
Great tips and presentation! I have this gimbal with the Nikon Z6 and your guide has helped me improve balancing the camera which I've previously struggled with. Thanks for the help!
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
I’m so glad to hear that!
@hollywoodknights9343
@hollywoodknights9343 2 жыл бұрын
At 1:30 ish you talk about having two mounting screws. I seem to have lost these/this. Can you advise what kind of screw it is please?
@baardtprodukties
@baardtprodukties Жыл бұрын
Good tutorial. Balancing the last arm on lock, I did not know that. But I have an iFocus M and it constantly fails to work, even after firmware update. Really annoying. Ever experienced that?
@iamtherjp
@iamtherjp 4 жыл бұрын
Excellent!! Just what I was looking for
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Perfect!!
@timelessinladakh6820
@timelessinladakh6820 4 жыл бұрын
love the battery hack! thanks for the tips! :)
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Thank you!!
@ardielopez7426
@ardielopez7426 4 жыл бұрын
Thanks man, this video was a lot of help. Cheers!
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Thank you!!
@deejaylolahug6376
@deejaylolahug6376 4 жыл бұрын
Hello thanks bro but need help after updating the new firmware my gimbal is in sleep mode
@jhonathanazevedo5891
@jhonathanazevedo5891 3 жыл бұрын
Hello everyone, how are you guys? I'm about to get a Aircross 2 and I was wondering if I could balance a GoPro hero 9 on it? Have you guys did it before? Thank you in advance!
@jimlafferty
@jimlafferty 4 жыл бұрын
What cage is that? (SmallRig?) Thanks for this vid - very helpful!
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Yessir smallrig for everything
@jimlafferty
@jimlafferty 4 жыл бұрын
I got the newer Z6 cage and can’t for the life of me get the two connection points on the Kessler plate like you show. Grrr.
@SeriousFX
@SeriousFX 4 жыл бұрын
Hey i have a problem with rolling the camera right.. Im pretty sure its balanced but evrrytime i roll right it does some unpredictable movement
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
I had that same problem and I don’t really know the solution. I would fully recalibrate it
@SeriousFX
@SeriousFX 4 жыл бұрын
@@LoveTheBasics i tried same shit thanks for the reply though
@jasonstelzel
@jasonstelzel 3 жыл бұрын
Great instructional review!
@bobsigny
@bobsigny 4 жыл бұрын
I think I balanced the camera, but every time I start using the buttons after calibrating it goes into sleep mode. The only way to get out of sleep mode seems to be turning it off and back on again. I can seem to figure this out.
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
I think you either have a motor locked on accident or it isn’t balanced
@Osmien118
@Osmien118 4 жыл бұрын
...good stuff, thanks man!
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Thank you!!
@Kadehr
@Kadehr 4 жыл бұрын
Can this gimbal control the focus (with the focus wheel) on the S1/s1h with a focus by wire type lens?
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Yea I definitely can
@shotbyna
@shotbyna 4 жыл бұрын
8min Mark is golden
@GezusV
@GezusV 4 жыл бұрын
Thanks 🙏🏽
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Of course! I’m glad I can help!
@sevenelevenvisualworks2777
@sevenelevenvisualworks2777 3 жыл бұрын
I need help. After actualizing my Moza AIr2 the Gimbal has become crazy...i wrote to the support center a few days ago with some pictures and videos of the proccess and the results of the updating and nobody answer...in my oppinion very bad service. Gudsen Moza Support ! Do you Support? Are you working? I hope your answer don't get more delay after 4 days writing you in all your support channels....
@soulhustler1200
@soulhustler1200 3 жыл бұрын
THANKS!!!
@shajitk427
@shajitk427 4 жыл бұрын
connected cable to gimbal but not showing camera model in display to select ?
@teutschtyphd9719
@teutschtyphd9719 2 жыл бұрын
Thank you sooo much
@harry-xu8pk
@harry-xu8pk 4 жыл бұрын
Hi I am getting balance check error on my moza air 2 please help me to fix this issue. Thanks
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
You should be able to tilt the camera any which way and it should move. If it does, you need to rebalance
@harry-xu8pk
@harry-xu8pk 4 жыл бұрын
@@LoveTheBasics hi thanks for the quick response, so you mean I am getting balance check error just because my camera is not balanced properly?
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
That’s all that I can think of
@gsimbron
@gsimbron 3 жыл бұрын
thnaks man!!!
@tommoh5468
@tommoh5468 2 жыл бұрын
thanks !!!
@goggly21
@goggly21 4 жыл бұрын
thanks
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
Of course!
@vinod8june
@vinod8june 2 жыл бұрын
how to move camera left right.....
@Panotaker
@Panotaker 2 жыл бұрын
One thing about the batteries. If you are not going to use this gimbal for a while, take out the batteries. If you don’t, the batteries will slowly drain to zero volts, and if they stay at zero volts for a while, they will not take a charge, and you will have to buy new batteries.
@maneelmajhar1407
@maneelmajhar1407 4 жыл бұрын
Does anybody know why the gimbal keeps going to sleep mode after like every 5 minutes
@GoTread
@GoTread 4 жыл бұрын
not balanced somewhere...
@fanistopsvlog9360
@fanistopsvlog9360 4 жыл бұрын
or the wires inside....more complicate...
@jimlafferty
@jimlafferty 4 жыл бұрын
Yes! You've left the axis lock on.
@manishachohan4599
@manishachohan4599 4 жыл бұрын
This is not helpful, my gimble does not balance with a sony A73 and a 10-18mm lens. I followed it twice. Try another one
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
This gimbal is powerful. It’s can easily hold that rig. Try again
@marcellebner9124
@marcellebner9124 3 жыл бұрын
Why is it putting me always in the sleep mode?
@bulldozeproductions7330
@bulldozeproductions7330 2 жыл бұрын
Make sure the camera is properly balanced and also make sure that you don’t have it locked. I hope this helps. If you still have issues let me know.
@robertleger4986
@robertleger4986 4 жыл бұрын
I got one of these about a year and half ago....it was $600 at the time. Hardly EVER used. Think on one job. So i had a job a few days ago...charge up the batteries full and balance the camera to get ready....After a little while the whole thing starts vibrating...with my camera on it...have a small camera Sony A6400. Called B&H for a US customer service number...their "gudsons".number doesn't work. I emailed Gudson - after a few days they get back to me....OK..."send serial, bill of sale and "video". A video. So i try to do a video and this time looks like the unit isn't vibrating so i say wow...maybe somehow the problem went away - few seconds later the gimbal arms go dead....just like that. Powers up and falls down. Thank God i was smart enough not to mount my camera on the second time. Guys, when these things fail you can whack your valuable lens/gear good on these devices...So now they send me a "firmware update" link....doesn't work ....the device doesn't want to go into "boot mode". Firmware updates generally have to do with how a device interfaces with an operating system or another device...has nothing to do with general failures....$550 right into the friggin toilet....I"m going to correct this post if i'm wrong but it looks like these guys are selling these types of devices all over the states but dont' even have a customer service number or repair vendor locally...Fucking unreal....These are sophisticated devices - with firmware/software motors....very hard to solve and describe a problem over emails....They sell gimbals...new technology....but they conduct their customer support over email/no phone/ no chat....and you wait for days before they respond...God forbid you need for a job....
@LoveTheBasics
@LoveTheBasics 4 жыл бұрын
If it was shaking then turning off then you didn’t balance the camera correctly. If you have your camera on it and it just shakes, that means you have to tune the motors. If the motors are supplying too much power to each axis then it’ll start to shake
@robertleger4986
@robertleger4986 4 жыл бұрын
​@@LoveTheBasics No --i' had it perfectly balanced actually. i can try to tune, I definitely did the autotune. These guys really should have a customer support line though. So that i don't have to look around all over the place for answers. They either got to put up or shut up. Either put product up in our country and offer reasonable support and service, or get the hell out and sell over there. I'm going to contact a buyer at B &H and ask him why this vendor isn't supplying a customer service number for their customers. In my case it was shaking at first, now it just powers off and shuts off power to the gimbal; imagine if you have a $2000 lens attached when it does that. Bang, metal to metal. This is money we're talking about here. I dont' have toy cameras. Don't want anyone's product to bang my good stuff around. I don't even want to attach my gear to it now, dont' trust it. Really don't. I 'm going to try to fix this one get rid of it and go with the DJI RoninSC. DJI seems to have MUCH better customer support, at least the website is set up properly. How to contact: phone /email / chat. Looks like the site is done right. www.dji.com/support Gudson a different story, took them a few days to get back to my email. And to think that i paid $600 for this thing a year and a half ago with no damn case, and hardly has been used. And now they're selling for $430 with case. Bought for $600 new in mid 2019. I'll probably at best have to sell for $250- $300 minus what i have to pay for F*& repairs. Garbage product everything considered. This wasn't an inexpensive product. Almost have to consider throwing away, considering the time wasted in contacting, trying the firmware etc.
@JayJayHaven777
@JayJayHaven777 3 жыл бұрын
holy f*ck ive been trying 2 rebalance this thing all week and it was actually just that i had the wrong motor setting! had to go gimbal set, motor, power, level and then change it until the vibrating stops
@garvbomjan6675
@garvbomjan6675 3 жыл бұрын
Moza Battery Sucks! Don’t Buy !
BEST Gimbal Settings and Quick Balance Tutorial | MOZA Air 2
16:29
PIMP MY GIMBAL - Making the Moza AIR2 even BETTER!
5:23
David O'Dwyer
Рет қаралды 20 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
DOES THIS GIMBAL BEAT THE RONIN S? | MOZA AIR 2 | review
16:36
atola visuals
Рет қаралды 74 М.
How To Scan Medium Format Film With Full Borders
7:45
1331photo
Рет қаралды 573
The Complete Guide to the MOZA Air 2 from Setup to Timelapse
22:28
MOZA Air 2 tutorial with Canon
5:29
Gudsen MOZA
Рет қаралды 40 М.
How To Get Good Gimbal Shots
10:02
Peter Lindgren
Рет қаралды 1 МЛН
The Best Accessories For The Moza Air 2
5:29
Shawn B.
Рет қаралды 15 М.
Balance a HEAVY Lens on RONIN SC | Tamron 28-75
10:57
LoveTheBasics
Рет қаралды 30 М.
Moza Air 2 Review With Moza Air 2 Sample Footage
10:50
Photography And Video Tutorials
Рет қаралды 27 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН