MPLS L2VPN || Detailed Explanation & Step by Step Configuration || Wireshark || CCNA & CCNP

[@kk61105]

Very well explained 👍👍

[@piotrwikarski9401]

Great video, thank you. You got me confused at the end when I though you wanted to catch icmp from SiteA to SiteB over the mpls and your wireshark showed only rip multicast..? So my question is: would that be possible to see communication other then rip multicast (for example: telnet, icmp, ftp, tftp) between SiteA and SiteB ? When using whireshark to see the traffic would I be able to read it in clear text if protocols like telnet are used?

[@JKRowl]

Thank you sir, this was brilliant!!

[@stephen8253]

Great video, time to try it for myself 😁

[@hariprasadkannan5060]

Great video Sir.. could you please put a video on EVPN , VPLS.

[@arjunprs]

If we don't need loopbacks in site, will l2vpn work even without a routing protocol on site?

[@AgentMurphyx]

Very well explained!

[@RishiRap]

Towards the end with wireshark capture, ICMP was right there in plain sight to demonstrate the details but somehow you zeroed in on RIP pkts which of course won't show any ping traffic. Not sure, why?

[@abhishekmurali5]

Could you please help me here, I got the below error when I issue the Xconnect command on the PE- Router. " MPLS encap is not supported on this circuit "

[@anjilkhadka3633]

same issue

[@pravinyogi5981]

Thanks sir

[@gauravenjoy]

Well explained, but what is the reason of 1. High latency between site A and Site B. 2. Is this method (L2VPN-Xconnect) used for P2P only or can be used for Multipoint as well.

[@AbhishekSingh-ky9jc]

which router image is used for this lab ?

[@networkengineer2734]

Make video on VPLS and VPWS Difference between them Please

[@GPMTechTrain]

Yes sure

[@DileepKumarMB]

Good one, thanks. If you have created the video for "MPLS L3VPN", please provide the link here. :)

[@RishiRap]

Label 200 is shown in packet capture towards the end but not shown in LFIB of SiteA-PE1 router. What's the reason for that, pls?

[@refaiabdeen5943]

Cheers Mate.

[@beyondthehorizon7778]

please explain the commands in brief sir

[@santhoshkumar-vp2mi]

Hi bro can u do same kind of video for L3 VPN also…. If u have already done please post the link

[@mikkio5371]

Thanks

[@SONSONADAVITH]

May I have basic example of MPLS L3 VPN?

[@GPMTechTrain]

Mostly it will be used in WAN service provider network. As you are looking for an example, consider you have two different branch offices operating in different geographical locations, this links will be used to connect both of them.

[@SONSONADAVITH]

@@GPMTechTrain Yes, I'm looking for an example with two different of branch A&B.

[@sandeepabbadivts8387]

how to make vpn between backbone pfsense firewall and remove client using mpls vpn

[@ravi12ver]

thanks a lot!

[@rferriolo]

Good job. Everything worked beautifully. Looking at the MPLS Layer 2 & Layer 3 headers in Wireshark, there doesn't seem to be a way to determine which one is layer 3 and which one is layer 2 unless you go back to the command line...

[@anjilkhadka3633]

MPLS encap is not supported on this circuit I got this error

[@JoelGO20]

Could you share the file please?

[@VenkateshSudha]

How Internet is provided in L2 VPN

[@tvuser-x2p]

the cisco IOS image you are using is c7200-adventerprisek9-mz.150-1.M !!!!!! don't hide this information from us, please. boss!!!!!!!!!