Mr Gasket Push-On Hose

Mr Gasket may be known as the go-to source for gaskets, but we have way more to offer! In fact, Mr Gasket continues to expand its full line with new products just like our latest offering of push-on-hose.
If you’ve ever had to install twist-on fittings on AN hose, you’ll probably agree that the most frustrating and time consuming part of the job is just getting the twist on fittings onto the hose. Mr Gasket has made it easy with our full line of push-on-hose. That’s right a push-on-hose, no more twisting, spinning or stripping threads!
Subscribe now to make sure you don't miss any of our new products!
www.youtube.co...
HOLLEY ON SOCIAL:
Facebook - / holleyperformance
Twitter - / holley_news
Instagram - / holleyperformance
Website - www.holley.com
Product Videos - • Product Videos

[@curtiscamaro5926]

I Hate Mr Gasket Parts , I dont know about the New Hose . But Im having to replace their Crank pulley on My Expensive Nelson Big Block and their header bolts too .. In the 70s I had No problem with their parts . Dont know what happened , but I Run from their products Now . Sorry Guys . Cant try this one .

[@curtiscamaro5926]

The Crank Pulley Wobbles , Can you believe That ?

[@HolleyPerformance]

Did you install a chromed stamped steel or aluminum pulley? J

[@curtiscamaro5926]

@@HolleyPerformance Its Chrome Stamped Steel,

[@HolleyPerformance]

@@curtiscamaro5926 Sorry you're having issues, but If you're running an expensive big block I think it deserves better than a low-buck stamped steel pulley. If I were you I'd go with a quality aluminum unit and give that Nelson big block what it deserves!! Thx J

[@curtiscamaro5926]

@@HolleyPerformance I did. I had bought it before my engine was finished . I only needed it for the altenator . It had two grooves . I only needed one and Neither groove fit and it wobbled . Thats why I got a aluminum piece from Summit . and have shunned Mr Gasket Parts . Now i Love Holley Parts besides there is No Better Carb than a Holley . Holley Consider making your Own Tunnel Ram. I will be the First to buy Its a big Hole in that Market . and add your New EFI units . I need that Now! I have seen a Holley tunnel Ram before, didnt you us to make them?

[@mikelangieri6602]

Can these push fittings and hose be used for Power Steering return lines? Low pressure lines, just wanted to mention that because whenever you type in Power Steering, it seems to assume that everything is high pressure.

[@loganshotrod4x464]

I did that, no problems so far… the return lines go straight to the reservoir & that’s not pressurized…

[@Ferdan1979]

I order some of this hoses nice strong but wrong application I received a sae 100R6 and check what type of hose is this according to the books this is a hydraulic hose i will not recommend for use with gas/fuel ect besides that all specs is what the guy claims good

[@Dinger182]

So, uh what’s the difference between all the Holley brands offering the same things?

[@SRZRB]

Can you use these with water lines for a turbo charger?

[@Foxbody_Guy]

Why does it get a 1 star rating for pump gas? Can you use for fuel line or not?

[@yallasoccer6280]

E85 safe???

[@JosephNnbs]

I don’t think rubber is commonly used so I can only assume no from what I heard others say.

[@seangowan7441]

Is the hose 3/8 inner diameter?

[@JosephNnbs]

3/8 inner would be 6an size. 5/8 is 8an