MR JE C Servo with FX5U Part 1 (CC link IE Field Basic)

[@davidekadukowski4656]

What are the first 2 lines for?

[@erickreyes397]

Hello, could you provide me with the manuals that appear in this video?

[@sheikameer8235]

How Y177 and x177 is selected?

[@balajidevaraj2740]

I did not see MR-JE-C series in my Gx works3, I am usingV1.063R, please advise how to get required servo amplifier in network group

[@Technocrats91]

First update your gx works 3, after update if it doesn't show mr-je-c then you need to add profile manually in thst case download profile for mr-je-c from Mitsubishi site and add it to gx works 3

[@nekilood422]

@@Technocrats91 Sorry for my stupid question but how can I update GX works or how can i add and where to download profile for the amplifier. I recently started working with Mitshubishi PLC so I'm pretty new to it so again, sorry for stupid questions. :)

[@Technocrats91]

@@nekilood422 follow the steps to download updates kzbin.info/www/bejne/pHyumJaeotJ4jKc

[@ghalib4610]

@@Technocrats91 how to add profile manually

[@ghalib4610]

Dear sir thanks for always your support What will be the controlword(6040) value for servo stop & speed change during servo running in pp mode

[@Technocrats91]

check 605Dh for stop during PP Mode

[@ghalib4610]

@@Technocrats91 The shaft also unlocks when I stop servo

[@andrewnauth4899]

Can you use Mr-J4-GF with FX5U the same way?

[@sompongsuttiprapa1191]

GX-Works3 Ver. ??

[@ashitoshdhamankar2001]

in case of brake motor, how to make servo brake ON?

[@Technocrats91]

In case of Mitsubishi Servo Drive and Motor with brake, we have a dedicated output for brake known as "MBR" , you need to wire the brake through that output, drive itself will take care of brake.

[@ashitoshdhamankar2001]

please send manual which is shown in video (for RWw & RWr mapping)

[@Technocrats91]

@@ashitoshdhamankar2001 type MR-JE-_C SERVO AMPLIFIER INSTRUCTION MANUAL (Network) on google

[@ashitoshdhamankar2001]

For Fx5U, in which word we get servo running pulses (Y0, Y1), Like D8340 in Fx 3U.

[@hapham-qd4jl]

how to turn SON ON.( Servo ON). Don't use CN3

[@tayyenfood1010]

Does jack cn3 use

[@Technocrats91]

Can be used if required, like LSP, LSN, EMG Etc

[@albershaikh2032]

Sound???

[@omprakashbudhwant5794]

This is part 1 only , part2 ?

[@Technocrats91]

next part2 will be available by next week

[@Technocrats91]

kzbin.info/www/bejne/gJ6tpIGBralliNE

[@muhammadfassil4726]

Part 2 ??

[@Technocrats91]

Due to unavailability of MR-JE-C servo physically at present i am unable to make part 2, i will upload it soon.

[@Technocrats91]

kzbin.info/www/bejne/gJ6tpIGBralliNE

[@muhammadfassil4726]

Under Settings Statement label...you have dmov k1000 to target velocity then how could other speed setting value move to target velocity

[@patelromilnareshbhai]

Can i have a mail id for communicat with you regarding mr-je-c ?

[@Technocrats91]

[e-mail]