█ How to make Pioneer IP-BUS to 3.5 mm Aux Input Cable █

How to make Pioneer IP-BUS to 3.5 mm Aux Input Cable adaptor for Pioneer DEH-P7700MP DEH-P6700MP DEH-P5800MP 8600R
▼How to setup/program the Aux input for a Pioneer ▼
• Video

[@pedrotski]

You went the hard way about it bro. Best thing to use is the system panel plugs for your normal ATX computer case. ie: hdd led, power led, reset/power button etc. Just cut them off and slide them on. No need to cut, tape and modify the plug etc.

[@user-gr8gn9cu8u]

Thank you for providing this information, really helped me a lot.

[@vcanidis8044]

It works.Thanks.Volume is OK.

[@electronicshelpcare]

Super video

[@diegoa3444]

Thanks! It worked and perfect!

[@yar9716]

Can you use the standard white / red cables that you have attached to the unit? And connect them to a mini-jack cable?

[@matt697845]

You can buy this cable on ebay for 2.99 delivered.

[@diegoa3444]

4usd and In Argentina you have to pay double for shipping.

[@nicolasheredia8729]

Hola saludos desde argentina,quería saber cómo conectas el auxiliar 3.5 a los demás cables, muchas gracias

[@RideForFreedom.35]

Hard way but good job

[@wifei]

IP-Bus and Aux Pinout NOT in the link

[@nikopro16]

Hey man i bought ip bus - aux cable on amazon by pioneer and than i connected it nothing happened. is there some way of activation or something? avc hrz08 model

[@johnl5573]

ip bus is for cd changers. you have to put it on cd and play a silent track while playing music through the aux

[@myid9876543]

No, CD Changer won't appear unless there's a digital device live on the bus. AUX is analog. You have to go into 'initial setting' mode and enable AUX on the radio. There are instructions to do this in the manual. Check both the owners manual and the initial setup manual.

[@michaelmayse417]

Turn off your HU.. Press and hold the power/source knob until the menu comes on. Scroll through until you see AUX 1 turn it on Scroll one more to AUX 2 and turn it on. Power on the HU and figure out which one is aux 1 and aux 2 one will be playing music from your phone. Repeat steps and turn off whichever aux your not using. All pioneers ive ever used aux1 is the ipod input on the front and aux2 is the IP bus

[@bhumeshmasram8834]

Jald se jald bataiye

[@kevinjohnson3088]

What did use for the aux cable Headphones or a actually aux cord What did you use as the plug for the cd player

[@isurusemasinghe7520]

its worked thanks for the video... btw volume is too low

[@creativestudio6844]

E Bn eka wada karanawada

[@DMatthew98]

Thanks a lot! I have a small issue, that i have low volume :/

[@axurabulaqbasi3813]

Thank you.superrrrr

[@shyamkumarappu2803]

Plaese help me to connect aux in my toyota car sterio (panasonic)

[@MultiVentos]

Is the level not too tall? Because it is the normal aux deforms.

[@user-vj8ul1bh4w]

Saludos y si fundiona el auxiliar

[@Gesko014]

Thanks

[@jonycanales8678]

berry good thank s man

[@MultiVentos]

Do 6800 IB work? No sound is calculated.

[@abhilashma04]

what is that small black socket jest near the bus port, when I connect my android phone to aux input, sound is very low I can only hear small sound after reaching maximum volume .. what maybe the cause of my system plz help

[@JunterCamacho]

Muy Bueno me funcionó excelente

[@valentinogalesio8865]

Cómo conectaste los cables del auxiliar

[@ahmedford8135]

thank s

[@michaelmayse417]

Only a fucking tweaker would go through all this shit instead of buying the cable on ebay for less than $5 shipped. Lmfao

[@gabeulrickson5989]

could've done without music

[@sonakaykalo1]

IP-Bus and Aux Pinout in this link. don't work

[@andresamuel9561]

i wonder whats the jack next to the ip bus jack is for

[@michaelmayse417]

Andre Samuel it is for the wired remote which is a Mic for using the auto eq and auto time alignment depending on what model u have.

[@andresamuel9561]

Michael Mayse can it be used as a AUX input

[@kwesibirdie9723]

other dan going all true this you can use an old pc tower it got cables use the usb 1 that gose to the pc board much easy than doing all this :P

[@bhumeshmasram8834]

Free dix resivor se oux input kaise nikalen

[@qafurqafarov193]

Nicee very much

[@aux1z11]

I was going to, but I found a real one on ebay for 7 bucks free shipping.

[@dinomirarchi1477]

can anybody tell me why the lights on my Super Tuner won't work but you can put a CD in it and the CD plays

[@jaredvaz2450]

display issue ull have to get the display replaced

[@gabeulrickson5989]

didn't work at all... only used the right side because I only have one speaker (home computer tower project and a surround sound speaker) and I didn't get any sound at all

[@badmaster7022]

Song Name Please

[@johnalenwork53]

PLEASE SHOW PINOUT PLEASE

[@katbradley5994]

got no audio, touched the 3.5mm plug tip and my stereo freaked out and shut off

[@andreiaduarte1166]

KAT Bradley cugy.6 b 7i boa taoj 0uk. gfh 2 rede de.

[@shoyebmhettar1567]

I have jvc car tape plz tell aux input for this send wtsup no

[@user-jt3bs8zl3f]

Музыку в студию

[@AnthonyCamposL]

No se ingles, no entendí ni verga..

[@wifei]

Al final el escribe "Es muy importante programar la entrada auxiliar ya que no funcionará, con el siguiente video aprenda a programar una entrada auxiliar"

[@marklee1462]

terrible video, most of it of the back of your hand, lots of time spent on showing no new information, and overexposed lighting.

[@ovchelupoffteam9460]

Идея хорошая,но реализация-колхоз!

[@josefernandomansi7960]

só gostaria de acertar a hora

[@TopBassBoosters]

That's simple if u have the board like mine but it'll work try holding the disp button or press it there are ways to do this it has to turn off the display after that press and hold the volume button it will open some settings that does not open normally find clock set and just set the time

[@alirezamomeni5151]

ALIREZA, [۱۴.۰۷.۱۶ ۱۸:۴۸] I'm making my Pkhshm ALIREZA, [۱۴.۰۷.۱۶ ۱۸:۵۰] The socket is not available in Iran

[@alirezamomeni5151]

tank you ALIREZA, [۱۴.۰۷.۱۶ ۱۸:۴۸] I'm making my Pkhshm

[@user-xf6hw4iu1s]

Yuck you not tern on

[@cristiansanchez3296]

no entendi nada de tu huevada de video

[@wifei]

Al final el escribe "Es muy importante programar la entrada auxiliar ya que no funcionará, con el siguiente video aprenda a programar una entrada auxiliar"

[@JunterCamacho]

Muy Bueno me funcionó excelente

[@valentinogalesio8865]

Cómo conectaste los cables de auxiliar