World's First REVV1 DRT 72V E-bike! *HOW TO*

[@MrCentralDriver]

PARTS LIST: RIDE1UP Revv1 DRT E-bike - bit.ly/3W4znvl Motor Kit w/ Display & Controller - amzn.to/4eNHHsy Revv1 Storage Cage - ride1up.com/product/revv-1-center-storage-cage/ Motorcycle Tire - www.motosport.com/shinko-sr567-front-tire (select 110/80/16) Extended Display Bar Mount - amzn.to/3RWaMIl Rotor Disk Spacers: amzn.to/45PGTiM 72v 34AH Battery - powerfullithium.com/products/72v-cadmus-battery-ride1up-revv-1 Thumb Throttle - amzn.to/4crZ9RQ Phone Mount - amzn.to/4cOETcG

[@LucasTheDoofusridez]

Why does the motor link you provided only sell 20" wheels? Aren't the revv1 wheels 16"?

[@ronnythompson9115]

Instead of removing the 2 screws from the battery/controller door. Possible you could have flipped all 4 screws around so the nut faces out and the beveled head is inside the door. Then cover them with a little foam.

[@brentcollins9727]

Without riding gear and torque plates, I’m just gonna test it out gently. 40 miles later, screaming with excitement. 😂😂

[@MrCentralDriver]

50mph oops 😬 😊

[@KillyyTV]

Also said "we're not going on the main road" 5 mins later on a main road 😂 W content

[@TheWelbeckTeam]

Kids do as I say, not as I do. 😂

[@MoXplant]

As a DRT owner I appreciate you big time dude. Love your content and appreciate everything you do for the E community 👍🍻

[@MrCentralDriver]

I appreciate that!

[@cowetareserve]

The cut to the bike making you taste the sun was hilarious. 😂

[@nagashizzar3978]

UGGH!!! I cannot WAIT to do this to mine!

[@joeberginc7415]

There different width bottom brackets to push that crank away from the tire. Also, if your chainring has allen bolts, you can use spacers to push the chainring out.

[@charlescole-p9v]

Any 'pass thru' wiring should be double heat shrinked to insure no wire abrasion.

[@kirkslayden834]

On that washer on the rear wheel take a thin piece of cardboard with the exact hole that the spindle is and push it around we're supposed to fit and take a pin in market where you want to get it removed it's the same thing as making a template but first you need to get your moc up and when you got that square lay it over the washer and cut out what you don't need Simple as that oh and another thing don't use a Dremel go to harbor freight and get one of those $10 hand grinder and grab your washer with a pair of vise grips that way you don't cut off your fingers or cut your hand get a little bucket of water and dab it in there now and then while you're grinding to keep it cool 😎 haha that's the easiest safe way to do that

[@Sheerwillpower]

Man it's just as hot there as is here in Arizona

[@cocoabiscuits]

Id love to do this but I won't make the time. I get too impatient for stuff like this and then even after many run into issues and have to take it apart again to see what broke.

[@WyomingRider]

Awesome job! Can't wait to see it when you're completely done!

[@housedjnyc]

That is a REAL NICE color! I’ve been looking into one of these after I finish my 3 other 72v builds.

[@MrCentralDriver]

Go for it!

[@robertsilva5041]

Looks amazing. Outstanding job Sir

[@MrCentralDriver]

Thank you kindly

[@LAGRIND]

Did you take the Shinko to a shop to install because man I can't install the shinko without damaging the rim.

[@MrCentralDriver]

Mine has marks from the tire levers. It's a painful job

[@swarbrickjesse]

@@MrCentralDrivershinkos are a piece of cake. it’s so easy, try doing a city grip.

[@roger3958]

Having just gone through my own 72v conversion on a different bike I can say this is a great video! For my chain, I had to take the derailleur off to fit the torque arms so I’m just riding on the smallest 14t gear of the freewheel and then I shrunk the chain down and it fortunately fit perfectly. If it wouldn’t have fit I would’ve added a link and gone up to the 16t. There’s not a whole Lotta peddling going on though lol 😂 FYI a 120/70 16 shinko fit mine fine. Finally MAN your bike looks so much better than my folding ebike. #jealous

[@MrCentralDriver]

Thanks for the comment. Yeah sometimes things don't fit. Just need the chain for legal reasons. I wish they made a 120/80/16. > like the taller tire but a tad wider would be dope. I think they do make that size. I think that would have looked dope.

[@chrisMc1972]

Can you please measure axle to axle on this bike and compare it to the Super 73 RX

[@timmiller9116]

Killer build. I used a similar NBPower kit on my fat tire bike. It is scary fast. I got it up to 54 mph without going full throttle. I'm not sure max speed. It scared me a little.

[@xxjimmahoxx]

Can we do one for the RIDE 1 UP RIFT Please!!!!

[@jamesbronz]

Great video, so I subscribed to see what your going to do in the future. Thanks for sharing

[@OneEyeGamer]

Can we see this dont to the EUY K6 PRO???

[@anthonysuarez7416]

So awesome!

[@OneEyeGamer]

Why cant you use the stock controller can someone explain

[@ebike_tinkerer]

Great how to build video, thanks for doing this!

[@MrCentralDriver]

Glad you liked it!

[@louietramposch4559]

No helmet and sandles are an east coast thing. Represent 🤟👽🚲🎬

[@mariosalazar6552]

Nice build. I want to convert my drt to a 72v later on. If i do can i still keep the drt tires instead of the streets ones?

[@MrCentralDriver]

You can. however be careful going that fast on those tires

[@mariosalazar6552]

@ those tires aren’t ment for that type of speed? It’s just that I like how it looks with those knobby tires plus hitting up hard dirt trails .

[@ramseyahle1766]

Wouldnt having the controller so close to the battery cause heating issues

[@MrCentralDriver]

With all the vents in the cage it's perfectly fine. The motor on the other hand is cooking.

[@ramseyahle1766]

@@MrCentralDriver lol thanks for the reply, wish you the best & hope the bike turns out all good

[@OXXY-76]

Why did you go with the 3K motor on the DRT and 5K on the street version?

[@MrCentralDriver]

Just to do a different setup.

[@jaybones614]

Is the kit you got the 20" kit? Ebike rim sizes be weird AF.

[@MrCentralDriver]

20x4 wheel. Tire is 110/80-16

[@jaybones614]

@@MrCentralDriver thanks and that's what i figured. I don't know why they don't use the actual size for the rim. Ordered one from China and it was too small. Live and learn

[@SippinCycles]

hey u ever do anouther rev1 up drt let me know I'm looking to buy one

[@Londonbridge978]

You can’t just use stock motor?

[@burn1gotbeats]

Cool build thanks for sharing 👍

[@rickystafford7433]

is there a way to get more power without replacing the motor?

[@MrCentralDriver]

No. Batteries can't handle anymore than 40 amps.

[@lionelsanders180]

Is it better than Gg_x

[@farjamh3756]

What's the noise in suspension time? I have this problem.

[@SippinCycles]

was interested in this bike to...I might like the lyric graffiti x a lil better but very cool bike

[@consiglieremusick9079]

LOL 😂@ the thumbnail!

[@MrCentralDriver]

😅

[@kirkslayden834]

You should have some kind of stand to hold that bike up just something simple I was thinking about if you put the wheel on a vise but you would need a bench That way it would be up high and you don't have to work on the floor

[@MrCentralDriver]

I'm at my office. To hot to work in my garage. I have a motorcycle stand. I mentioned it in the video

[@kirkslayden834]

@@MrCentralDriver okay you can make one single stand that would work in your office I'm just saying

[@hc2cox]

What's the total cost for the build?

[@TRAVIS28943]

I love all of the reviews. I’m trying to trade in my Hey Bike, Mars series one for a ride one bike. I need more power 20 miles an hour just is not doing it over here. Washington DC more power.

[@eliteteam6096]

Can i use this same vid for the regular full suspension one?

[@MrCentralDriver]

Yep

[@androsmilenionful]

That frame is easy to make a battery that fit in, probably a 40ah.

[@Necrofear]

Since the C3 Strom Deluxe and this bike are similar in many ways do you believe i could use this guide to turn my C3 to a 72v system

[@anthonysuarez7416]

Finding a proper battery to fit in the C3Strom's framespace might be a hassle

[@MrCentralDriver]

Yeah. You just gotta figure out a custom battery and we're to mount the controller

[@เสือดํา-ผ6จ]

Its possible you can do it to a C3 Strom if its FS. But how like Anthony had mentioned the framespace would be the issue or you would have to invest into a custom battery to be made for it. C3 Strom

[@Necrofear]

Thank you guy’s i appreciate you all

[@corywebb5537]

I have a question for you. If I bought this scooter could I use my 52volt 26ah,battery from my kickscooter.. It is made for a dual motor but the controller is one single plug.I think 30 amps to each controller.But still couldn't I just use it?Instead of the original battery for more range?

[@joeberginc7415]

If you don't know the continuous amps, just try it and see if the bms kicks off. Stay close to home... If it does kick off, just put it on charge and the bms will turn back on.

[@chrisMc1972]

How many amps is that controlling 80 or 100 ?

[@MrCentralDriver]

80

[@JohnLeitch-sq4fs]

You make It look to easy.

[@MrCentralDriver]

It is

[@charlescole-p9v]

The arrow, on the tire is showing it's revolving in the wrong direction. You'll have to flip the tire !

[@kirkslayden834]

Instead of cutting that cage piece off I would have drilled a hole for the round piece to fit in there perfectly that way you wouldn't have had to cut the cage. I'm just saying

[@MrCentralDriver]

Did it the easy way. Everybody is welcome to make this set up better and take more time on i than I did.

[@eliteteam6096]

What's the range with that battery?

[@MrCentralDriver]

New video coming Monday on the first ride. Should be around. 35miles full throttle.

[@JacobyIan]

Can someone please lean me one way or the other toward getting a FS or DRT. Their website says the rear rack is not compatible with the DRT model. What are the major differences other than the Rear Suspenssion and tires? I really wanted that rear rack on there if anyone knows of any good 3rd party ones I would definitely just go with the DRT model ugh why do they have to make this decision so hard.

[@MrCentralDriver]

the DRT is a longer and since the rear rack attaches to the top and bottom of t he frame i bet the part doesnt line up to the new extended frame. This has spoked wheels instead of mag wheels. bike is lighter. thru axle up front. different front forks. different rear suspension. different seat. Drt is taller. only downside is no turn signals on the drt. the headlight is non adjustable on the drt and you dont get full fenders

[@KSIxBluntRoller]

Anyone made this build ? I’m thinking about making it I just want something that can go 50-60mph I can ride to work

[@simonfarmer48]

hi there i need some advice i have an ep2 pro ive changed brakes to hydraulics from the mechanical ones now i tried to change the throttle to the thumb throttle but it will not work this is the second throttle ive bought and no joy can any one help.

[@MrCentralDriver]

Some thumb throttles don't communicate with the stock controllers. Look at the numbers or model number on your original one and see what replacements will work for that model.

[@simonfarmer48]

@@MrCentralDriver thank you for that will look into that also I love your content that's wot made me get into ebikes

[@Paulfarmer-en4vh]

Do not use Ali Baba

[@ELECTRICBIKEDIYLIFE]

That's weird that they put the motor's quick disconnect somewhere it's not easy to get to. It kind of defeats the purpose.

[@MrCentralDriver]

It's a cleaner setup but makes it more of a pain when u got a flat for sure

[@JOESSECRETGARDEN85]

Are you selling this

[@MrCentralDriver]

No

[@Timbodacious]

3kw? am i missing something it should be around 5kw?

[@MrCentralDriver]

The motor is 3000w

[@E-RiderHub]

There are many different hub motor kits. Most common ones are the 5000w and 3000w. He indicated he's already installed the 5000w a few times before so he wanted to switch it up

[@txtualyt]

Just price checked everything and damn.

[@MrCentralDriver]

Or buy this one $4000 😝

[@venlu382]

@@MrCentralDriveryou selling this? If so i am interested.

[@TheWelbeckTeam]

I bet it feels like riding on a cloud.

[@MrCentralDriver]

Once the front tire goes on

[@chrisMc1972]

3@@MrCentralDriver is the suspension way better than the super 73 RX?

[@freeagendalowcountry]

Is this the same guy that did motor bikes reviews in a recent past wearing a long beard?🤔🤔

[@PhantomPanic]

$1,900 Just for the battery? LOL That's almost the cost of the whole bike I want. 🤣

[@MrCentralDriver]

It's a high end custom battery. You can get others just get your dimensions correct and order something.

[@kirkslayden834]

Kaboom ha ha ha ha ha ha ha ha ha ha ha that's funny 🤣

[@MrCentralDriver]

Jump scare

[@jaysonW7]

Dude how much you want to build this for me jk no joke?

[@Jazzmarcel]

ebike porn!........where is the link for those jackets? beautiful ebike!

[@MrCentralDriver]

BEYOND RIDERS CLOTHING 10% OFF Use Code: MrCentralDriver bit.ly/3eKXC05

[@johngranato2673]

21:14 made me jump and cuss. Btw, why not just buy an e-motorcycle? No offense intended.

[@MrCentralDriver]

motorcycle you need an m1 license. registration. tags, insurance. these are legal if you follow the laws like everything else. and you have the extra power to have fun. its also nice because a motorcycle i cant take into my work (grocery store) but i can take a electric bike and also charge it for free in the back as well if i wanted.

[@johngranato2673]

@@MrCentralDriver That's why I chose the FS over a motorcycle. I did so, because, while I am in great shape (genes), at 65, I don't have faith in my abilities to ride a gas motorcycle anymore. The tags and insurance were not a concern for me. I also looked at electric motorbikes, but these were either too expensive or damn ugly. I was looking for a electric motorcycle that looked like Yamaha V Star 250 (which I had planned to turn into a bobber). Anyway, I enjoy my FS and my other toys. I enjoyed your video. Stay safe and don't get old, my friend!

[@Godzilla_aka_KingKong]

great work, i like it!

[@MrCentralDriver]

Thank you! Cheers!

[@powchainsamaniego6744]

Not world first 72volt evv revv1

[@MrCentralDriver]

I did the first revv1 72v and now the first 72v DRT

[@coolshariq]

Geez !! Invest in a bike stand you shouldn't have your bike laying on the floor while your testing 🙅

[@MrCentralDriver]

I have one! Just not at my office.