MRCP BILE DUCTS PLANNING. "HOW I DO IT"

[@t.m.ayyarin8388]

Thanks for this. MRCPs is one of those procedures I struggle to get my head around. Not sure why. It just doesn't compute in my head. But your explanation and demonstration made it so much easier to follow and understand. Thank you!

[@msuspicious-tj4ny]

Bac, you are brilliant and so informative! Thank you for your easy going style while still educating us! You are the Man!

[@zonlolita2421]

You are the best genius in MRI ever

[@CARL-dx4mi]

Thank you so much, sir. This is very helpful for me especially I'm just starting my career in MRI.

[@beatricesammons2723]

This is very helpful and you explain this procedure very well and very thoroughly. Thank you. Hope you will do more in the future. Vascular MRA would be interesting.

[@tonyeze7233]

Great job! I work with GE scanner and sometimes i think Siemens is better on mrcps. I guess i just don't like the free breathing technique no matter how good u position ur navigator

[@bobbywong2287]

nice to see breath hold mrcp

[@charmainebondoc7735]

Hello! Can you make a elbow when planning and positioning and techniques? Thank yyou

[@richardperez9476]

Excelente video y una manera diferente de como se hace la planeación.😁👌

[@Nguyen_MRI]

Thanks for your words. 🥰

[@dallasfisher1694]

Thank you too much! Very helpful. Please keep making more videos.

[@Nguyen_MRI]

Thanks for kindly words

[@mohmadshakeeltantray2084]

Great

[@ralucahantar6502]

Thank you! Can't wait my next MRCP 😁

[@dieptuandung2035]

Thank you bro for your instructing video. Could you plz distinguish principles between liver dome scout and phase scout?

[@gracefulonthetrail2244]

Can you please tell me the software version you are using here? I'm in clinicals and the hospital I'm at uses this with their 1.5T Aera and I'm not familiar with the icons and their meaning. The tech there doesn't know what version of Seimens software it is. I was hoping to find info online with no luck. Thank you for doing these awesome videos! It helps me a lot!

[@Nguyen_MRI]

It's Siemens E11e software. You probably have similar E11 also.

[@luigiperico3331]

You are the best

[@Nguyen_MRI]

Thanks for kindly words. There are many great techs out there ☺️

[@mudassirma8097]

Informative video..👍

[@davideghiselli1751]

Very useful, thanks from Italy mate

[@Michael_Logan]

Hi Bac, great channel! Is there any chance you could upload a pdf with the parameters for your triggered MRCP and the bh MRCP? I saw that your triggered had a base time of around 3 min, ours has almost 6min, would be great to try out yours.

[@Nguyen_MRI]

Please provide me your email or contact me on this one: [e-mail]. I can provide you then.

[@ashishbhandari8673]

could you please send it to me also

[@72DIMOS]

Lovely, just lovely

[@Nguyen_MRI]

Thanks for watching and kindly words. 🥰

[@Donaldian2]

Thank you so much! This is really a big help! 😀

[@Nguyen_MRI]

Thanks for kindly words.

[@douglasg1780]

Exellent..

[@ashokkumarsharma1021]

super

[@mahboobehsheikhi]

Hi Bac. Thank you for share your knowladge to us . I have a question. I work on siemense 3 T in liver transpalate center . I have problem in 3D space . Becuase my patients have asitise . If i change TE to 400 in 3tesla is it work? My protocol take 4.30 s in 3 Tesla i dont have a short TR

[@Nguyen_MRI]

There are many key factors for having a good mrcp. Firstly is the patient patient. Secondly is the technical part along with coils and patient positioning. I use te around 400ms.

[@blackswun]

Thank you so much! This is really a big help!!!!!!!

[@bam1411able]

thank you for good explain but can i ask u how long take 3D MRCP trig and can you please show us the parameter also how you do it BH 3D MRCP

[@Nguyen_MRI]

Resp trig takes everything from 2-5 min. Depends on patients breathing pattern. Bh is used with caipirinha.

[@TAHA-TOUABA-RADIOGRAPHER]

Thank you so much pro

[@abdomohammeddarwish]

Thank you

[@ngcindy9578]

Could you make a video about brain perfusion technique and post processing?

[@islamabdelgowad3175]

Hellow Please can you make Spectro & csf flowmetry Planning and processing Thank you very much

[@Nguyen_MRI]

kzbin.info/www/bejne/r5ish6p3bpyLe8U

[@Nguyen_MRI]

kzbin.info/www/bejne/poWvfJqAq9eDf9E

[@fakenamefakesurname5005]

Wow, holy shiet, i'm working with siemens and never understood what was the purpose of the haste cor thick because it always turned out bad and now i know why! I was doining it all wrong!😭

[@Nguyen_MRI]

Awesome now you know ☺️👍

[@tonyeze7233]

Hello Bac, Do u work with GE as well? If so, can you highlight more on how to use and adjust a Navigator better on GE's? What could make a navigated pre- dynamic sequence on abdomen look good, but not on the post contrast since its the same sequence ? just wondering..

[@Nguyen_MRI]

Hi Tony. Unfortunately, I don’t work with Ge scanners. This sounds strange your problem mention here. Should work as the same pre post navigator though.

[@julesannieton]

Could you also demo the pancreatic duct scan ?

[@Nguyen_MRI]

Yes have that in mind also in the future

[@mdasifiqbalrakib7410]

There is a lot of learning from your video by the way if you don't mind if you could write down what you say On the other side to your video it would be very helpful.plz plz plz plz

[@Nguyen_MRI]

Is it possible to turn on subtiles?

[@mdasifiqbalrakib7410]

@@Nguyen_MRI I'm not sure??????

[@mdasifiqbalrakib7410]

@@Nguyen_MRI tse tra mean

[@mdasifiqbalrakib7410]

@@Nguyen_MRI Yes That's what I wanted you to understand subtitle

[@Nguyen_MRI]

@@mdasifiqbalrakib7410 there is automatically in KZbin. Just turn it on

[@tranthanhha9358]

thank u a lot for the video but u can tell me about respiratory trigger technique.

[@Nguyen_MRI]

Thanks. This approach I used was liver dome. Most standard one been for many years and on older software. Then you have what is call phase scout which is the more newer version of navigator.

[@tranthanhha9358]

@@Nguyen_MRI thanks.

[@dharampalvaidhya5523]

Thanks Bro👍👍

[@badrlinux6786]

first, i will thank u for the well done video and the explain, Good Exam and Technique. please keep it up and more video for breast with whshing/washout te :chnique or a perfusion in brain with siemens software analysis. hop u are well and keep it safe #corona. Thank u bro👌

[@Nguyen_MRI]

Thanks for your kindly words. Yes more to come. 🥰

[@SC-gh6gd]

Muy bueno brah 👍

[@basemalshraideh2893]

Can you do mediastinum MRI plz

[@alisonpinfold125]

Hi Bac. Would you change the parameters at all @ 3T? (TR/TE) Thanks

[@Nguyen_MRI]

Good question. In general the physics behind 1.5T and 3T are different. So yes I do that.

[@tengteng4579]

Bac . I have been trying to set a protocol for a breath hold MRCP. I tried to copy the protocol you had but I always end up with a 1 min and 32 sec. time breath hold. I adjusted all the parameters but I can't make it to a 15 sec. BH. Please help. Siemens Espree.

[@Nguyen_MRI]

It can be difficult without possibility to use caipirinha.

[@Donaldian2]

do you have any tips for GE scanners? Thank you!

[@Nguyen_MRI]

I don’t have much experience with GE scanners unfortunately. But will help as far as I can.

[@bcampbellism]

Great explanation! Did you make a video planning pancreatic duct?

[@Nguyen_MRI]

No I haven’t yet. In my future plans. Thanks.

[@mdnurnabi8336]

thanks

[@antoniocognato5023]

Question , are you a doctor? I had an mrcp done, came back negative but want a second opinion. They did it with contrast and with out.

[@Nguyen_MRI]

hi, no im not a doctor. im the one who acquire these images for the doctor to do the reports.

[@antoniocognato5023]

@Bac Nguyen ohhh, ok. But you read these clearly right. How accurate are mrcp images ? Like I said, I had one done, with iv contrast, and without. They found nothing. Just looking for second opinion. I had a CT scan with contrast back in the summer and a full mri body scan in November. All negative.

[@Nguyen_MRI]

@@antoniocognato5023 I don’t read these. But I can see if the quality meet its need. Different modality such as mr, X-ray and Ct have its pro and cons. For bile/ pancreatic duct mr is good. Highlight the biliary pancreatic duct nicely.

[@sitirohanidin8638]

Hai..hello..can u teach how to do mra thorasic aorta..tq

[@haminh1714]

Anh ơi, sao có những lúc em chụp MRCP lại chỉ tăng tín hiệu của đường mật, còn túi mật lại không có tín hiệu ạ. Trong khi ở xung T2 tra lại thấy rõ túi mật căng. Em cảm ơn ạ

[@Nguyen_MRI]

Try to do it transversal plane also. Easier to cover.

[@santhanakraishnan4448]

Thanks Sir🙏🏻🙏🏻🙏🏻

[@franciscomorales15]

The in-out phase gre, is a 3d volume?

[@Nguyen_MRI]

Yes it is.

[@Fregra]

Topp innhold Bac! Bare å fortsette å lage videoer :)

[@Nguyen_MRI]

🥰

[@gyges182]

Can You please tell me for BH space Turbo Factor, Base, Phase and Slice resolution. Caipirinha Acc factor 3D is 3 with 24 ref lines? Amazing images 👍

[@Nguyen_MRI]

Etl 240, base 256, phase 80%, slice 50%, caipi 3 24 lines. My goal with this Bh is not having it isotropic. Just sharp in one plane

[@xmaslove1361]

thanx a lot

[@AHMEDElsayed-ie9is]

Plase How to perform an MRI of the kidney veins

[@gasmiadnen2676]

Hi! Can you tell me how to work as a radiologic technologist in Danemark??

[@Nguyen_MRI]

I don’t live in Denmark. So I don’t know the rules there.

[@gasmiadnen2676]

Sorry I mean Norway because you work in oslo 😅

[@Nguyen_MRI]

@@gasmiadnen2676 well i guess you need a bachelor degreed in radiography. also norwegian language as well. besides that im not sure if you need anything more

[@farmanahmad-bu2xf]

There is any video's abouts t2 star map for knee cartilage

[@Nguyen_MRI]

No not from my channel yet.

[@antoniocognato5023]

How can I get an mrcp on myself? I need to get a referral. Anyway online to get a dr referral? You gotta be your own advocate on your health. Please let me know.

[@Nguyen_MRI]

I guess visit your doctor first then he can get an appointment with a MRI site.

[@monalisachakraborty4433]

How to plan 3d urogram space sequence res trgg..

[@mustafa0titi]

Great man , thank you 👍👍👍

[@SanalksSanalshaji]

Hi boss,pl let me know the 3 d mrcp trigger sequence planning and how to reduce the acquisition time,because whenever I am doing the time will more than 20 min. I am using skyra... Image will coming very bad.if there any solution for this,pls let me know.thanks

[@Nguyen_MRI]

Have you tried the original one from the siemens tree? Shouldn’t take that long.

[@SanalksSanalshaji]

Any respiratory tricks is there?

[@Nguyen_MRI]

@@SanalksSanalshaji just as I show in the video. Proper position and patient information. Do they breath proper during scanning?

[@bluepheonix8868]

thanks bac! could you share wih us care bolus in breast imaging? TIA

[@Nguyen_MRI]

Thanks. Unfortunately we don’t perform mri breast imaging. So I don’t have much experience in that topic.

[@Help.for.Radiology.Tech8367]

Sir I have 1.5 T Siemens MRI.I am really distressed MRCP thin slices respiratory trigger artifacts kindly rectify issue (like zipper artifact)

[@Help.for.Radiology.Tech8367]

How can I send you pictures of artifacts 😢

[@Help.for.Radiology.Tech8367]

I need your help 🙏

[@chengxinwan7881]

Hello, may I reprint your video on social media in China?

[@Nguyen_MRI]

Yes sure. Thank you for asking.

[@rockers9608]

I m also CT and MRI radiographer but I have to do job in abroad can u pls tell me about that ..

[@Nguyen_MRI]

I wish I could. I guess just apply like everyone else and check out the rules for that specific country.

[@rockers9608]

@@Nguyen_MRI ok thks...

[@aymanmuhammad1610]

I'd be thankful (mri Siemens sempa 1.5t software learning to operator plz) عرض النص المقتبس I'd be thankful (mri Siemens sempa 1.5t software learning to operator plz) عرض النص المقتبس

[@Demetriy-nt8mf]

I think its way over complex we have much easier breath hold radial that covers all ducts biliary and pancreatic

[@Nguyen_MRI]

Many ways to the same goal 👍

[@drdeb_ocherry]

U r darling!

[@srinu5008]

foetal mri scan send me bro

[@zakihafez4378]

thanks

[@TAWATAWATA-o4w]

thank you so much pro