File fitting rings to properly gap. Hope this helps

[@ScrewbyD00]

This video probably just saved my 734cc build. Thank you @MrCuervoRacing

[@clintonmattingly]

What type of oil do you like to use during the break in period?

[@labryze2]

I have a 10:1 cp with a stock bore. I went over on both top and bottom rings. It was supposed to be .020 top and .025 bottom. Im at .025 top and .026 bottom. Is this too large of a gap for the top ring?

[@AllanSmith859]

What would you say the maximum ring gap can be on the top and second ring

[@spencerwilliams6399]

So what about the 105.5 big bore cylinder does the top ring gap have to be 18-20 thousandths as well? What do you recommend

[@notwerudy869]

If i order from you are they going to be filed already?

[@sjlopez9065]

What's the blue tool called and where could I get one?

[@MrCuervoRacing]

Piston ring squaring tool

[@everythingloud4068]

I have a 2019 raptor 700r and once and a while when I put it in reverse it won't engage right away then starts to click and then finally grabs within 2 seconds is this normal this is my first raptor thanks

[@MrCuervoRacing]

Slip the clutch a little as you are shifting into reverse, this will help rotate the cogs to drop in.

[@everythingloud4068]

@@MrCuervoRacing ok thank you I do most of the time sometimes I forget and it does that. And right off idle sometimes it will cut out when I get on the gas do I need a pipe and power commander to fix that or would that AIS plate I bought make a difference on that?