MAKING HOME-MADE HYDRAULIC PRESS 10 ton

🔔 SUBSCRIBE to my Secound KZbin channel link here..
/ @balkanmrdkdiy4741
Thanks to all..
🔔 For more DIY Videos press the link ..
• SIMPLE HOMEMADE ELECTR...
✅ And here ....
• MAKE A USEFUL DIY TOOL... \
Building homemade hydraulic press 10 ton
How to Build a Hydraulic Press 10 Ton
by Mr.DK DIY
SUBSCRIBE LIKE AND SHARE !!!!
My FB Mr. DK DIY page: / youtubecrator
My Twitter page : / dejan_bmb
My Instagram : / mr.dkdiy
All of my DIY videos I have done for experiment and my challenge, if you make these videos at home and something happens to you I will not be responsible for anything !!!
Welcome to Mr. DK DIY channel
My channel include of guiding videos:
-DIY
-How to make
-Awesome ideas
-Tips....
✅ Thanks for watching!
🔔 Like, Share & Subsribe my Channel
Thanks for your Support !
#mrdkdiy #hydraulicpress #diyhydraulicpress

[@MrElyrobson]

hello Mr. Dk Diy. I'm watching your videos here from Brazil, and I'm also subscribed to your channel. I am grateful for your willingness to share some of your knowledge, which is helping me with many ideas. Thanks.

[@MrDKDIY]

I thanks for Nice comment

[@gabrielhernandez8952]

Necesito la medida de todos los cortes para ser la prensa

[@gabrielhernandez8952]

Por favor

[@innovationtime20]

Hi I'am ali khademan .I recently joined KZbin and I need your support. If you feel that my videos might help you with something, I'm very glad to Subscribe me even for a limited time. Thank you

[@mrjatt6233]

@@MrDKDIY uu

[@sonnyxlbright5904]

Thank you for making this video which takes the mystery out of making your own hydraulic press. Now, I can go ahead and adapt it to suit my needs. I am planning on building a system which takes two jacks over an extended platform. The finished product would be motorised to really take advantage of the double jacks in the set-up. So, yes, thanks again for sharing your knowledge.

[@Bolts2021]

Well done This reminds me my dad made similar press back in sixties.He was automotive engineer had his own garage so this was quite useful.Sadly he passed away in 1996.I must say he was genius in inventing new ideas.

[@user-gk1ff4by7i]

Дело мастера боится. 😂 реально боится. Запрессовать подшипник не через оправку а через внутреннее кольцо, сломав сепаратор и согнув шары, и потом крутить на пальце, удивляясь, почему не крутится. 😂 я себе такой же пресс сделал из домкрата на три тонны. В общем при выпрессовке ступичного подшипника уголки усиленные вверенной в них трубой согнуло как масло. Сверху усилил тем же уголком домиком кинув с верхней точки биссектрису в место опоры домкрата, там выдержало. Так что одноразовая штука, так сайлентблоки прессовать. На десятитонных прессах опора детали из стали около сантиметра. На работе такой стоит)

[@stevenjackson7067]

Where's the parts list ? Telling what size steel you used would make this a super video. But it's still great. I was getting to buy one, now I'll try to make my own from the material I have laying around.

[@pamelakaygorman4435]

Would this frame accommodate a 20 ton press or could it be beefed up enough to be used for a jewelry press?

[@LCMSRJ]

Congratulations by your beautiful work and tool. I liked very much! Successes in your personal and professional life Hugs from Brazil

[@sankarsathriyan3626]

சூப்பர் good work 🇮🇳🔥

[@nogueira8455]

Belo trabalho !👍👍👍

[@hankypanky9380]

nice job, i totally agree with William Castleberry. thanks for the share .

[@user-cg8mx8kw4v]

домкрат хватит и на 2-3 тонны, т.к. угольники больше не выдержут, а вот за отдельную подсказку опцию зубило - отдельное спасибо!

[@aboalaofeyafathlmenahsanan5767]

Very good. Thank you for your job

[@francp0139]

Super travail belle presse👍👍👍👏

[@reginaldobatista2458]

Magnífico!!!

[@moosakda4890]

May I ask what's that fiber cutter brand and model? It looks compact.

[@atphan9663]

tôi không phải thợ chuyên nghiệp . nhưng đả xem video của bạn . mình cũng đã tự tay làm 1 bộ với con đội 6 ton cũng quá ok luôn . cảm ơn bạn 👍👍👍

[@kasimirerobert5576]

Great Job, but am not Good with the C channel Greeting from Uganda

[@seujocas7955]

Great Job!!!! From Brasil!!!

[@fernandorodrigues5097]

Parabéns!tudo de Bom...

[@nicolassaby9385]

Bravo pour ta super presse hydraulique 👍

[@MrDKDIY]

👍

[@josedearimateia3969]

Amei a ferramenta.. Valeu 👍✌️🇧🇷

[@TheGoatShowMan]

Well done. Brief additions as to size of material and length of cuts would be terrific. Looks like 1 1/2” angle iron and maybe 1 1/2” x 3 1/2” tubing? But what is the length of the vertical tubing and the length of the angle iron, etc? Thanks.

[@Aalsayyed]

I like the vedio very nice where can i buy the springs because i am trying to buld one thank you

[@michelboisvert5684]

hi man, very good idea and I would like to make my own one but the problem is that it's taking measurements, or I could find them, no measurement I can't do much

[@MrDKDIY]

👍😉😉👌✔

[@inouawal5311]

A great idea, necessity is the mother of invention ،thanks

[@MrDKDIY]

👍👏

[@hugosaavedragarrido1740]

Es una muestra muy práctica de mucha utilidad

[@nikolaromanos456]

Excellent, I will make my own too., thanks.

[@lucianodamascenaaraujodama8073]

Muito bom gostei da ideia

[@bellopez]

Buen curro, ha quedado genial.❤

[@davidsauer6286]

Do you give a material list and dimensions?

[@MiguelReyes-lr4vl]

Thank yuo for makin this video excelent

[@MrDKDIY]

👍😉

[@geraldofernandes4727]

Ótimo trabalho! Excelente idéia! 🇧🇷 Brasil

[@AO-ow6tt]

Nice job. Adding information on materials used and detailed measurements would be useful.

[@meandcaleb5004]

Did u know d material ang measurements?

[@MeatPez]

The tolerances on those measurements don’t really warrant an itemized list. It’s really just up to who’s making it.

[@tssa5466]

Great video. What thickness of material are you using? Looking at building one similar. Thanks and keep up the great videos

[@manoelargmirodasilvaargemi6364]

Está de parabéns

[@rssikh]

wonderful work

[@styvesolano7895]

muy bueno me sirve de maravilla saludos amigo ciudad de mexico

[@amandahugginkiss9119]

When looking for bottle jacks my sure you always pick a good brand like big red or noreco. I’ve only ever used those but I pick houses up with them so I figured they are pretty alright

[@colones5867]

Que electrodo utilizas, estaré atento a tu respuesta. Genial, muchas gracias.

[@alexandroqueirozdasilva1583]

Excelente parabéns muito criativo 👍

[@MrDKDIY]

Thanks

[@johnmar1622]

Very talented. I wish I have the same patience. 10/10

[@clifc6351]

Smart AF! Just Brilliant!

[@MrDKDIY]

👍👍😉

[@catacata8589]

Felicitări pentru proiect!!👍...Romania..

[@wenceemendoza5135]

nice video... what is the size of angle bar and square tube?

[@user-dm2rn7ij9w]

Отличная работа. 👍

[@prasannakumar8832]

Good job,but it moves like pendulum if you will not stable it at the bottom .I think bottom side hight increase or and + type support for two legs makes it more stable.

[@victorlora1537]

Me gusto excelente

[@rocco2028]

Trés bonne idée merci je met ça en pratique tout de suite.

[@dhanrajgattugattu1789]

Good job use fully hydrilic Press 👍👍👍❤❤❤

[@mpalaskokkalis1476]

Τέλεια η κατασκευή της πρεσσας .

[@MrDKDIY]

😉👍 Thanks for Nice Commnet !

[@mpalaskokkalis1476]

@@MrDKDIY οκ.

[@markotenorio4328]

Excelente vídeo queria fazer uma prensa aprendi através desse video.

[@user-tc8rv2pr8p]

Ну как ? Сделал пресс такой и как работает ?

[@wilianalvarado]

Calidad amigo, bendiciones

[@moisespereira6947]

Vc está de parabéns Mestre

[@ishsiriram6646]

Nice one, I like this design because you don't turn the jack over. Thank you for sharing...from South AFRICA

[@GianniPirolaFaidate]

Nice project Bro 😉👍

[@MrDKDIY]

Thanks 😁

[@juarezpereirapereira3151]

muito pratico e eficiente.

[@noyacat7269]

Hi man, your job is awesome like the idea itself. Hope for you the best. Bravo.😁

[@MrDKDIY]

Hey, thanks!

[@juliopedianta2918]

Muito bom mesmo!! Paranaguá Paraná Brasil!!

[@innovationtime20]

Hi I'am ali khademan .I recently joined KZbin and I need your support. If you feel that my videos might help you with something, I'm very happy to Subscribe me with ID ''INNOVATION TIME'' and support me, even for a limited time. Thank you for your support.

[@manu-jx5nc]

Excellent

[@TheDgm89]

Muy bien elaborada, pero no debes hacer presion al rodamiento por la parte interna porq se daña, pero esta muy bien hecha 🔥

[@davidcespedes9071]

Demaciado bueno que lastima que no da medias....saludos

[@sabiralam7649]

Spring kaha se mile ga

[@monikastojcevska5846]

Good work❤😍💓

[@MrDKDIY]

Thanks 😄

[@kalihitino]

Very resourceful, pallet table, vise and grinder converted sander, all business

[@francisbrackney2061]

Nice job Man 👍.

[@Diego-md4pt]

Excellent video, very well explained. I shared the measurements and thicknesses of the irons used. I send you greetings from Argentina

[@MrDKDIY]

Awesome, thank you!

[@guillermovaladez1075]

muy buen video,estaria mejor si diera las medidas y material utilizado(espesor,diametros,etc,etc),pero en general bien,gracias

[@smartap]

Hi I am having a query. Why springs are attached to it? What purpose it will server ?

[@prasanthtly8550]

Congratulations Thanks sir

[@MrDKDIY]

👍👍👏

[@meandcaleb5004]

What material did u use can u give d size?

[@prasanthk2478]

Very Good Congratulations

[@tristancox872]

What are the measurements on the pieces or iron

[@fabiomarques7608]

Parabens...... Muito bom!.... Fábio Pio. Brasil

[@kirankumarsiramsetty3745]

Thank you John very good work very nice keep the boy

[@sergioosko337]

Congratulations 👏👏. Very god my friend. top of the galaxies. big hug to all of the channel😃👍👍👍

[@najaksum1912]

Super video 💖💕

[@MrDKDIY]

Thanks 🤗

[@ayushdash4107]

Kindly give description and measurements of this mini hydraulic.

[@joelongstaff7601]

Great video. Why is it no one ever adds what material was used so we could see what the cost would have been?

[@carlosmerino8446]

Muy buen trabajo

[@joaomachado8029]

É show gostei 👍

[@sergiocosta4123]

Muito bom, a melhor que vi, parabéns. Vou fazer uma,obrigado

[@MrDKDIY]

Thanks, where are u from bro??

[@sergiocosta4123]

Brasil

[@MrDKDIY]

Nice bravo Brasil 🇧🇷🇧🇷🇧🇷

[@sergiocosta4123]

Tks, very much friend

[@MrDKDIY]

U welcome

[@BenDieselBasicAutomotive]

Thanks for the knowledge

[@barriejones15]

Thank you for this, maybe add material measurements next time?

[@josedearimateia3969]

Eu Amei...

[@rayatempetahu]

Luar bisa Sungguh simpel dan mudah

[@user-lj6zv7up7c]

Make some more of this amazing tools that I am interested of making

[@user-ps7mi9og8n]

Спасибо автору познавательно.

[@vavanvavanov9705]

дружище здорово ты всё делаешь и ровно и красиво .но вот непойму ход твоих мыслей зачем ты швеллер в основания загнал? для тяжести? или устойчивости?там где хватило бы 30 уголка ты мощный швеллер впорол а где будет всё ломатся и гнутся там дряхлый уголок? не просто интересно. я не придираюсь но где логика?

[@silvassilva3015]

Boa ideia, salve brasil

[@ArcticFlies56]

Very cool! Can you make it with out welding?

[@MrDKDIY]

yes i can

[@Manavsain00]

Hidrilic jack kitne ka hai

[@luis43096]

gostei muito rapido eficiente

[@TimsWorkshopTJY]

What kind of filter you use on your camera when welding?

[@MrDKDIY]

I using my editing programe for filter when i welding 😉👍

[@TimsWorkshopTJY]

I see, The reason I asked is one KZbinr pointed out the welding had messed up his camera over time so I thought you have put a filter over the lens before welding

[@konanvarvar6801]

Hi from Ukraine! I like the idea.

[@MrDKDIY]

Thanks Ukraine 👍🇺🇦

[@salvadorrodriguez4814]

Muy buen trabajo

[@mohammadkaleem2487]

Super

[@uceniluge3556]

Mnogu dobro👏

[@MrDKDIY]

✔👍

[@user-sx8hd7md2y]

Конструкция интересная, но домкрат лучше установить снизу, что бы рабочее пространство было перед глазами.

[@tobiasandersen1168]

Thank you Becuase of you i tryed to make one by my self 💪and i did :)

[@waalan1053]

Tq for technical value.

[@karthicsivaji8517]

Good job

[@edisnascente5755]

Maravilha ideia

[@celular-ep3ol]

Thanks, congratulations!! Far from, Celaya, Guanajuato, México

[@MrDKDIY]

Thanks for watching!