Free Energy Generator from Dual Spring Mechanism | Mr. Electron

[@mrelectron_alternator]

Hindi Version : kzbin.info/www/bejne/r4mygXeKe8yCqc0 English Channel : kzbin.info/www/bejne/fZWnc4R7nt2tnbMsi=RnH8Z2gpoATeWUAz Please watch full video before posting any negative comments 🙂

[@gfashraful]

I watch your 3 channel videos

[@mrelectron_alternator]

I thankyou for that 😊

[@valentino_govoni_official]

i will sir

[@sealaluuuumakmur9994]

Hi Sir,, Please remove one spring, and try again. May you check it.

[@biosolutionsgermain4649]

At minute nine, you should check the balance and the weight of the wheel respective the weights of the spokes holding the wheel concerning the resting position of the entire system That the wheel in the resting position it is in equilibrium position, is not well aligned with the crankshaft in the transmission axis. So, you should check the forces and momentum’s of the system

[@seanrh4294]

the sound playing backwards is a cool feature of this invention

[@stew1tx]

People have to learn about the laws of physics for themselves. Most think they can create stuff that brilliant minds before them tried and failed to produce. Kudos to you for stating that fact

[@puits-de-science]

The fact that some people believe this story prove that we still have a lot of way to go in basic education.

[@mrelectron_alternator]

Couldn't agree more.

[@RODOLFO.M.S]

A falta de conhecimento não é impedimento pra descobrir se é verdade ou mentira.

[@omairazamora9492]

He visto varios vídeos de este tipo y me sorprende que haya personas que defienden estos "proyectos" de energía libre e infinita. Algunos hasta se molestan mucho. Es increíble como a estad alturas del siglo,nos dejamos envolver tan ingenuamente. Con razón los políticos nos siguen cambiando espejitos por votos.Que desgracia!!😮

[@deadspace6604]

Если плохо учиться в школе и не учить физику, жизнь будет полна чудес и волшебства)) 😂

[@paradoxoperpetuo]

É muito triste isso. Temos toda a informação ao alcance mais a ignorância parece ser mais atrativa.

[@a64738]

The secret is to hide the batteries and engine, or just play the video backwards of the wheel slowing down where it speeds p because reverse...

[@A523-m4y]

Обратное видео творит чудеса

[@IsJustCookieGo]

Fr

[@kildertoussaint]

It does work. He didn't put the counterweight on the flywhere what will keep the spring engaged

[@ТеймурХан]

Bu bir neçə saniyə fırlanmanı ,təkrarən uzun müddətli montaj etməkdir.

[@REDWhiteblue-uh1zp]

I am building an electric car. I have scrapped that idea now. I'm building one of these motors to run my car. I may put a center support on the crankshaft. Use heaver spring to give me more torque. Now I can get to work for freezyee!!!!

[@universeisundernoobligatio3283]

If you want free infinite energy? Just run an extension cord to your neighbours outside outlet. Easy.

[@yogidemis8513]

Or move back into your parents house!!

[@brian56]

@@yogidemis8513yeah,there's less chance of them unplugging it!

[@MichaelKlineJr]

Actually, the best proven form of free energy is creating a electron antenna to collect free range electrons from overhead power lines. The trick is that they have to be assembled on your own property but outside of the easement of the high power lines. There's apparently a company that powered itself for almost 50 years that way.

[@brian56]

@@MichaelKlineJr that sounds like some Nikola Tesla stuff right there!

[@MichaelKlineJr]

@@brian56 well I saw it on a KZbin video and read about the company in the comments so feel free to look for it

[@fisterhr]

The laws of physics can't be broken. Give it up.

[@philosopher1a]

LOL ok did you watch the video ?? he says that ..... however , did you know the heavier than air machine can actual fly ? keep mind open

[@KennethScharf]

@@philosopher1a So can pigs!

[@tonymoon7230]

Sorry bud, E T has already proven that "laws" of science can be broken. We just haven't caught up yet. No law is immutable!

[@williamholness2089]

You just only understand primitive concepts of physics. It's the application of known physics in the unique way that achieved your desired result. Laws are meant to be broken.

[@tonymoon7230]

@@KennethScharf Only if equipped with a rear mounted flatus unit having a decent amount of thrust 😂🤣😅

[@HYCAD]

It is not Scam; your construction is faulty. Considering the weight of the flywheel, there isn't enough tension on the springs to pull the flywheel so it slows down gradually and comes to a stop. Secondly, the springs are not properly positioned, if they are spaced widely apart at the base along the rotation of the flywheel, you will achieve a better result.

[@ЯрославТищенко-ц5ы]

😂😂😂😂

[@paradoxoperpetuo]

🙆Meu amigo, não precisa acreditar em mim não, não me entenda mal por favor, mais procure por si mesmo e descobrirá que é fisicamente impossível esse tipo de "ciência" e não passa de desinformação qualquer conteúdo relacionado a "motor perpétuo", "energia grátis" ou algo do tipo. Assim como existem vários projetos milagrosos do tipo na internet, também existem vários outros como o cidadão ai que nos fazem o favor de explicar o que deveria ser óbvio mais infelizmente não é.

[@gheorghegalsan5743]

AIUREA !!! ARCURILE ORICUM LE POZITIONEZI FRÁNEAZÁ ROTATIA .punct:

[@User2718218]

It IS a scam. There is an AC power wire that connects to the standing fan from the top. How come you can't see the top of the fan in the original video? The answer is that if you could see the top of the fan you would see the AC power wire going up and outside of the top of the video frame.

[@francisap1632]

Lol @ you

[@kildertoussaint]

It works. You forgot the havy counterweight on the fly wheel. That's what makes the spring engage every turn.

[@МаликОсманов-э6л]

Вы сделали такой двигатель?

[@DirtyDieseldude02]

It’s bittersweet Mr. electron. The real magic is in the video Production. I think the main take away from these videos are that 1.3 million people watched. although I do enjoy the Indian “MacGyver”, fabricate free energy out of a wheel and a welder…. Physics always wins in the end.

[@Robert-d5l]

To make it look as if it's speeding up, you play the video backwards. You can walk backwards in the recording then play it backwards. It will look like you are walking forward.

[@emilbelgica2284]

Ang tawag po jan ay perpetual motion, para magawa yan, kailangan ay perfect balance to the center, kung patayo ang gagawin, di kayo makakagawa ng perfect balance, dahil po sa gravity, mas mabigat ang lower part kaysa sa upper part, kung maglalagay naman kyo ng tension spring, kailangan balance or equivalent sa total load ng flywheel, so need ng proper computation, at kahit maibalance mo pa rin, ay hihinto pa rin yan, dahil sa gravity at dadagdag lang yan sa force ng gravity, At sa ganyang experiment walang magtatagumpay jan,lahat yan pang content lang, ang maniwala sigurado na budol, Pero walang hanggan ang talino ng tao, para sa mga trying hard, subukan nyo ang ganito. 1, i defy nyo ang gravity ng center wheel or flywheel. Paano ? Pahiga or horizontal position ang flywheel. Dapat balance, pano malalaman, dapat walang wiggle ang flywheel. 2. Dapat ang tension spring ay vertical din, para contra sa gravity. Kung galing sa center ng flywheel ilang inches ang gagawin mong pedal na kakabitan ng tension spring, dapat ay ganon din ang tensin ng spring. Sample from center of flywheel ,to middle of flywheel ay 3 inches, (circumference), at ang wieght non ay 1/4 kilo, dapat ang tension ng spring ay 1/4 kilo din. Yan ang magbibigay ng continous motion, Ang total wieght ng flywheel minus 1/4kilo, yan ang magiging speed nya. 3. Kung nabuo nyo na yan. Dapat smooth ang ikot nyan. Pero ,dipa pwedeng kabitan ng load yan. Check nyo ang movement, pag umabot yan ng 3 to 6 hours na hindi huminto pwede na yan, wag kayong umasa na hindi hihinto yan, hihinto at hihinto at hihinto pa rin yan. 4. Pag nakuha nyo na, na di huminto ng ilang oras, ska nyo lagyan ng kaunting wiggle yong kabuuan, tulad ng tumba tumba chair ni lola. Pero dipa pwedeng lagyan ng load. Successful example nito ay ang automatic watch. 5. Paano maglag

[@emilbelgica2284]

5. Paano maglagay ng load? Wag kyong maglalagay ng load sa flywheel o belt papuntang load, pag ginawa nyo yan ,basura na ang project nyo. Tuloy tyo, extend nyo ang shaft ng flywheel, at maglagay ng pulley sa dulo ng shaft, bago maglagay uli ng flywheel bago ang load.

[@jecozpierce3939]

Boss mag pa Plano Anong gumawa ng ganyan, pwede mo bakong matulungan kung pwede ba talaga Yan?

[@МаликОсманов-э6л]

Вы на 100% уверены что он работает?

[@dannoland]

Thank you for being honest about the "free-energy device." It is ironic that while watching your video, it was interrupted by an advertisement. The advertisement began with a few seconds of a free-energy device like yours with 4 springs and a fly wheel. But the man on the video was claiming that there were better free energy devices than solar panels. He talked for a while without revealing anything about what he was offering, then he asked viewers to click on the watch button. I clicked skip at that point. Of course, I do realize that what he is offering is a scam. It is sad to me that KZbin allows scammers to advertise on their website.

[@deco27istrash]

0:15 i can hear the reverse audio

[@tesemaourgecha226]

Thank you so much. I saved my money from such fake spring mechanism.Thank you Mr.Electron. I will communicate for any help.

[@johnh7500]

Thanks God in the beginning i though that you gonna sell it for free energy device. My respect for your projects just increased ! There is still hope for this world. A little but there is!!!!

[@mrelectron_alternator]

@johnh7500 You honor me 😊. Thankyou!

[@johnh7500]

​@@mrelectron_alternator You know especially the moment that you are hammering with the saw was priceless and was the moment that I started to suspect where things goes😃!!!

[@mrelectron_alternator]

@johnh7500 Ohh!! I remember 😃

[@johnh7500]

​@@mrelectron_alternatorLet's get a little Serious now,I have a kind friendly request for you: I start to make the power supply like your project with the microwave transformer. Well after the bridge rectifier and the big capacitor What I need is a suggestion for adjustable voltage (0-28volts) and current (0-100Amps) regulators (two pot/mters). I mean I have seen a lot of these circuits separately and especially for voltage but none together especially with current of 100amps. I believe that is something easy for you(to not say boring) and If you have something in mind that works please don't hesitate to send it!

[@mrelectron_alternator]

@johnh7500 the easiest way that i find is to connect a dimmer circuit to the input high voltage side of the transformer. This will give you a controlled output voltage and current.

[@snowcrab888]

Au début j’étais vraiment très septique (un peu comme la fosse…😀) sur le fonctionnement de cet appareil. J’ai donc décidé d’en construire un pour de vrai comme tous gens qui ont vu cette vidéo. Et là je suis resté émerveillé devant cette invention qui permet de fournir une Energie gratuit et inépuisable. Ensuite j’en ai construit deux, puis trois, dix, cent, millle. J’ai converti les habitants de ma ville, de mon pays… qui maintenant produisent leur propre électricité. Le président des États Unis m’a personnellement téléphoné pour me remercier d’avoir sauvé le pays. On m’a même proposé le prix Nobel de physique pour mon invention qui a changea face du monde… Depuis cela la terre arrête de se réchauffer, le niveau des océans baissent, il n’y a plus de pollution. Mon cancer est guéri et j’ai même un début d’erection quand je regarde toutes ces années de recherche . Bref merci beaucoup car Albert Einstein était vraiment trop con de ne pas y avoir pensé plus tôt. Ok l’infini n’a pas de limite, par contre la connerie humaine ne s’arrête jamais…

[@erdisongiat1687]

🤣🤣🤣🤣🤣

[@mendozajoe40]

Iam a truck driver and installed a spring motor in my truck,dont have to buy gas again,ever,,thanks for this video

[@pjdruz5636]

Haha! I installed a spin wheel with 2 gerbils in it. I have to feed them but it's cheap

[@priyanshsuthar5861]

Thank you so much for debugging this kind of scams and saving our time & money 🙂 firstly I thought that it is a reversed video and he is scamming us but later you revealed the truth 😄 ( sorry for that )

[@mrelectron_alternator]

😊

[@kildertoussaint]

It does work. He didn't put the counterweight on the flywhere what will keep the spring engaged

[@priyanshsuthar5861]

@@kildertoussaint I don't think so ... because the spring won't be able to rotate that heavy flywheel 🙂 correct me please if I am wrong 👍🙂

[@DOBIEMAN]

Try installing one spring on the opposite side so that when one spring stretch u get a recoil and it makes the other spring in the opposite side to stretch

[@lookdawg187]

Adding a spring just adds drag. The machine will lose efficiency moment you start adding springs.

[@uchesamuel4026]

I believe this is not scam, with proper arrangements it will work

[@nesh4tubes]

There is no proper arrangement. It will not work. The laws of physics are unbeatable.

[@shelbyseelbach9568]

LMFAO

[@carlossmart188]

@@nesh4tubes The laws of physics were created by men who wrote what they wanted and hid the truth. The Discovery channel has a video where a couple of men discovered electricity (high voltage) from the earth. The Discovery channel will not risk its reputation on scams. Similarly, the medical industry said the only cure for cancer are radiation and chemotherapy. Big lies. There are many natural cures for cancer and I'm a cancer survivor after nine years by using natural cures. The medical industry said milk strengthens bones and teeth. That's another lie from the livestock farming industry, after WW2 when the British government stopped buying milk to send to the soldiers at war. Doctors have found that milk causes fractured and easliy broken bones. So you can't beleive every law written by men.

[@carlossmart188]

@uchesamuel4026, Mr. Electron is also a scammer on some of his other channels. He makes generators from fan motors that have very fine wires and claim they produce 10000 and 15000 watts of power. And that's impossible

[@JK-zl7vv]

I thought the springs were not set at 180 deg apart but set at 90 degrees like a stirling engine, and a counter weight is put onto the flywheel to counter the springs which is what keeps it going, please look at the other videos a little closer, and build it like they do, then test it again, to see if it works or not. 😁👍

[@mrelectron_alternator]

Ok

[@deangermeten5629]

@@mrelectron_alternator I've seen some with an odd number of springs. and adding weights to the flywheel. Is not supposed to be balanced, but a resonant mechanical oscillator. kzbin.info/www/bejne/e3fdoIWpm6Z0m8k

[@paradoxoperpetuo]

Não funciona amigo. Não precisa acreditar em mim, é a física que diz e deveria ser algo tão óbvio que chega a ser triste ver tanta gente tendo que explicar porque não funciona.

[@eugeneparan3029]

Ryt

[@igorfirstov4158]

Hi! the force of the first spring is 1, the force of the second spring is 1, 1-1=0. As a result, we do not have free energy

[@mrelectron_alternator]

As simple as that 😃. Correct !

[@milanjovanovic852]

And friction on second sprind rotate

[@ossalomheleno248]

a third sprng is necessary to do like others did

[@Roq5Brdv]

инерция маховика...

[@igorfirstov4158]

@@Roq5Brdv инерция быстро закончится, когда не прилагается энергии для этого

[@nhloniphonyawo415]

If its your passion, never give up. You made it. Modify!!!!

[@kildertoussaint]

It does work. He didn't put the counterweight on the flywhere what will keep the spring engaged

[@JockOStreet]

It will work he is not interested in working hard enough to figure it out tho , becuz he wants to sell the product that he is peddling at the end of the video.... Just another example of how greed can hold us back in life

[@KMK2022]

The concept of spring generator is good, however there are some inherent flaws, these flaws can be resolved, need a trail and error to refine , as you have explained these are used in industries , there are some improvements required. 1. The Spring generator with 8 springs at 45 degrees each is a good design for running heavy alternators to produce energy, even the flywheel to be heavy and in equilibrium with the springs tension, need to take high quality springs, how this works is when it rotates an alternator it produces a desired energy, and from that same energy , we need to add a motor to rotate the flywheel whenever the flywheel reduces its required spin the motor will support the rotation , few electronics are also required to take into account like speed sensors and automatic switches when the speed reduces the motor will spin the flywheel to compensate the loss and when inertia acts and makes the flywheel to run at the desired speed the support motor will just rotate without power. means to make the spring generator successful we need additional inputs and use of electronics and some variable frequency drives... to help the world the get energy....

[@DsychoLen]

Thankyou mr.electron for proving this theory.. Yeah it temp me alot. Thinking of wasting time if i can make this too.. but now no.. no more

[@midastouchinteriors8058]

The skeptics also have their way, but for me I see it's possibility.The potential energy given to the first spring is transferred to the flywheel that in turn transfer it to the second spring as the first reloads.This can then continue indefinitely if friction against the moving part and the counter wt of the flywheel is less than the overall kinetic energy.

[@carlossmart188]

@midastouchinteriors8058, Mr. Electron is also a scammer on some of his other channels. He makes generators from fan motors that have very fine wires and claim they produce 10000 and 15000 watts of power. And that's impossible.

[@TroySavary]

The friction is less than the initial kinetic energy. That is why you get the few initial turns. But that's not the point . No new energy is being input, so no matter how small the friction is, it will eventually bring the device to a stop. The energy input needs to be greater than the friction to keep it in motion, but there is no new energy being added.

[@fernleystephens2436]

When the thing is stationary you can see that each spring is pulling in the crank equally which means they are cancelling each other and not adding any energy to the machine. All the energy involved came from the man and as soon as he goes home for lunch the thing will stop.

[@Sy-vp7wt]

Thank you for revealing the truth to people I don't think there's a source of energy coming out of nowhere.

[@kennethpaschall6811]

In all honesty this is getting interesting the springs keep it moving from what i can tell

[@heinzpg]

No. Springs are not a source of energy. If they deliver energy, you only get back the energy which was needed before to extend them.

[@zygmuntbielawski946]

Didn't you notice it slows down and........ eventually stops

[@scottwylde8528]

You said "here you can see that the engine does not work". Actually that is NOT an Engine! Good video, Thanks. 👍

[@thomassnyder7605]

Gotta love the welded bearings that can't turn. Bet his welding sandals aren't OSHA approved. 😮

[@BernardoTutoriales]

Lo que hacen en los vídeos asiáticos, que tan de moda se ha puesto esto de generar energía gratis, incluso solar con CDs, es impulsar la rueda con muchísima fuerza, utilizando una cuerda enrrollada a ella y tirando. El artilugio, que lleva cojinetes y está muy bien equilibrado y engrasado, tarda varios minutos en detenerse. Entonces es tan sencillo como reproducir el vídeo al revés y parece que el movimiento de la rueda empieza muy despacio y va adquiriendo velocidad. Estos usuarios son muy poco cuidadosos (trabajan en exteriores, en el suelo y con muy pocas herramientas) y descuidan muchos detalles. Una vi un vídeo de este tipo en el que se veía a un perro andando hacia atrás 🤣🤣🤣. Al ser en exteriores, detalles como este ocurren cientos 😆 ¡Muy buen vídeo!

[@АлексГром-и3л]

The springs should be at an angle, you have them right under the shaft

[@litebuzzkill8551]

This thing powers my house and barn, thank you perpetual energy

[@ТеймурХан]

Bu ideya yuxu görmək kimi bir şeydir.

[@REDWhiteblue-uh1zp]

I am building an electric car. I have scrapped that idea now. I'm building one of these motors to run my car. I may put a center support on the crankshaft. Use heaver spring to give me more torque. Now I can get to work for freezyee!!!! Oh, no. I came back and watched the end. Now i see why car isnt wirking. After all that work. So i cant use it for anything? Waisted all that time and material. Well at least i can still vote for Hariss and Walz.

[@ernestcook4285]

If and a big IF, energy generator if it can sustainably produce more energy than its motion

[@Donno1-v5q]

I think it's possible that you've missed something, it's because you haven't tensioned the spring properly

[@paradoxoperpetuo]

Não amigo, movimento perpétuo e energia "grátis" é fisicamente impossível mesmo. É apenas isso mesmo.

[@WilliamNorth-r2p]

the fly wheel needs to be un balanced perfectly...right?

[@SINANOZYOLDAS]

Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs about angular continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will take firm steps with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet. 98% of the published videos are wrong and do not work. I know the mistake they all make.

[@valdecir2258]

Pq parou. parou pq esta alinhado e tem q ser forma de ( Y ) assim acredito q vai ter continuidade. Parou pq não tem o outro eixo com mola para puxar novamente

[@SINANOZYOLDAS]

@@valdecir2258 Whoever builds such a system, the rule to understand is simple. You cannot produce energy without getting energy from outside with a disc that rotates continuously and whose angle does not change every second. Of course, if you try this, you will understand the subject better. At least 2 different resonance angles are needed to generate energy. This video system has 1 fixed vibration resonance. Therefore, it acts as a kinetic capacitor (temporary energy storage). It does not provide additional energy to the system. Everything is within physics. There is no energy created from nothing. Existing energy is used in the best way. Gravitational energy is present everywhere. In my design (ARES), the robotic and mechanical system, whose angle changes every second, provides this.

[@valdecir2258]

Q eu quero dizer q existi uma possibilidade de funcionar sendo em Y. Pq parou. vc viu q parou pq não existe uma continuidade q seria a terceira mola em Y pq esta em linha. E... de fato ainda pode não funcionar pq isso emita os pistão q existe em veículos a gasolina. Mais ali existe o alternador q é carregado em uma bateria q vai ter continuidade. (roda se com a mão) na falta de um arranque onde se coloca a chave do veiculo. Se colocar um motor ao fim dos eixo pode funcionar pq estará dando continuidade com agora o motor funcionando q vai estar ativo. "Pode" tendo uma bateria funcionando dando energia ao motor q coloca funcionando como um alternador. Sendo em Y e as molas derem estas continuidade com apenas a a força das molas e vc colocando um motor antes dessa roda e um outro motor ao fim dos eixos pq a energia q o motor + eixo girando dando força ao motor ao fim dos eixos q estará tendo continuidade ao motor primário q continuará dando força ao primário q o primário dando energia ao segundaria motor q fará q fique funcionando. Sendo um motor primário e alternador secundário ao fim dos eixo. q os fios carregara a bateria ou manterá a bateria funcionando carregadas. primeiro um motor elétrico + a roda q seria o arranque. alternador ao fim dos eixos devolvendo a energia q faz o motor elétrico funcionar e alternador devolvendo a energia q esta sendo gastada a bateria q estará sempre carregada não deixando q pare de funcionar. O RAPAZ DEU UMA IDEIA MAIS NÃO CONCLUIU Pq do jeito q vemos não funciona

[@SINANOZYOLDAS]

@@valdecir2258 I want to create a clean energy system for a cleaner world. No mechanical wheel system whose angle does not change can produce energy. No system will work against the laws of physics. You can promote this project in your country. I want to realise this project and get a worldwide patent. Of course, I need a solid and idealistic investor to realise these works. I convert angular energy into mechanical and electrical energy. I am an inventor. I am ready to realise this project in any country that will support me.

[@SINANOZYOLDAS]

​@@valdecir2258I want to create a clean energy system for a cleaner world. You can promote this project in your country. I want to realise this project and get a worldwide patent. Of course, I need a solid and idealistic investor to realise these works. I convert angular energy into mechanical and electrical energy. I am an inventor. I am ready to realise this project in any country that will support me.

[@electronicartis]

finally someone put this stupid free energy idea to rest.

[@oybekhamidov9672]

Odamlar yolg'on frbgarlik yulga utb borgan sari vjdon Qaeta trlmaydi

[@JairoTorres-ko6hx]

Ud muestra el destello de la soldadura; es lo mas asqueroso que se ve. Eso se ve en todos los videos, no es nada nuevo.

[@GerhardMondaga-qn8wi]

Wow Good job, Beacuse the plywhell Connected to Dynamo to produce Current😲👍

[@waynewells-t6w]

It may work if you add magnets to the wheel and a counter magnet under the wheel to keep it spinning.

[@billatkins4302]

Energy can neither be created or destroyed . But we are in fact “close to perpetual motion

[@stevencartlidge6574]

So, are you saying my SOLAR panels are not creating energy from the sun? Please explain...I'll wait.

[@billatkins4302]

@@stevencartlidge6574 no ,that is not what I said . But regarding your comment regarding SOLAR panels : No, you are not creating energy, you are harnessing the energy from the sun and manipulating it into “usable “ energy with solar panels , inverter, batteries , etc… Keep up your work though bud …cool invention !

[@123clis321]

It's so cute! Like that lady who made wind catchers in twister

[@glendekoker3682]

The Russian car shop put a spring motor in a Lada it did drive but at low speed had 6 springs and very large flywheel?

[@NooB4Anskyi]

Yes, we can😎 Thank you😂🤗

[@antonqwer3140]

Примерно так и работает , сам на ней езжу

[@robbmaier368]

Well the problem with yours is the position of the coil from one to the other has to be positioned at a advanced angle

[@paradoxoperpetuo]

O problema é que as leis básicas da física parecem estar cada vez mais sendo esquecidas e a internet está se afundando em um mar profundo de desinformação. É triste que seja necessário tantas explicações do porque projetos de "energia livre" e "motores perpétuos" sejam todos falsos.

[@siuchov]

Прикольно. Человек освоил монтаж ролика в обратную сторону

[@mendozajoe40]

The more springs you put the more horse power you will have,use 100 springs for 1000 horse power and 800 ft lbs of torque

[@chalkao5071]

Thank you! Finally someone makes practical sense.

[@salman_aljaadny]

سوف أوضح بعض النقاط حتى يعرف من يشاهد هذا الفيديو حقيقة الأمر أولا مبدأ العمل صحيح ثانيا أن الحركة الأولية التي اعطيت للثقالة هي سبب دورانه ثالثا أن الجرور او السسته تساعد في حفظ جزء لابأس به من الطاقة الحركية الأولية التي اعطيت للثقالة رابعا يمكن لهذا المحرك أن يستمر في الحركة لبضع دقائق فقط او ساعة في أحسن حال وذلك مستحيل لان ضغط الهواء والاحتكاك يأخذ جزء من الطاقة وهكذا تنفذ الطاقة التي اعطيت للمحرك في البداية. وسوف أضع هنا فكرة لوجه الله لمن أراد تطوير هذا المحرك بهذه الفكرة أولا يراعا في التصميم ادق التفاصيل بحيث تستمر الحركة أكبر وقت ممكن ثانيا يتم اضافة محرك صغير ذو عزم قوي يستطيع تحريك الثقالة أو يعمل على استمرارها بعد اعطائها الدفعة الأولى يدويا بحيث يكون استهلاك المحرك اقل من كمية الطاقة الخارجة من المولد الذي يوضع على الثقالة. هذا ماعندي والسلام.

[@oldmanpatriot1490]

I always thought those motors were off. but close.... Now that you have proved my theory was right, Have you added a wheight to the wheel to make the wheel lopsided like a hit and miss motor? Of course if you put the motor under load, you would need stronger springs and a heavier wheel weight. this is why hit and miss motors use a combustion engine

[@alfredhabia9606]

Elastic Energy have its limitations where it can bounce for a certain time but come to a stop/ rest. However, if you continue to act opposing the opponent force when it hits the maximum state at the right time, it continues at constant movements speed bouncing up and down. Basketball player bounce ball when it reaches at its maximum height. surface of the ground and players hands are two important element would be replaced I'm not an expert but it's all about reality we would consider.

[@alf4714]

Encore un magicien ! Il devrait enseigner en ecole de physique parce que l'on n'y apprend rien de tout ça !

[@LookingForANameToUse]

Have you tried with 3 springs?? And even number to balance out the pull

[@romainmerceron8633]

Thanks for your video, but two opposing forces cancel each other out, it's the basis of physics. In your experience, you have to think about unbalancing these forces to generate a movement, like the principle of an electron in a battery. May be, i can do mistake.

[@diaadianafazendinha.7375]

Muito obrigado por esclarecer esse projeto.

[@MARKHafley-wx9zt]

TANSTAFFL-There Ain't No Such Thing, As A Free Lunch. Fact!😂

[@TroySavary]

The energy in the stretched spring is not enough to stretch the second spring to the same degree, because some is lost in the form of heat.

[@nazaribinismail4548]

THE MONEY COMES FROM THE VIEWSHIP, ..THIS KIND OF INVENTION COMES FROM THIS ONE COUNTRY..

[@hardeepsingh-le7xh]

Don't believe your eyes,,believe in physics,,don't believe in youtube,,believe in yourself.....

[@OutsideLookingIn84]

You know, i always thought this would be possible with the right comprestion of spring and magnets, bowing out at an exact time and back in at a gradual incline. You know, like push and pull at the right timing, might take 12 or more in a proper seareas to make it consistant , might even take some posatives and negatives in a 1/3 ratio

[@rogerdalton9987]

Bull sh*t!

[@MasterKenfucius]

And yet you totally missed the hidden batteries and motor! hahahahahaha

[@zardzk.5538]

Once perpetual motion activates it doesn't need an Assist to run. It will definitely work itself after installing the last Part..

[@gheorghepuscasu7790]

Bravo ,ai descoperit Sf. .Graal ...o sa dea faliment toti producătorii de energie 😂😂 De fapt ma gindesc sa inlocuiesc motorul dela mașină cu asta😂😂😂😂

[@mrmped1]

Business plan: use 100.00 in scrap metal plus some used or new parts, create video that makes thousands of dollars. 😅 the return on investment is good. Go to bank, or look for investors, get more money. Create company list on stock market, grow company, make more videos. (Don't sell anything, just videos) good business plan!! 😂😅

[@JanwarKali]

Generate lang, square tube, dipendi ilang layer Ang coil Ganon din Ang layer Ng square tube, pabilog lang Ang shape para don sa magnet na omikot o tolad sa clif fan..Yan Yung mga sekreto na malakas.. sa generator..don din paponta yang spring

[@haroldcolquitt5726]

You ought make a kit and sell it. How much power does it output. What can you do with it like pump water, etc.

[@dipinpravitha8107]

i think it will works with 3 spring arranged in 120 degree angle and fly wheel should be placed parallel to the ground, if a 1/3 rd of the rotation passes above 120 degree it experiences a pull or drift towards to the second spring, then continues to the third. it must be rotate parallel or horizontal to the ground, otherwise it will experiences gravity may chance to reduce the flywheel speed...

[@dipinpravitha8107]

the weight of the flywheel and the power of the springs are also a factor to the continued motion of the shaft, crank should have a 120 degree angle...pls neglect if it is a foolishness, m not a legend in physics...

[@kildertoussaint]

It does work. He didn't put the counterweight on the flywhere what will keep the spring engaged

[@dipinpravitha8107]

​@@kildertoussaint ya i think so, 90% it will work...

[@zygmuntbielawski946]

Good job exposing the video-loopers, anyone can see it slowing down

[@sagenarain1558]

Beautiful build, thanks for sharing.

[@Ali95.]

Эта конструкция схожа на американску политику и то как они высадились на луну

[@ajitdeshmukh8009]

If it realy works.... He should start manufacturing it. We are there to buy it.

[@mendozajoe40]

Free electricity is simple,connect to your neighbor without them knowing.

[@organickevinlondon]

and just HOPE your neighbor doesnt read your You Tube comments.

[@СедьмойСедьмой-х9в]

Пружины должны быть установлены под разными оптимальными углами по отношению к валу, еще надо учесть длину колена вала и жесткость и натяжение пружин , надо еще примерно рачитать вес, диаметр маховика в зависимости от того для чего будет использованно это усройство. Это не так все посто- нужны математиеские вычесления или переделывать это практически по разному добиваясь максимальнх значений оборотов.

[@lordblackwood9257]

фейспалм 😆какие вычисления?! зачем если это очевидная дичь

[@ЯсныйПерец-б8ж]

все уже вычислено давно dU=A+Q - первое начало термодинамики называется, вечный двигатель невозможен. Пружина всегда вернет меньше энергии, чем ей передано, часть энергии пойдет на разогрев пружины, хоть под каким углом, при любой амплитуде, при любой жесткости, хоть как ее покрась, смажь и т.д.

[@ВикторКургаев-т9м]

Ещё в 18 веке было принято решение не рассматривать проекты вечных двигателей ввиду их невозможности. А вы угол пружин вздумали поменять! Вечный двигатель может быть только одной конструкции! И он работает вечно! ВСЕЛЕННАЯ НАЗЫВАЕТСЯ!

[@delburtphend6016]

A flywheel can be made into an energy producing machine by having it throw a mass off of the circumference of the flywheel. Simply wrap a string around the circumference so that the flywheel throws the mass on the end of the string. All the momentum of the flywheel will be transferred to the small mass and the energy of the system will increase by tens of times. The speed of the small mass is very high and it could injure or kill. The energy of the small mass can be turned into gravitational potential energy and used to multiply energy.

[@arthurmchugh5184]

You know if you clean and grind the metal it will weld much better!!!!😊😊😊😊😊😊😊

[@Addad66]

Your springs are not angled enough to give pull to the crank throws....

[@ahmetsanli4913]

don't move on to the 2nd task without finishing the first task, finish 1 and then move on to 2.

[@barbaroelisorhernandez2428]

saludos,, vamos a comercializar este invento suyo en cuba?

[@MARGEMPALOMARES]

your project will not work because the 2 spring is stressed, the other spring must in relax position when the angle is down position..

[@mrelectron_alternator]

Yes, one spring is actually in the relax position when its in down position.

[@paradoxoperpetuo]

Não funciona pelo simples fato de que existe uma lei básica da física chamada "Primeira lei da termodinâmica"

[@TheLannyboy]

All we need is a Tesla tower and we will live like the tartars before the last reset in the simulation

[@bazzer621]

Positive that I see a hamster tail sticking out of the wheel 😂😂😂

[@richardst-laurent6660]

If two springs give that, then why not 4, see what you can power with it. Multitude of ideas. 🛠️⚙️

[@lookdawg187]

You'll get more power from it using 0 springs and just spinning it by hand, the springs actually reduce the power it provides 🤣

[@richardst-laurent6660]

@@lookdawg187 that reminds me of a perpetual motion machine. Nice science project

[@lookdawg187]

@@richardst-laurent6660 if you did science you know adding drag to a motor makes it non-perpetual.

[@richardst-laurent6660]

@@lookdawg187 there is always a drag coefficient, we haven't created a 100% friction free system, the concept behind the sring motor works but it's not the best, i have tried it, the most it did is turn a alternator, i had to put some gear's that would allow it to spin at a somewhat functional speed, still playing with it as a project of curiosity.

[@lookdawg187]

@@richardst-laurent6660 and what does friction translate into? Energy loss. Adding more springs means more energy loss.

[@ВладНикитенко-щ8х]

По технологическому процессу !собирал😊❤братан ты лучшй из тех кто до этого показывал такие же видео.за исключением одного !в том видео был генератор от машины и он вырабатывал 220.

[@Dj1Lawre]

You nailed the free energy scammer they just made them for getting more views=more money 💰💰🎉

[@richardst-laurent6660]

If two springs give that, then why not 4, see what you can power with it. Multitude of ideas. 🛠️⚙️ See if its possible with a vehicle cam shaft. 🤔

[@Privet222New]

Maybe the method you used was wrong and that's why it didn't work. Believe me, this will please those who do not want the idea of ​​free energy to succeed since the era of the genius scientist Tesla🤨🤨🤨

[@sundareshvenugopal6575]

Yes, but not without the wear and tear of the springs, so energy must always come at some cost.

[@SENATCEL22_4]

Se a mola funcionar bem por um mês já estaremos no lucro

[@sundareshvenugopal6575]

@@SENATCEL22_4 English please.

[@NatividadLazarte]

We r free for what will we do, do not envious from one to another

[@SharipjonAbdullaev]

Meni hayron qoldirgani oldingi firibgarlik soxta videolar sizni yurtingiz Hindiston va Pokistondan chiqyapti

[@Moxie4358]

Conservation of energy is a thing, energy has to come from somewhere!! And even if the springs were to work it won’t last due to the laws of physics!!!

[@rethabilemorapeli2319]

next time try to add 3 spring angled 120 degrees they could probably perform magic

[@Mynameisnobody3113x]

Nice stand when are you going to put something useful on it.

[@tommyd6621]

What are we going to do with the second law of Thermodynamics where entropy is involved? I guess Mr. Electron is going to have to re-write the laws of physics as we know them! Im definitely buying a Tesla now!

[@pattayaguideorg]

THE VIDEO IS PLAYED IN REVERSE AS IT SLOWS DOWN, APPEARING TO SPEED UP. ITS FAKE!

[@mikemcdonagh2049]

Thanks for exposing the scam

[@annoyingbstard9407]

Why does he bother including the construction part where he shows himself incompetent at any sort of metalwork?

[@KaseRice-f8p]

the hardest part of making a free energy video is how to reverse it

[@wambabillins7454]

well i hav not try this before but I'm sure it does work, may b u should b conscien about the weight of the flywheel and the number of spring!

[@sajibgazi9331]

Thanks for true information

[@mrhamburger6936]

These mechanisms always have some big heavy wheel attached to them

[@michaelwalsh7846]

Thanks, but you should have warned me about welding, I cant see the end of the video now!