How to enter hidden menu in BMW E39 (5-series service test mode instrument cluster)

[@scottsevil]

works perfectly just like you said. I've been looking at the in Celsius for over a year! thx

[@stanislav20]

How could I change the language to English...I unlocked the menu and after that I went to under menu 10 and when I tried to press 2 for English it stays on 00 D not moving. Please help!

[@captainfallsalotatppic2508]

I'd imagine the Bimmer plant locked the cluster because they knew people would eventually start poking around in the system's menu and end up screwing it all up and ending up with a cluster panel not working at all. It has a lock code for a reason. The only option I useful within the service menu is the cluster pannel test.

[@jedfehrenbach9470]

I am wondering if my check engine light works or not. I have a minor issue, possibly bad MAF, not sure. When I turn the car on (but not start engine) the words "SERVICE ENGINE SOON" light does light up. But it doesn't during the Test No 2 cluster test. Is this normal? Is my CEL the "SERVICE ENGINE SOON" message? I wonder this because it doesn't light up, although I have an engine issue, and when I go to test 14, I get 5 different DIAG codes. They are each 7 characters long (mostly letters) so not typical OBD2 codes. Thanks...

[@hamidfiero1429]

Is it possible to change langage ? My e39 doesn't have the gps, and i have putted an Android in it

[@JohanM1]

Only have the left button. 2002 520i. How do you do tests like these with only one button?

[@philipbruce6462]

I wonder if anyway to test the oil pressure light?

[@aLinuxIce]

how to change the language from german to english ? i removed the original navigation that the car has and since my battery dies its in german...

[@jayhyland1]

Did you figure this out?

[@marioperez-kb2wl]

Can this be used to reset the seatbelt warning? Had to remove the seat and seatbelt of course to fix the twisted seat now the seatbelt warning is constant.

[@Veemteem]

@@marioperez-kb2wl disconnect the battery. Wait about 10 min. Connect the positive and negative wires together for a couple seconds. Again make sure the battery is disconnected and the car has no juice in it. This will reset all the modules. It should work as long as ur seat belt is functioning properly

[@michaeltelemachus5112]

Very good, but what do the multitude of displays actually mean?

[@drog1595]

Exactly

[@heavyseven88]

What👀 I don't have two buttons on my instrument panel which year cars are you showing, me 1997, e39 m54

[@C3LM4RFG]

This is great! My car shuts down at "30L" of Diesel, now I can debug the problem! (BTW my e39 525 TDS anly as one left button, I did not need the code, but in order to unlock the other menus I had to turn the engine on). The #14 trouble codes appear if there is some "trouble" or they are always there? Thanks!

[@relaaaxingchanel3000]

Are you still alive? Did you solve 30L problem?

[@domiiiviel]

cool videos! can I also reset the oil service?

[@shefketmustafa9228]

Check Engin Lights Doesn't light up on this test! Is this normal or what? Thanks for the video!

[@mrfixpl]

Not 100% sure but it might be controlled directly from the ECU.

[@shefketmustafa9228]

@@mrfixpl Yes I have a funky issue with my very low mileage almost new e39 528i 1998. After driving 5 hours on the rain (like a mist in some parts) and parked in front of the house for 3 weeks (because poring rain and ice at nights). And when decided to run the car, had a longer crank than normal, engine start misfire drove it fir while and when stop engin shuts off. When wait for 20min. (cool down) it started no problem and after worm up stops again? Changed sparkplugs but still the same. No Ceck Engine Lights! I realised my Front Right Low Beam is buzzing and sometimes even lights up and go even with key in my pocket? Short Circuit somewhere? And after connecting with INPA Can see Engine management light is on (on my PC nit on the Clouster)? I'll do the Clouster test now ti see if will light up. Thanks

[@willsaund13]

@@shefketmustafa9228 I have the same problem. Check engine light never comes on even in test. I think it might be normal. Mine is a 1997 and it seems that some early cars have check engine lights that never light up

[@siacadp]

@@willsaund13 I have a 1998 model and the CEL does not light up, even on a test. I have the pre-OBDII connecter under the hood/bonnet and I did read that these models still use the older OBDI protocol and do not have a functoning CEL. Despite a section for it in the cluster.

[@cwx8]

Can the units for the odometer and trip be switch from mls to km? Mine are currently km, but I'm selling the car to a guy from the US. Is there a combo in EINHEIT that can be setup for this?

[@viteze635]

Não têm demostraçao em português? Tenho a porta da fechada e não tem fecchadura para abrir, os vidros de traz não abrem!...estou farto deste carro bmwx5!....

[@waverunner7063]

How do you exit this menu and go back to normal trip computer?

[@mrfixpl]

Ignition off.

[@paavoperamaki9074]

@@mrfixpl or hold the right button down again

[@anthonyk]

thank god I don't have a newer e39 with the ones that tell you everything that needs to be done

[@daskarman]

can you read engine codes this way -thanks

[@noahsark829]

what are the numbers under the display for gear selection.. for ? thanks keith

[@mrfixpl]

Not sure. Current gear if gearbox in manual/sport mode?

[@MrYoumakemegiggle]

When you shift the car manually, you see what gear you're in by looking there

[@abrahamgarcia1640]

4th 3rd 2nd 2st

[@wonyongkim6352]

Do you know how to change mile to km on the dashboard - e39?

[@relaaaxingchanel3000]

Same thing

[@relaaaxingchanel3000]

As in video

[@Koza_Cara]

Only for facelift or USA models because I only have the left button

[@bubble0]

I have a 96 528i EU and have both

[@DavetheRaveDinkum]

I have a pre facelift 540 with both oceana variant

[@jgripen969]

alekcandr baeyens 97’ 540 German made imported to Sweden. Got both buttons

[@kennycassandra5452]

me too. 528i 1997

[@trbossdoggy]

I have E39 540 and car does not start. I tought it was dead battery but it still does not start with new one, can anyone help ?

[@dansorescu9411]

mine had a coil problem.replaced it and it worked.try looking iinto that. good luck!

[@gitaarmovies2003]

If the car doesn't crank and doesn't start, you probably have a bad starter.

[@thooke222]

Happened to me once in my 540i, I had to hammer on one of the terminals a little bit because the connection was loose

[@773steve]

check fuse under air filter in hood and u may have flooded motor when u turn key keep foot on gas all the way and keep trying with foot on gas all the way if that dont work take out all spark plugs and put one tea spoon of oil in each hole from spark plugs then install back on and try again to start car

[@jgripen969]

Swolbraham Lincoln Could just be a bad crankshaft position sensor. It’s under the car. One screw and it pops out. It’s not hidden under the plastic cover, it’s literally right there infront of you.

[@Time4House]

Anyone who can help my E39 temp gauge stays pegged at red even when car is cold. Car doesn't over heat just the needle stays the. Please assist. It's a 540i 2001 Manual

[@mrfixpl]

Check if the temp sensor wiring is OK. Looks like signal line is short to positive.

[@Time4House]

@@mrfixpl will buy new one tomorrow and see if it helps, the plastic connector looks corroded

[@memedilzeu145]

What about the test 01 . What is it about

[@bagigilessi1665]

I cant read the temperature...

[@NeitciaSmania]

what if it says lock: on

[@MrOusama87]

My code isn’t working on my 2005 E53 N62 it still locked

[@BigMike-Soetoro]

Can I do this on a 2004 bmw x5?

[@mrfixpl]

i believe yes.

[@egdaful]

How to change E39 dashboard language from Spanish to English? :D

[@veesha6]

Lock code is on 21

[@ramilamrahov4392]

16?? Oil TEMP

[@fiestavision14]

My bmw e39 just has the left stik to push

[@simoutub]

Yes work perfectly thanks

[@mansonm1]

Can you change the language?

[@riobonito]

Muito legal!! Pelo test NR dá para mudar litros/100km para km/l

[@marioscrofani9380]

Mega geil von Mario Scrofani

[@emilian3874]

Hello. My BMW is a 520d, for EUROPE. The code is GU58916. As a result, the sum is 29. Last test nr is 21. What can i do? Thank you very much.

[@mrfixpl]

You need to go to test no. 19, and then enter your code (29).

[@hureyre22]

Its not working

[@bleopoldo]

Good to know

[@MoneyMayo]

Lol this music bumps

[@marioscrofani9380]

Mega geil von Mario Scrofani und giuseppe

[@endijsbusmanis6256]

Tnx !

[@sarahminifie8592]

Why make a video that I have to read!

[@mrfixpl]

Then this video was not made for you, obviously.

[@mikeychainsaw9760]

I have a 2001 530i is there a way to turn off the daytime light?