New Fronius Transsteel 2200

[@tomthompson7400]

Hi .. yes that helps .. a year ago I was going to buy one or the other .. in the next week I now have to buy one of them ... your reply has helped a lot .. these days uta about reliablity the day's of throwing in a diode set and a fan and getting another twenty years has come and gone .. mind you .. I couldn't lift my old murex into the back of my car either .. lol

[@MSWELDING]

But, I repair ewm machines that are 20 years old under the messa badge and a new SEMI PACK or DIODE PACK is perfectly acceptable and does give these machines a new life.

[@Migman2020]

ended up buying a transsteel 3500 and my god this thing blows away anything in that power range.. the thing short circuits so well that you look at the welds and assume it was done by a pulse mig

[@gordonturner8544]

useful review with good detail and info thanks very much

[@MSWELDING]

Thank you. It’s quite old now this video. I should really update it, as it has become our best selling single phase welding machine.

[@faronf2006]

@@MSWELDING yes would be nice to see a more current video on this machine . Is Fronius coming out with any machine soon to replace this model . Updated screen & possibly other features as pulse mig & ac tig

[@reedsfab3828]

Looks like a nice machine.

[@engjds]

Will it do 6010?

[@MSWELDING]

I have never run 6010s on this myself so I can’t say. Next time I’m with Fronius il give some a try

[@engjds]

@@MSWELDING A guy from fronius said it wont run 6010 or even 6011!, I am new to welding, but don't most pro welders use 6010/6011 as a root pass? if so it makes the stick capability a bit of a joke when I can run 6011 on my cheap Deko, was going to buy the transteel as well, think its still worth buying?

[@engjds]

@@MSWELDING I read people in pipeline work run them all the time, but for general welding, are they really required, or is it more down to preperation of the base materials?

[@engjds]

@@MSWELDING Got it today, yeah 6010 and 6011 sort of run, that is they are not as smooth as 70xx or 6013, I just want to know how to run spray transfer on it?

[@barrysteele8431]

When you run MMA mode you can adjust the choke [dynamic] effect to smooth the arc. To run spray arc in mig/mag, if running 1.0 mm wire you’ll need to be near the top end of the synergic curve and adjust the arc length (voltage trim in reality) positive until it sprays. If you struggle with 1.0mm you may want to drop the wire size.

[@JohnSmith-ho8up]

The latest models are only 230v. Be careful. Multiple Voltage is optional. Baz at MS Welding is the best in the business.

[@MSWELDING]

Thanks. Quite an old video this now. I will check out that info with Fronius this week. Cheers.

[@JohnSmith-ho8up]

@MSWELDING Do they need a yearly service to validate the warranty?

[@MSWELDING]

I would check the latest warranty terms supplied with the machine. Usually I would recommend a service with a test to IEC 60974-4 and a calibration f you require it. Not much to service on them though, so it’s a blow out , visual and a test. Like a suggest, check with who you bought it from. Hope this helps.

[@Deadthinker32]

Great video bazza

[@Migman2020]

hi whats the max amps your get from a 13a socket on the mig and tig function? and you never had it trip?

[@rogermirgard4100]

Nice video thanks ...dont know if i should buy Fronius transsteel 2200 or esab rebel 215ic....hmm

[@MSWELDING]

Hi Roger. You should get a demo on the Fronius, Don't just buy because of this or any video. Depending on your use, also seriously look at the EWM Pico migs. They do a pulse version that welds fantastic. www.ewm-group.com/en/shop/mig-mag-welding-machines-6420:portable-6434/picomig-180-puls-tkg/40125/product.html I don't work for any of these company's, we chose to sell what Is best for the customer In question. I hope this helps, Barry. www.mswelding.co.uk/

[@rogermirgard4100]

M S WELDING thanks! That EMW picomig 180 puls seems to be a great welder

[@roseironworks1393]

Hi i just bought one and sold a rebel .... much better machine !

[@weldingjunkie]

Or buy the HTP Pro Pulse or Stel depending on county. Synergic Pulse plus you can run 4043 or 5356 right from mig gun

[@singeray]

Hi, What gas do you use, 75/25 or 90/10?...What's about some tig welding?

[@tomthompson7400]

a year ago i asked the same question , no answer so ill ask again if you could only have one portable single phase multi process welder , spending your own money , would it be the pico puls 180 or the trsnassteel 220

[@MSWELDING]

Hi tom. Firstly I apologise as I don’t always seem to get all notifications. I would buy the pico puls if I wanted to do more alu or stainless. Both machines are great, but pulse really does help with those metals. It would come down to your own personal needs. I actually have a pico standard running on an automation machine that’s probably 15 years old. It’s never ever let the customer down. That speaks volumes. Hope that helps? Regards. Barry.

[@zorel1]

What is cost of machine in USA

[@TaimoTiitus]

2000 dollars

[@austriasalzburgsalzkammerg9619]

wow very nice video

[@tomthompson7400]

Semi being semiconductor i'm guessing ... I like old things that were built properly .. i've an edwards folder that is twice my age and will still be folding as well as it did the day it left the factory ... long long after i'm packed away and planted .. in fact .. I might fold my self a coffin lol

[@MSWELDING]

Ewm the way forward. Give us a call if you like, I will happily talk through options with you. Merry Christmas

[@tomthompson7400]

many thanks , i may just do that. happy new year to all your end too.

[@ismailssengineering3711]

Please price now

[@niculaandrei592]

Hy can you make a video when you weld in mig mode an 8-10 mm steel plate.thanks

[@jonstefos3332]

It's a secret trade man I wouldn't even know if I teach my firstborn kid how to even mig weld let alone any weld, Unless he or she proves worthy. it wouldn't matter the 2% of the public that knows what a weld is only understands appearance not any other molecular aspects.go ahead show off. Don't forget and medieval times if you were a blacksmith you'd go in one door with rocks and you'd walk out the other door with weapons and steel You were considered a wizard. The king would bow to the blacksmith have fun tipping over stack of Dimes which by the way shows me that you're an inferior welder if we're speaking about medium inert gas welding

[@jonstefos3332]

Notice how I can't punctuate or care to Endor re-read what I just wrote that's because I don't need to be good at that kind of thing I'm a metal manipulator you going to be chasing after my killdozer when everybody else is chasing have to you to be eaten

[@jonstefos3332]

I don't hate the public I just hate stupid questions for any serious people out there are interested in this business or would like something made let me know 845-820-4392 24/7 availability

[@IsaacHernandez-pp7xc]

AD DC?

[@tomthompson7400]

dc only

[@tomthompson7400]

if you could only have one portable welder , would it me ewm or foronius , ...

[@eliot77shunco]

Hello Thanks , Can you weld aluminum with that mig gun?

[@engjds]

I don't think ewm machines are designed to be portable, Fronius definately are, particulary the transpocket stick machines, they are very tough and rainproof, and easy to carry, the TS2200 is heavy when you have a large spool on there, I would not like to carry it long distances, but so is every other MIG machine.

[@engjds]

@@eliot77shunco Yes, and it does it very well.

[@jorgepaolucci3163]

hello, in tig mode solder aluminum?

[@sebasvertical]

nope, need to be AC/DC machine

[@mandylad]

what is the tig like on it?is there a gas valve on the torch or does the gas come on when you press the trigger??

[@martinandersson5278]

Martin mc gee there is actually two gas ports on the machine and yes gas it’s controlled by the machine