MSD338STV5.0 universal android kit installation part -1

firmware link . drive.google.c...

[@user-ep2gb8ii9e]

Thanks for firmware archive and this video! Very helpful!

[@vipin6297]

Informative video. Good.

[@kitecattestecke2303]

This with android 5.0+ would be godlike, Android 7.0+ and I am in heaven even for higher price it would be so nice

[@baolengoc5412]

Hi. I have a 14 "panel with connector edp 30pin, the panel voltage is 3.3v. But on the board does not support 3.3v, what should I do? Thanks

[@Electricworld-1]

Hello please can I ask you a question, I want to use this for a laptop with a 3.3v led backlight, I have noticed that this board only supplies a 5 volt and a 12 volts supply and it dos not have a 3.3v, can I use a Buck converter to reduce the voltage to 3.3 from either 5 volts or 12 volts supply on the bord????

[@MEDYK1961]

I am looking for software for the GZGT_MSD338-V5.0_DTMB_512M_4G 1600x900 model Please help me. Firmware is model 1G not suport.

[@win737]

Is it possible to apply LOGO at power-on boot?

[@cesarpacheco8858]

Hi very good video, I have a problem I had to reload the firmware from the usb since the google play store did not work, when loading the firmware I have no image on the panel. I only have the red led, when I put the pendrive back, I connect the power, press the power button and the LED does not blink, it only remains in solid blue. Any solution?

[@amanmittal4232]

I read about the model number given which is MSD338V5.0 it says it has a double core processor but some boards with model number MSD358V5.0 says 4 core, means it has a 4 core processor?? Please help.

[@amirmohammad7536]

Is it compatible with my SANKEY model CVTE_MSD338_512M? IS WISDOM SHARE please help me

[@dje5300]

How to change logo this board

[@ayazraoaliqadre4970]

Thenks birodar software link thanks

[@simplyLubna]

need 1920x1080 sony 55 inch LTY550HJ02 fullHD.please help

[@UnpluggedAnalog]

Hey my lcd panel LP156WH2 TL E1 this bord work on this panel

[@UnpluggedAnalog]

And how to connect 5v to 3.3v

[@haohaodk46]

Hi.This main only supported 5v & 12v supply for lcd panel. For 3.3v lcd panle , Can It work ?

[@UnpluggedAnalog]

Please try 5v I'm also use

[@harimderkour4289]

How to check resolution of the tv bro?

[@urreapa]

as I enter the option to change the firmware of this controller?

[@taimurkhan1366]

sir can we install this frimware into android stb zte stb b760D ??

[@pranavparab5445]

which screen is you are using pls reply

[@brotherselectronics4358]

HELLO SIR I NEED SOFTWARE TP.MS338.PB818 ENGLISH LANGUAGE IF U HAVE PLEASE TELL ME

[@banglacrazymedia6667]

How to this circuit charge...?? 😕

[@mayurahire1373]

Bhai, merepass tp.hv320.atm20.pb819 mainboard he.. logo ki file pen drive me success dikha rha but. Export nhi ho rha.. plz help how to change logo for this board

[@baijupettikattil2048]

+Mayur Ahire download logo .Save to pendrive. Switch on tv. Conect pendrive on usb port .oppen media. Select image/picture.now logo will display in ur tv screen.now press play/poss butten on ur remote and press move right and select capture and press enter , logo will save to ur tv .

[@mgunasekarangm4322]

HELLO SIR MY TV MODEL SONY KDL43W800C CONVERT TO CHINA KIT ???

[@baijupettikattil2048]

Yes

[@baijupettikattil2048]

Yes

[@mgunasekarangm4322]

HOW TELL ME FRIEND

[@kripaltube]

Tp.hv320.pb801 bin link pleas sir

[@igorkondratenko6874]

Please send password vs.s358a3.2 for 1920x1080.

[@anascaska7208]

Sir Please share your location

[@lqv77]

Firmware for 1440x900 and 1920x1080 ony ???

[@baijupettikattil2048]

+Kỹ Thuật Phần Cứng. firmware link is in description.

[@lqv77]

Thank for share

[@ngahseong2436]

Hi sir,if tv panel,do you need the t-con board or to where?pls advice with tks. How to connect the back light,your video didn't show

[@baijupettikattil2048]

U just Goole with the part number of ur panel.u will get paneldatta .

[@ngahseong2436]

I already got the panel LC39LE155M @1929x1080 .And my board MSD338STV 5.0 come without backlight inverter so I have to use back the original ps. Now I don't know how to connect the 32pin data to the t-con?🤔 Can help,thanks in advance😉

[@charan888]

How to know if board is 512mb or 1GB

[@lqv77]

Install App CPU-Z pls

[@jurkv]

I thought mine was 1 Gb, but when I uploaded firmware, it got stuck on the splashscreen. Then I tried to upload firmware for 512 Mb, then it started normally. Thus I found out that I got 512 Mb version, and Chinese sellers on Aliexpress are not honest.

[@cityhomespropertydealers8945]

what is the service mode number ?

[@baijupettikattil2048]

input 2580

[@omshivtiwari]

How to buy this board? Price?

[@UnpluggedAnalog]

Board price is Rs 2100 //512 MB & 2300 for 1gb

[@Instagram_reelsnikhil]

buy my software was error please help me immediately reply

[@baijupettikattil2048]

firmware link is in description . You can download it.

[@kripaltube]

Tp.hv320.pb801 bin 1366×768? Bin sir?

[@mdsameersananoor2192]

358v.6.0