[MSFS] The Ultimate Settings for Microsoft Flight Simulator in VR | Meta Quest 3 RTX 4080S

[@gracebyseven]

Thank you. I appreciate you sharing these settings. You have a very calming and relaxing way of presenting the information. 😊

[@crisk73]

Thank you sir! I wish my English was better 😊

[@hervefischbach2784]

Hello Thank you very much for your vidéo and your help. Your setting match perfectly with my config and it s super cool….have a nice fly and thanx a lot Gary

[@manuelazzobz]

Grazie mille @crisk73 davvero molto utile e ben fatto! Sicuramente un video da tenere tra i preferiti ;)

[@crisk73]

Grazie troppo gentile.

[@Mikey43219]

Thank you!

[@fsprimo]

DLSS better than TAA? it can be better in performance, you're right! but its almost impossible to read anything that moves in the digital displays. (altitude, airspeed)

[@crisk73]

@@fsprimo TAA still has some aliasing that DLSS doesn't have. Try the Ultra Quality DLSS and you'll be able to read displays just fine.

[@Pe11ePD]

I use DLSS in MSFS exclusively, it even gives me better image over TAA, as TAA does this awful ghosting on moving objects. But you must use DLSS swapper, to attach latest DLSS version to MSFS. I use some nvidia inspector tweak too, but I can't tell those are doing something valuable or only cause stutters.

[@b6s4shelter]

If you have Nvidia rtx, try DLAA. It uses tensor core to do better TAA, no up sampling of dlss.

[@Pe11ePD]

@@b6s4shelter Tried DLAA, got same FPS as TAA. I use DLSS mostly to gain some performance in VR mode, in other words to see less GPU usage

[@betabloccante]

ciao, ti ringrazio delle preziosi informazioni, mi chiedevo il perchè non hai impostato il codec AV1 per quest 3 su vd. Alla prossima ;)

[@crisk73]

Dicono sia più pesante quindi ho lasciato quello di default. Se dici che è migliore lo proverò.

[@betabloccante]

​@@crisk73Con questo codec gira bene, ho una 4080 liscia ed in più ho lasciato il traffico generato da IA , valori bassi ma almeno il mondo sembra vivo😅. Potresti dirmi come hai impostato il tweaker , che valori hai inserito precisamente, un mini tutorial solo per quella app che sembra un po' rognosa da configurare. Grazie

[@crisk73]

@betabloccante se intendi il DLSS tweaker, l'unico numero che ho aggiunto è il fattore 0.8 in corrispondenza dell'opzione ultra quality. Comunque sì potrei fare un mini tutorial anche su questo. Grazie!

[@betabloccante]

@@crisk73 ti ho mandato richiesta di amicizia su discord se per te sta bene possiamo scriverci li ;)

[@crisk73]

ok accettata, scusa prima non avevo visto il messaggio e l'avevo rifiutata perché pensavo fosse spam.

[@b6s4shelter]

So i run 4090 and 5800X3D and run DLAA, no ssw, 120hz and set my sim to 40fps. No motion reproduction, but just 3x 40 reprojection and it's butter.

[@crisk73]

@@b6s4shelter how do you set the sim at 40 fps and 3x40 reprojection?

[@b6s4shelter]

@@crisk73 I set up mbucchia toolkit fps counter and get basic VR settings to 40fps on 80-90% of the flying in do. Sometimes higher, sometimes lower but on avg 40fps. The HMD does a reprojection to fit 80-90-120hz by itself. What I don't get is ssw wobbles on the horizon. Also ssw takes processing power away from the goggles, son without ssw and natural reprojection at 1/2 or 1/3 of the hz, you get no tearing and it's butter smooth. I choose 120hz because it can deal fast with the slight fps changes.

[@zumorc]

@@b6s4shelter Can you please share your exact settings?, I am trying to optimize my settings with a RTX4090 and 5800x3D for the Quest3 to get to that butter part, too. That would be very kind.

[@b6s4shelter]

@@zumorc there's so much to say. I run mbucchia with fixed foveated rendering medium high quality setting, render scale in bucchia toolkit to 4500 or 5000x depending on type of flying, sim is DLAA, ultra tlod 250 OLOD 150, you can turn down some effects but what helps a lot is high textures x16 and find about 40fps with bucchia fps counter, set virtual desktop on godlike, av1 codec, 120hz. I have a 6e wifi so I can max the bandwidth in VD. Once your around the 40fps, the goggles with triple that, by displaying the same image 3 times. Old school reprojection, but I don't use SSW in VD, due to wobbles. Never enabled.

[@maik849]

​@@b6s4shelter Wo stellen Sie die 40 FPS in der Sim ? Das geht doch gar nicht? Oculus Debug Tool oder ein anderes zum begrenzen? Ich verstehe das nicht. Habe selber eine 4090 und 13900.

[@adilawadilaw8248]

i have rtx 4070 ti oc can i put godlike ? also Sharpening i have 100 % i have to put it on 75 % like u? Thx!

[@crisk73]

@@adilawadilaw8248 with a 4070ti you could try to put godlike and see how it goes. For sure Ultra will work well. Set sharpening to your liking, I have mine on the default 75% and I'm happy with it.

[@LoGoBDA]

Where do I find this "Virtual Desktop"? its not on any of the app stores (Microsoft, Meta, Steam)

[@crisk73]

@@LoGoBDA it's in the Meta Store.

[@LoGoBDA]

@@crisk73 I just checked - its not there (US Meta store) - Found it, its not in the Meta VR store!

[@kylekyle2445]

@@LoGoBDA But it is... google 'Virtual Desktop Meta' and literally the 1st result is the meta store page for it.

[@adilawadilaw8248]

Hy , do u use DX12 or Dx11 in VR?

[@crisk73]

DX11 because it is less VRAM intensive.

[@garyopt]

How do you record game footage like that?

[@crisk73]

Hi I'm using OBS Studio and a free plugin to capture OpenXR into OBS github.com/Jabbah/OpenXR-Layer-OBSMirror

[@garyopt]

@@crisk73 oh..I see, I am using OBS as well, and I believe i do have OpenXR as well.. but sheez this is so complicated...i resorted to resize and crop....

[@crisk73]

@@garyopt if you need them I can give you the resize&crop numbers for each high/ultra/godmode settings