MSI MAG 274QRF QD E2 Best Settings

[@PCMonitors]

➡ Affiliate link: geni.us/lUIKt7 As an Amazon Associate and Newegg Affiliate I earn from qualifying purchases made using the "Affiliate link" above. Best Settings (SDR): 0:00 Best Settings (HDR): 5:09 Low Blue Light: 06:23 Night Vision: 7:05

[@Mendil-p7k]

thanks for the review. didnt know what to configure so this helped me out.

[@shuvamsky]

Oh my god, after using your icc profile sRGB one specifically +user mode+blue value to 43+contrast 70+brightness 50 my monitor looks way natural colors and contrasty.i was trying different color temp but some make more reddish,some more bluish etc.Thank you so much,I was playing since last 2 days and wasn't satisfied .i wonder why default sRGB mode makes contrast go away😂Do you have any more tricks under your sleeve?

[@movietime7112]

where icc profile?

[@NikonD-cy2km]

Hello, can you save the settings in this monitor to several profiles so you dont need to play in the settings every time for diffrent types of games?

[@zuckey4668]

The bleeding of the monitor is terrific

[@tryfergoodra552]

backlight bleeding? do you have it? its that bad?

[@Graxu132]

@@tryfergoodra552 It's really not that bad on mine. When the screen is fully black, only one spot has noticeable bleed which I would guess is caused by overtightened screw inside the monitor. It doesn't bother me even though my previous monitor which is a TV (LG 55Nano916NA) has Full Array LED HDR and there was no light bleed. I do have a dead pixel in the bottom left corner, about 3.5cm and 0.5cm away from the left and bottom border. I'm mad af that I have it but it doesn't really bother me while watching or gaming.

[@100subsandilleatanonion7]

You know that the word terrific means good right

[@maxdamagusbroski]

​@@tryfergoodra552very bad, I've had 2

[@vladsta3833]

Thank you

[@alexb5dh]

Whenever I select any preset under Professional -> Pro Mode, text becomes horribly blurry. Not sure how it's supposed to be used.

[@PCMonitors]

That's weird and isn't supposed to happen. Check 'Image Enhancement' isn't on. And also check the 'Sharpness' setting.

[@nvidioso6571]

Thank you for your effort. I hate oversaturation but I also don't like washed out looks, do you think the native sRGB mode is good enough? Because I will use it on gaming consoles also and I can't make any calibration there (unless it's possible to save a hardware one) but the monitor I have is incredibly undersatureted and on the cold side on the sRGB mode, except the color red which is overstureted, the colors just aren't deep as they should and it looks terrible. I just want accurate colors man

[@PCMonitors]

The sRGB mode on this one should be relatively good as explored in the review (mileage may vary as it depends on the unit).

[@nvidioso6571]

Yes i saw it, but the thing that worried me was the low gamma, wich can't be adjusted in the monitor, and I don't know how much washed out or deep the colors are

[@Butterwichtel]

Could you use the OSD to adjust User mode so that it matches sRGB as close as possible? Because the dedicated sRGB mode doesn't have 100% coverage, as you've mentioned.

[@PCMonitors]

No, the only way to clamp the gamut effectively in the OSD is to use the 'sRGB' setting. Or you could use alternative sRGB emulation - pcmonitors.info/articles/taming-the-wide-gamut-using-srgb-emulation/.

[@eduardosessa7314]

Le luci dietro al monitor come si accendono?

[@elcino6561]

Per ps5?

[@NFawc]

What have folks done with their brightness, contrast and most importantly sharpness settings out of interest? Sharpness seems an interesting one, as it basically bevels contrast which picks out details but can compromise the image. I sort of like having it on a tiny bit?

[@PCMonitors]

The neutral (default) sharpness is technically "optimal" (most accurate representation of the image) at the native resolution, subjective preferences could dictate a different choice there. Brightness is down to personal preferences and lighting conditions. Contrast should be left at the default setting which is optimal and properly maintains shade distinction at both the high and low ends.

[@NFawc]

@@PCMonitors What is the defailt value for contrast? Once you've changed it - as I have - there's no way to determine the default setting? The colour seems far FAR more vivid that my previous Asus PB278QV (IPS). Sure I'll get used to it. Another thing of note is my NVidia 4070 isn't detect GSync is available (so not offering it to me in NVidia Control Panel) - I'm connected through HDMI through an ATEN CS1822 KVM (which is suppose to be Freesync compatible). Yes, I've enabled it on the MSI monitor. I'll try a direct HDMI next. But rvrn eithough GSync playing games is clearly MUCH smoother than my previous 75hz Asus PB278 as it stands!

[@PCMonitors]

@NFawc You can perform a factory reset in the OSD if you can't remember default values. You need to use DP for 'G-SYNC Compatible', per the review. This isn't an HDMI 2.1 monitor.

[@NFawc]

Should surely tell u what the default is? I think it was 70??? I thought fastsync was hdmi 2 compatible. Doh...

[@PCMonitors]

@@NFawc I think it is too (and yeah, would be good if it clearly indicated the default). You could also check another preset with the default contrast (like 'Eco') and see.

[@SendMeLocationBrother]

Would you recommend this monitor for a ps5?

[@PCMonitors]

Yes (for gaming on any platform) - pcmonitors.info/articles/best-gaming-monitors/.

[@elcino6561]

Ciao!!Questo settaggio lo consigli anche per ps5??gioco solo a Cod e Warzone🙏🏻

[@Heracl0s]

I really don't understand, i have the same monitor and i felt like the colors temperature was too high and i lowered the red in RGB settings. When i tried the same settings as you (R-50 G-50 B-43) everything looked yellow and the white was not white at all. All the colors in nvidia control pannel are set to default, i don't get why my wolors are so warm... if anyone knows why i'd like to read it

[@PCMonitors]

And this is why I said at the start of the video that individual units and preferences differ. You may have also been used to a monitor with a spectrally very different backlight or with a high white point (possibly both), which may look 'cool' by comparison even at the same white point. But again, don't just copy these settings and expect perfection - they're only appropriate for my unit and testing environment.

[@Juras188]

Hey me too at R-50 G-50 B-43 , B-43 si to much yellow. i need all at 50 . And just balanced Bright and Contrast Just now i trying Bright at 45 and contr at 65

[@Mikaaaaayswan]

Not sure if I want to turn on the Adaptive-Sync. I'm too dumb to understand when trying to research on my own

[@PCMonitors]

You can simply try it on (for VRR / G-SYNC / FreeSync) or off and see which you prefer. If you don't notice a difference it doesn't matter, you're note sensitive to the issues it aims to correct.

[@paolocinalli382]

why it doesn't work with mac? is it due to OS or this monitor doesn't work with mac? for me it's a big problem! can you help me please?

[@jassy4027]

How do I select night vision its greyed out

[@PCMonitors]

Are you running the monitor in SDR or HDR?

[@jassy4027]

@ hdr mate

[@PCMonitors]

That's the issue. The setting is only available under SDR (alongside quite a few other settings).

[@npolite22]

I have MP243XP and notice the color is way over saturated. Any way to keep the brightness (currently 70) and reduce the over-saturation?

[@pewpewnii]

how do i change the RGB lightning behind the monitor

[@Butterwichtel]

Either through the MSI Gaming Intelligence profile or in the OSD under Settings -> RGB LED. The OSD only allows you to turn it off or on though.

[@sinaabdollahiyeganeh7961]

How about contrast level ? The preference number wasn't mentioned!

[@PCMonitors]

Because it was left at default!

[@TheAGENT1990]

@@PCMonitors i would also like to know the default number after messing with my own settings from some months ago

[@PCMonitors]

@TheAGENT1990 Default is as shown in the video.

[@TheAGENT1990]

sadly it was indeed not show in the video above, wish you would've just told us instead :(

[@PCMonitors]

@TheAGENT1990 Ah yes, because of how MSI laid things out you can't see it in the video. You can perform a factory reset via the OSD if you can't remember default values. Or switch to a preset you haven't changed the contrast for which is set up with the same contrast value as 'User', such as 'Eco' or 'Graphics' and there's your answer.

[@Entofala]

best settings for ps5 pro? i have very vivid blue and red

[@PCMonitors]

If you want to tone things down then you can use the suggestions in the video to do so - especially trying the colour space emulating "Pro Modes".

[@scottysvensson]

I have got the same monitor and old one(non E2) just bought E2 version yesterday when i use fastest refresh old and new monitor getting ghosting on youtube webpage when i turn back fast no problem i dont get it i think something wrong with YT webpage 🙄 and there is no firmware update for E2 ?

[@maxdamagusbroski]

Hah 24 is what I ended up setting my brightness to too.

[@Jkz-eb3jo]

is the fastest or fast mode better for fps which one is better

[@PCMonitors]

This video makes my preference for 'Fast' clear - and the review explores this in more detail.

[@Heracl0s]

for almost every monitor "fastest" mod is really bad, you can do the UFO test to try it by yourself, just type "UFO test" on internet

[@davidcarr3636]

I have an xbox x connected which says the monitor supports hdr but on the monitor it says HDR OFF - how do i enable this as ON please?

[@PCMonitors]

@@davidcarr3636 You have to enable it on your Xbox, it's then handle automatically by the monitor.

[@davidcarr3636]

@@PCMonitors thank you i was being a bit stupid, didn’t realise it automatically kicked in once running a HDR game rather than checking when being on the consoles Home screen. Thank you

[@satyadsp3906]

can you do a backlight bleed test and post it , i just got the monitor and seems like a lot of backlight bleeding , please can you do this cause i want to understand should i keep it or not

[@PCMonitors]

That varies between individual units and is not really something that is useful to assess in isolation, which is why it isn't done in our reviews. Unless there is obvious backlight bleed or clouding which is clear in dark scenes in the video and is bringing out the 'IPS glow' more strongly in certain regions of the screen. This and 'IPS glow' more broadly is assessed in our reviews. My unit didn't have any particular issues of note beyond what I'd typically expect on this sort of monitor - kzbin.info/www/bejne/bJy9n5SIrL6mnK8si=uP1aEKEewm-PlW69&t=1054

[@matisms]

which one do you recommend between this one and the ASUS rog strix xg27acs? for multiplayer and ocasionally single player gaming and reading. im currently using the oldie ASUS VG248QG and i love it but its developing some seriuos vertical pixel lines on the sides.

[@PCMonitors]

@@matisms Both models will serve you well, but my own recommendation is clear - pcmonitors.info/articles/best-gaming-monitors/.

[@Dcully]

I have a MSI G272QPF , will these settings work?

[@PCMonitors]

@@Dcully Worth giving them a try, but feel free to make other adjustments if you don't like how they look.

[@shuvamsky]

do u have any idea what's wrong with msi gaming intelligence software with this monitor ? i manually installed monitor drivers too but it kept saying "please make sure usb type b is connected in order to use the app".

[@PCMonitors]

I had the same issue, which is why I couldn't share a "Best Settings" file like I usually do.

[@shuvamsky]

@@PCMonitors yeah, i reached out their customer service and they have no idea what was i talking about lol . i ended call out of frustration after 5 minutes.

[@Butterwichtel]

Do you have the monitor plugged in with both Display Port and the included USB cable?

[@PCMonitors]

I did on my unit and the software didn't work. Connected via DP and USB Type-B (upstream) for the software and it failed to detect the monitor. I tried multiple USB ports, restarted the system and I've used the software on this system with other MSI models without issue. So not sure why this one wasn't playing nicely.

[@davewallace5766]

Just got tbis monitor, and im trying to plug speakers in and yet no sound is coming from them, i bought the pebble v3 any advice?

[@mcfly855]

Pls select the monitor as output in windows settings. It will either be set on default or disabled.

[@Alxrimm]

I got this monitor last week. The power button is not working. Its like stuck. I cant even press it. Can u help pls???

[@PCMonitors]

You hold the joystick in (directly, not in any other direction) for a few seconds to turn it off. If that doesn't work, contact MSI as your joystick may be faulty.

[@Alxrimm]

@@PCMonitors you got me wrong. The joystick works fine. I mean the power button underneath. With the led

[@PCMonitors]

@@Alxrimm I think you're confused. The monitor doesn't have a dedicated power button. The only button it has is the joystick (a.k.a 'Navi Key') which operates as a power button in the way I described.

[@Alxrimm]

@@PCMonitors I got the MSI MAG 274QRFDE QD E2 Gaming Monitor. Isnt that the one in your video?

[@Alxrimm]

@@PCMonitors how do i turn my monitor on/off? Do i have to hold the button

[@hamoonfathi1576]

is the overall performance of this monitor as good as the AOC Q27G3XMN?

[@PCMonitors]

Completely different product with different strengths. I'd recommend watching both reviews and getting a feel for the differences, with this being much stronger in terms of colour performance and stronger for responsiveness, but significantly weaker when it comes to contrast and HDR capability.

[@hamoonfathi1576]

​@@PCMonitors do you personally think the trade off is worth it?

[@PCMonitors]

It's an apples to oranges comparison, it depends on YOUR personal preferences.

[@hamoonfathi1576]

​@@PCMonitors i understand, i ask because you have both reviewed and seen them in action

[@atfnik5348]

Hello. Did you use any ICC files or Windows default settings?

[@PCMonitors]

This is covered in the review - kzbin.info/www/bejne/bJy9n5SIrL6mnK8si=w_vD9oJbH3s718lD&t=701. :)

[@rafaelmonteiro7008]

what are the best settings for a fps game like overwatch, valorant, counter strike? i have a and GPU as well not sure if works with freesync

[@PCMonitors]

The settings suggested in the video are not application-specific. Outside of that and as noted, you adjust according to your own preferences. For example you may want to use the 'Nightvision' setting explored in the video to enhance visibility.

[@borisboskov32]

Thx for the video , but "Where are the best settings?"

[@PCMonitors]

They're shown in the video and then summarised, for both SDR and HDR. The video is only ~8 minutes long (~6 minutes excluding the extra settings covered at the end) and time stamped so you should really be able to extract the necessary information. If not you should refer to the calibration section of the review, which shows the settings used - kzbin.info/www/bejne/bJy9n5SIrL6mnK8si=-JjUVuulc5nGZYq0&t=547.

[@Iopipimps]

Does it have backlight strobing sync?

[@PCMonitors]

This will be covered in the review (spoiler: no).

[@guy5282]

Hello, I wanted to ask if this monitor has an MBR feature. In your detailed review you didn't mention it and according to the internet it does have MBR but I couldn't find a showcase. I wanted to compare its MBR to that of the "AOC Q24G2A/BK" which you have reviewed in the past. Do you perhaps know where I could find it or do you know from memory if either is better? Thank you for your thorough work

[@PCMonitors]

It was covered in the review. kzbin.info/www/bejne/bJy9n5SIrL6mnK8si=LCZvOBGMfYUCJMIh&t=2852

[@guy5282]

@@PCMonitors My bad, I thought it's always covered in the general responsiveness section. Thank you!

[@PCMonitors]

@@guy5282 Understandable - it should really have its own chapter title/section to make it clearer.