Thanks a lot for the video! helped me so much during the QS installation. Kudos!
@jipper95 ай бұрын
Yo dude I literally just finished putting the QS on and it works. Appreciate the video dude made it a ton easier (I am crap at reading instructions) now off to (as much as we can cause the Belgian roads are terrible sometimes) enjoy my bike.
@sadyoshixd5 ай бұрын
@@jipper9 haha my pleasure, as a Belgian myself I know what you mean.
@youssefaferrhal15638 күн бұрын
hello there , i do have an 2021 mt 07 , and when i shearched the bike i really found the quickshifter plug was there
@robertofernandes34932 ай бұрын
hello, I bought my shifter but when I connected it to the connector I did not have QS on the meter even when doing up shift hold
@sadyoshixd2 ай бұрын
@@robertofernandes3493 yes i had the same problem. I just had to try it for like 10 minutes for it to eventually come up and work, that’s why there was a cut at the end of the video. If it is something else i will sadly not be of any help.
@robertofernandes34932 ай бұрын
@ yes you do it when it’s on neutral and after you hold up when you put contact im doing that and don’t works 🥲🥲
@jipper95 ай бұрын
are there torque specs available for the bolt for the seat and the tank cover? cant find them in the owners manual.
@sadyoshixd5 ай бұрын
@@jipper9 I don’t think so, I just tightened it on feeling.
@HughJanus98710 ай бұрын
I just did this on my 24 mt07. Isn’t working for. I bought the Yamaha quick shifter and installed it today. I held the shifter up and turned the key. Got the QS icon. I took the bike for a ride. Bike runs fine in first. Get on the gas and click into second. Bike loses all power and bogs down badly. Pull in clutch and bike idles really low almost stalling. Turn off bike and put it in neutral. Start up and it runs fine but does the same thing when I start riding. I unplugged the quick shifter and the bike runs perfectly fine. Any ideas?
@sadyoshixd10 ай бұрын
This might be a production issue, but I’m not certain about that. Best thing to do is to probably get it looked at by a professional.
@italianstallion70110 ай бұрын
Hey mate how did you programme it to show up on the dashboard?
@sadyoshixd10 ай бұрын
You can see on the 4th picture at 0:03, you have to be in neutral, hold the upshift to second gear, turn on the bike (not engine just turn the key) and hold the upshift for 10 seconds. I had to try about 5 to 10 times for it to actually come up on my screen. i tried moving the bike slightly forward for it to actually go into gear and stuff. So be patient it will eventually come 😅
@italianstallion70110 ай бұрын
@@sadyoshixd thanks! Do you engage 2nd gear fully and keep it held or do you press slightly just before you’d otherwise be in 2nd??
@sadyoshixd10 ай бұрын
@@italianstallion701I think I tried to fully engage, but like I said, I had to try multiple times, so I could be wrong.
@JamesExcell-InterJex10 ай бұрын
Is this the same connector of the USB charger?!
@sadyoshixd10 ай бұрын
No, this of a specific plug for the quick shifter.
@kellyd19106 ай бұрын
This de serves more views. All the other videos on this isn't good. Well done!
@nebarrera5 ай бұрын
I also installed it on my '23 but unless you give it the beans, the shift is not smooth at all. I've seen videos with after market shifters and they are butter smooth, maybe a nice tune will do the trick...
@sadyoshixd5 ай бұрын
true, on low speed the quick shifter isn't that great, but if at around 3-4k rpm while giving a little gas, it is very good. I'll upload a video showing a little how I ride with it.
@jjp5346 Жыл бұрын
thx i have 2022 mt07. same connector location?
@jjp5346 Жыл бұрын
oh...I checked
@sadyoshixd Жыл бұрын
No, 2022 models don’t have this connector. Only from 2023 models and onwards.
@jjp5346 Жыл бұрын
@@sadyoshixd thx!!!!
@italianstallion70110 ай бұрын
Hey mate how did you programme it to show up on the dashboard?
@ikemitch24984 ай бұрын
Think it would be the same on my 2020 mt07?
@sadyoshixd4 ай бұрын
@@ikemitch2498 no, I think the quickshifter plug is only from 2023 models and up