Much needed major engine upgrades for the mack and new injectors form

[@DirtPerfect]

Link to area diesel video kzbin.info/www/bejne/nnuumZ6YbJ2JhNUsi=nzTor6XnGbWgBdL1

[@randallparker8477]

Watching these two guys pickin and yackin at each other really shows just how long they have known each other and how strong their friendship is. What a team.

[@daniele.woodhead1218]

Seen the video it was amazing and very educational, If I ever need anything for my 05 F250 6.0 Turbo Diesel they would be the one's I will call definitely. Thanks for the link.

[@Cp3659]

What size bolt are you using as the nozzle puller?

[@tdkrei]

You know Mike, you have one of the few channels I will take the time to watch an 1 hour video on and stay interested. Thanks. Keep on smiling.

[@legrandebadger]

I'm sure Area Diesel loves the shout-out at around 1:04:02 when Mike says it's hard "to find anybody with less knowledge" 😂

[@jerrygoggins5663]

I noticed that also, had little chuckle when Mike didn’t correct himself!😅

[@wink9970]

camera nerves @@jerrygoggins5663

[@stashoski2675]

👍👍👍👍👍👍 good class on working a Mack injectors, engine brake

[@WhatTheTarnation.]

FACTORY!!!!! VERY NICELY DONE, SIR!

[@jilldunn1041]

brilliant work I the lines you did a fabulous job well done you and arron work well cheers Jill Australia 🇦🇺🐨

[@stephsmith6421]

Excellent NO LEAKS. Sounds much better 😊

[@mathewsmith2650]

if you do something like this again put grease in the flutes of the tap it helps capture the filings when cutting the threads

[@benchipley]

I’m going to have side with Aaron this time DP. Direction: forward - back(ward) Location: front - rear God bless y’all.

[@brianshanahan6196]

Thankyou for a decent session of DP! Cheers Yaall .

[@richardhedrick5601]

Very good explanation on the Jake brakes

[@claytonl.covell2634]

Love to hear that Bulldog growl!!!. Nice work guys. 😎👍

[@Vickie-Bligh]

Nice work. You can move dirt really well and you haven't lost any of your mechanic skills. This was a fun watch.

[@rhondasweeney7271]

Great job to Mike and Aaron! Thanks for sharing 👍 😊

[@josephzickert4051]

Aaron is it so wonderful that you are sooooo helpful.

[@Old-bold-pilot]

Excellent video and education on that engine. 👍👍👍👍👍👍👍👍

[@matthewturner3421]

Thanks for the hook up with UpState Brush Control. He's loving it. Keep working your magic. Maybe one day Arron when he grows UP he'll be as tall as you.

[@dansullivan2954]

Enjoyable, informative, and funny video. Well done.

[@jerryoxley9556]

Hi DP and AAron, great interesting vid guys! Those pipes still bring a smile to my face.when they start growling! Jerry..UK

[@eddieatkinsjr.8875]

MBTS's safety chat reminds me of the one I used to tell the guys when doing safety checks on the railroad got the same reaction. great channel!

[@bikerdad63]

Mike the boulder wall at the river campground is looking good.

[@DirtPerfect]

Thanks

[@dannyhutcheson9932]

Good job guys, the jake is going to be extremely beneficial for hauling all of the heavy equipment that you deal with, especially if you are moving in less than hot dry conditions. Thumbs up fellas.

[@Mr.Avuncular]

DP you guys dun good!👍👏👏👏👏👏

[@parrychapman7703]

Alright! The ole Buddha Puppy got some TLC. He's a good old truck. I'm sure many years are still left under his belt with your capable support. Enjoyed! Thanks again for sharing.

[@garymessina1609]

Great upgrade great job great video thanks Mike and Aron

[@tomoaktree4951]

Hi Mike, Awesome video! I get such a kick out of the joking between Yourself and Man Behind The Scenes" But on the opposite side, the content of the video, and your detailed explanations of the project that your working on! And of course a big shout out to Area Diesel!

[@fransinyard891]

Good morning sunshine! I love how you explain everything so simple for us to understand & MBTS just looks at you with a blank stare & says yea I got it! Lol! Great video! Much love from Henderson Ga

[@DirtPerfect]

Lol

[@almaylin464]

I worked with my dad for 8yrs working at a Mack dealer. I left before they were Volvo’s, but he always told me never want to work on a tough job on Friday cause if you get hurt or sore it screws up the weekend. He mostly did wrecks ( cab swaps) and he or I did most of the Boogie trees and Frame rail replacement which were always fun

[@stevenr8606]

👍🏼👏👏👏 people need to understand that STOPPING, when you NEED to stop, is more important than moving‼️ BTW, NO need to grind shorter the tap. They do make a 'bottoming' tap.

[@tomp538]

I love the sound of "jake brake" in the morning! So glad to see the jake supply hard lined...

[@tomthompson489]

Excellent job on bending tubing. Give you A plus Mike. Wade probably heard the Jake brakes at his house.

[@danielashford2430]

Nice video Mike,Thanks and peace to you and yours…

[@golfer963]

Thank you to the crew @ Area diesel

[@jcmathisiii6432]

I like to hear Jakes when you jam gears. Nice job DP 👍

[@michaelmullins1290]

Nice work. That certified Mack mechanic comes in handy sometimes. You and Aaron are comedy gold. Jate he wasn't there for the finish. He could've told us how he fixed it!

[@NotmeGK123]

Fall coming dark when watching your videos now dang it dark time saving coming to

[@craigmosier5333]

That old mack sounds good she's got a good bark. Jack's sounds good to

[@williammurfin6354]

Oh so were finally going to see the side tipper working. Sweet!

[@kevinkenyon7045]

Mike and Aaron great video,the way you explained everything was good! Thanks for sharing! Kevin

[@shirleyc7175]

I do think you secretly enjoy anything that breaks down so you can figure out how to fix it. 👏 👍. Good job

[@amossnowdaharleyman9179]

I've got compression brake on my Ram 3500 with the 6.7 Cummins. LOVE that feature. Saves the truck brakes like no get out.

[@daviddziegielewski653]

You guys looked like a couple of surgeons. Great job ! Long live Jake Brakes! Keep on Trucking!

[@keithsimpson1268]

Great job 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 19:17

[@heatherlane9270]

Area Diesel Service coming to the resue once again - skilled knowledge there. Mack sounds smooth - trust all goes well with it.

[@leol1682]

Love the video on the Mack engine fix .

[@lynnlutjen261]

Good job sounds like it's working, love the old Mack trucks drove them many hundreds of thousands miles over the road pulling long combination trailers. The engine break was a pain in the ass bringing loads off mountains. Looks like you have it worked out 👍👍

[@mischef18]

Well this sure made for great viewing guys and yes a big thanks to Area Diesel, great result too. Safe travels. Ken.

[@charlesroberts6965]

Awesome fabrication job fellas..glad she's working better than ever...would definitely call that a win.😁🇺🇸🔧🚜🛠️😇🚛

[@bobbykackley82]

You and mbts make work look fun thats not easy to do lol

[@bobbrinkerhoff3592]

It's good to know that I was hearing what I thought I was hearing ( a slight miss ) BTW , that was a countersink and not a counter bore that you were using there .

[@dennis2376]

Thank you and have a great day.

[@coinstipatedtexan83]

You've got clearance Clarence.

[@shisholy7828]

Great show, Thanks🥰👍

[@pinwizz69]

Boy O Boy Mike, you and Arron make a pretty good team when you're wrenchin' in the shop. The comedic banter really makes these shop episodes entertaining. I've always loved the sound of Semi's gearing up and Jake breaks kicking in. I onky drove long haul 7 months before my ex made me find a regular job which ended up being a mechanic/technician on Arcade and pinball games, jukeboxes and pool tables and other coin op equipment but I loved those 7 months on the road. G.I. bill paid for my community college truck driver course. G.I. OJT my amusement vending training. Now I wish I'd have gotten into operating excavation equipment. It's been a long strange trip but I'm now enjoying retirement watching KZbin channels. You mentioned a couple of them.

[@brucehuff5566]

What a nice job on the oil lines. Stay safe

[@Skoalman]

Great job, guys! Awesome video. Keep um coming!

[@patrickcolahan7499]

Many ways to skin a cat, I would have run a riser from the filter housing and installed the T above the manifold. Yes requires a new turbo line but so much easier to work with. Just me. Nice job, like the OIT and the hard line under the cover. Thanks for sharing.

[@leer-winnobbeefarms2131]

100% over my head, but a great and informative video. I have, use and drive diesels, but that's where it all ends. I love to learn and that's why I love this video! Thanks Mike & Aaron! Lee

[@joejohnson7097]

Like where you explain about the Jake brakes. Love the way you and Aaron joke with one another. Thanks for the video

[@robertlacour8338]

Think I understood the Jake break more than Aaron but I still love shop videos. I learn so much or understand so much more about you equipment. Loved it laugh a lot just what the doctor ordered

[@frankgaleno-sg6hm]

Aaron trying to push your button had me laughing. Mike good job on explaning the process. It is always a joy to watch.

[@tomwainwright7102]

Yet another video that has had my undivided attention, I really do enjoy your shop videos.👏👏👏👏👏👏

[@redbloodedamerican7130]

Great as always sir 👏 👍

[@haroldfoust]

Look out the boys are back in the shop September 12th local time 7:01 AM Tuesday👍NC

[@kevinmurray7135]

Most excellent video DP aka(Mike)always makes my day when you an Aaron are having fun with everything you do 👍😎🇺🇸NY

[@CMDSR]

I’ve seen Area Diesel Work on several different things. They do amazing work. I think you got the jakes working just fine now. Good job bud.

[@houndsmanone4563]

Nice work, Mike. That sure was a considerable amount of work to get those hoses connected and great work on fabricating the metal pressure tubes or whatever they're called. Jakes now operating superbly and injectors replaced. I'd say that was a very successful day. Full-watch. 👍🏽🤠 9/12/23

[@georgeenriquez612]

Your great work makes for a great video Mike but MBTS makes it hilarious lol The puppy dog sounds happier now for sure

[@gullreefclub]

The big green Puppy Dog gets some much deserved love and attentionq. I have to say from personal experience it really kinda sucks to drive a truck with weak/non functional Jakes especially if hauling any sort of a load.

[@ChrisWright7701]

Looks like an operation table with them covers.

[@henkweurding3339]

What a sound if you put the engine break on.... I hope your neighbors are into heavy machinery as well. It's great to be able to do those jobs yourself and it makes nice educational videos as well.

[@susanstaples-4761]

Now it needs tlc in cab ie bloody good clean

[@benrosenbaum2962]

Nice job on those oil lines. Looked factory. The puppy dog def has a great sounding bark.

[@StephenKlena]

Very impressive knowledge and information. Good Jo, Well done 👍

[@michaelhuhn90]

Shop Days are so much fun. Aaron really loves getting under your skin Mike , but it's all in good fun. Mmmmmmm something shiny..... can't wait to see what that is all about. Keep up the good work Mike.

[@yenerm114]

👌🏻🤘🏻🤘🏻 that retaining wall ya did I think it was last year looks 👌🏻👌🏻

[@susanstaples-4761]

You have made a good job of the DP hope it work fingers crossed 🤞 😊

[@glennspreeman1634]

A&M comedy team back in action! Have no idea how you get serious work done.

[@cyndikarp3368]

Excellent, you accomplished your goals. Sounds a lot better & Jake break works at low rpm.

[@beaucollins9555]

Love the sound of the jakes

[@tubeDude48]

Matt at Diesel Creek gets so tickled when he gets a Diesel engine to start!

[@paulprigge1209]

Yes his Excitement is precious! Such joy

[@garysparks2681]

Considering the state most of his are in when he gets them, I'd say a little 'happy dance' would be in order.

[@bobbydawson7706]

Good morning and thanks for brightening my day ❤

[@davidr6585]

+1 for the steel line over the rubber line.

[@jeremiahjohnson1237]

That “10 min of aggravation” was the funniest banter I have seen on KZbin in a while! Thanks for the laughs!

[@timtaulu9914]

Very interesting learning new things that i will not be able to use but I enjoy learning it It seems that the jake brake is more necessary because of heavier equipment . Ready to be taught more. 🤓winter time is coming more shop time😉

[@hanshaw1974]

Put grease on your tap and it catches the shavings.

[@davel2223]

Man behind the scene, you make a good sidewalk superintendent and equals the good humor man

[@rudyfisher7660]

After you do that, that modified one thread that you did. Modify for your break, make threader for your Jake break too. That way, you can throw it with a regular one and then use the modified 1 to finish it up a later on if you ever have to work on another 1.

[@terryrogers1025]

Mike, on that DeWalt light, I took mine and expo y glue earth mags on 2 sides and the back top of the light, it gives the option of sticking the light where you need it, just a thought sir. Nice job of running the oil lines, I like it sir, thanks for the tag along video.

[@jimposey8542]

Well that went well 😅 Eventually a robot will do that for you 😂😂😂😂

[@davidhosmer1424]

I would be concerned with robbing oil to the turbo charger. I guess Mack thought about that - NO WORRIES. Always great videos. Thanks

[@SK-og9xz]

I have a 2005 Granite that does the same thing and I would like to add a Jake also.

[@NiklasNorlen]

Spa day for the Mack👍

[@MySynthDungeon]

Great video .... coffees on! Cheers!;-)!!!! Lov team work ,,,rattles!! lol!!

[@Bediasman]

I really enjoy your repair videos, I learn much. It does look however that Mr. MBTS is going to fall asleep during your explanation of the break system. LOL, he makes your channel. Thank you both.

[@DirtPerfect]

Thanks

[@jordankiser1989]

Looks great mark !

[@paulprigge1209]

Thank you! Very good.

[@Denis-tu1pd]

Sounds alot better and minute bit of smoke. The exhaust sounded really deep. Awesome video and job .Denis from Santa Rosa CA

[@gussaba9004]

Aaron where is your Pink Stoll it comes handy on this job today

[@williamgreenwalt2464]

Thanks for the lesson on Mack Jakes I am a Cummins man by trade. Nice job