AutoCAD 3D House Modeling Tutorial Beginner (Basic)

[@kristianaliy6218]

I love this video... people need to understand that others learn just by watching someone do something not by having everything explained to them step by step...

[@ruffxm]

And others learn by doing, not watching....

[@estherobrien7840]

Before encountering the subtle *tap, tap* of the mouse, I had never imagined I could design a house in AutoCAD. But now, upon hearing these almost inaudible sounds, created by one who is truly a master of computer software manipulation, I am empowered to do the same--I *shall* design a house, in which *I* shall live. Gone are the days of endless wonder and aching, the result of my inability to inhabit my own, customized home. I am the first of a new breed of humans, who shall design their own fortresses! We shall prevail in populating this world! All because of a single AutoCAD tutorial, which has inundated my brain's emotional heart with an overflow of dopamine.

[@DasMixl]

+Blake O'Brien May the best of all lucks descend in your general direction!

[@midnightlilac4170]

+Blake O'Brien wtf

[@estherobrien7840]

derping derpette :Just let it happen.

[@estherobrien7840]

I am own all merchandise. You take what is want. It okay.

[@Twinkle1092]

Thanks for the video, this was my 1st time drawing in 3D and i understood everything u did without u having to speak a word. Thanks again! :)

[@MufasuCAD]

Twinkle1092 nice,, it is let your imaginary skill works

[@Twinkle1092]

It wasn't as easy but practice mades me finish faster...I'll try my best

[@mybuddy3119]

I like the tutorial. Don't know why people are complaining. Following the tutorial and looking up for references helped me understand AUTOCAD much much better.

[@modisofi8180]

I liked that 3D modeling Sir , but we prefer if you included i voice explaining steps plus muting the mouse clicking , I'm following your channel cause you are amazing

[@MufasuCAD]

Modi Sofi Sure,, i will improve the tutorial

[@modisofi8180]

Sir are you from hyderabad?

[@modisofi8180]

Mufasu CAD sir are you from hyderabad?

[@xhaseem1]

+Modi Sofi sir sir sir sir sir sir sir aha duh

[@MassimoHardcrew]

If you touch too much commands and have messed up the project go to windows -START- all programs - Autodesk - Autocad - Reset settings to default !!! This saved my life....Great tutorial :)

[@maiorion800]

nice ???

[@s0cr4m19]

I am professor of the Universidad del Valle de Mexico and I really like your video to my students beginners, thanks.

[@MufasuCAD]

+Marcos Antonio Cervantes Favila Thanks for watching,,, i hope its help your students

[@delianegrila1387]

He did a very good job imo. Explaining the basics step by step. English is not my first language and I have no experience in using DAWs

[@amandak5456]

Very Well Explained!!

[@unjust7156]

i know RIGHT?

[@hannahm.194]

With this tutorial, I am sure I can make a house in no time! And, I REALLY understand the greatly explained video tutorial. *note sarcasm* If there would be a narration or subtitles explaining every step then, that would be great. Anyways, I still love the work.

[@markpedrotuazon2921]

Yes very clear i hope we learn more about 3D Autocad

[@satyabhankumar9258]

😂

[@MsIronLion]

This is probably the most easy to understand and clear video on youtube on Autocad 3D, also accessible to everyone. thank-you very much!

[@EdwardKeyte]

good English language lesson. Thank you. I'll show with my viewers.

[@ytstudio8378]

broken it down makes it seem so user-friendly and easy to use. I can’t wait to start making soft! Thanks again!

[@DL_Sage3939]

there is something called explanation

[@oops1749]

The comnt section is very positive and downright encouraging! Love it!

[@doubledeckyomom]

Yours words speak volumes

[@petervolkert3551]

THANK YOU!!!! you actually guide your viewers through soft, unlike so videos that rush the whole tNice tutorialng or talk too fast.

[@Drake3498]

how is this a tutorial when you dont explain anything?

[@MufasuCAD]

Drake3498 for beginner,,, first you can try learning autocad here,,, kzbin.info/aero/PLjyiWW2QlmFyMTtSl_nrWXaIYf63oZok_

[@anthonysweeting9392]

I thought it was pretty comprehensive, just need to look at the text commands he enters.

[@tebikei]

Mufasu CAD I feel like there weren't much details given along with the tutorials, but thanks, I manage to get it done exactly the same by following each commands :)

[@ΕυάγγελοςΚρητικός-ν9τ]

I dont have speakers at work and still i managed to follow your instructions. thank you for the upload!

[@Scientificmethods]

Beginner??? - There's 0 advice, just a person starting to do it.

[@kunto3703]

Overseas channels are also obviously rich in science, thank you.

[@ECWnWWF]

thumbs up for the commentary

[@nhfaizal6]

Thanks man. I have been working in elv design for long there we don't use 3d.and I learn autocad 3 d b4 but I forget most of it and your tutorial help me refresh my 3d knowledge that I learn from institute.

[@CGDarius]

Good job, but tutorial would be better if you say something to teach. I am trying to create channel like yours with comments in video. Good luck.

[@MTHGTAMODSTUTORIALS]

Go ahead bro, what are you waiting for??

[@CGDarius]

Check my channel and you will see how much i have done.

[@MTHGTAMODSTUTORIALS]

I already did it bro, you have pretty cool tutorials. I noticed your channel name after putting that comment :)

[@CGDarius]

Okey thanks :]

[@yashwanthgowda1214]

awsome sir i see this video for cad exam preparation i want this super video from you sir simply suppppper sir thankkkk you once again

[@MufasuCAD]

+yashwanth gowda You r welcome and thanks for watching

[@kylecedricdagame9076]

Is the comment section filled with engineers? Because im only a grade 10 student curious abt how to design a house lol

[@Scientificmethods]

No, we are all being sarcastic, its a useless video

[@beaem8132]

Thanks! I've been searching how to get it and this is brilliant :D

[@Lebron_1]

Bad tutorial the 3D stuff doesn’t work and the second pair of windows won’t extrude and when I try to subtract them they don’t subtract into a nice perfect 3D window they just go back to 2D

[@aniclips275]

I just found how to get the windows subtracted. Do 'sub', click on the house layer, press enter, then select the 2 windows and press enter!

[@azerbaiagao-agao7849]

TNice tutorials is really well done Mike, thanks for putting the ti and energy into tNice tutorials.

[@stoopstoops]

I don’t like this. It’s too confusing

[@radektesar3036]

damn calling out right now. Hey, when you're passionate about sotNice tutorialng it makes you actually want to study it!

[@jkz2746]

the mouse needs to be changed, it's so slow to click and annoying

[@tropicoo8072]

Thanks for all of your tips! I've just been getting into producing myself for my artists and mannnnn. It's like science lmao. Thanks a ton!

[@EccentricMan]

this is freakin hard.

[@ambersfamily5396]

TNice tutorials was great! the way you explain tNice tutorialngs and repeating it really helps. thanks for the tutorial!

[@rhandycan1]

Tutorial but uou dont even speak what you are clicking. And you include in your subs as BASIC

[@tanat6952]

TNice tutorials was super helpful, dude! I got the tutorial version of soft soft just to get a taste, and after figuring it out I decided to purchase the

[@KC-qr4sc]

Really click, click... Sucks

[@memelovly86]

nice it took me 3 hours to complete it but it definitely worth it

[@s....a8880]

bol kar samjhaya kijiye bhai

[@azizazimov7745]

if i would do same thing i think it took for me at least 2 days. guy done it in 17 minutes. Bravo

[@MufasuCAD]

+Aziz Azimov You also can do it brother, keep learning

[@EtarehGainz]

Can you at least speak on what you're doing mate?

[@nyongambon2162]

You have no idea how grateful I am for tNice tutorials series

[@MattiasPett]

mine putsi

[@sebastianjoffrerico748]

Wow what an acNice tutorialevent! Best of luck for the rest of your future, I’m looking forward to being able to invest when I turn 21 in November!

[@nodirbekkilichov2210]

Can you speek or is your tongue cut off?

[@MufasuCAD]

sorry,, im not fluent to speak in english language,,, btw can u understand if i speak in anothers,,, in the tutorial i'm type commands, if you already mastering basic 2D commands, it will be easy for you to follow the tutorial.

[@johnjhon5285]

hahaha

[@debbiekalima4541]

practised this for my assignment and it went perfect thank you

[@deepakgamit6276]

without Audio its boring video

[@makdavian3567]

This is not entertainment, you idiotic fuck. This is really helpful.

[@nirav7441]

yes deepak, u have to visit www.sseacademy.com for complete learning.. for free for everyone

[@_SYDNA_]

Thanks. Loved how you picked up the reference height/depth by hovering(?) over a nearby reference point and then clicking back at your intended line destination. Im sure it wont work when I first try it and it will take some experimentation to get it right but it's still something to shoot for. Lots of 3d navigation techniques highlighted in this short video. Now it's up to me to make it work. Good intro to some approaches to 3d. Combining this with some of the push/pull techniques we see out there will be helpful. Heavy use of the command line on screen is instructive too.

[@cfarquitectos2435]

I basically know everytNice tutorialng there is to know about soft soft but I still watched tNice tutorials through just because of how good you explained

[@campingatthecinema5202]

when i typed in soft soft tutorial i did not expect it to be tNice tutorials good thank you so much aaaaaaa

[@plasma3211]

Thanks Mufasu for putting up this video. Your approach is very simplified and concise. Can you tell me what Units you are using?

[@anthonygopeesingh7645]

+robert morin yes please what units

[@kmho2000]

在2:53, 請問你是否用鍵盤short key 改變XYZ軸方向? 如何用鍵盤short key 改變XYZ軸方向?

[@bikashsharma21]

subcribed me plz.. modi note.. click below link.. kzbin.info/www/bejne/mXvFeXefbJKbnKs

[@geovanimt3182]

Very nice and well explained. Every tNice tutorialng is crystal clear and easily understandable.

[@annamartin4477]

aah, i just got into making soft rn and tNice tutorials is so helpful and your voice is so sootNice tutorialng btw! thanks for tNice tutorials tutorial

[@duleman14]

Thank u very much,all tutorials are good,and guys every step every comand u can see it if u look on his mouse !!! Good job and thank u very much again! :D

[@shaninad5926]

WatcNice tutorialng tNice tutorials video is literally my 1st step to my 22 goal.

[@manjunathmakari6493]

bro please tell the initial setting conditions of units and MV setup, and also the printing options

[@rxdrik1ng966]

Now tNice tutorials was truly an aweso video. I love your thorough style

[@thurmansteward3864]

These are excellent tutorial videos for practicing and build your objective blocks when designing or modeling. Like the different instructor and resources, that's a plus.

[@MufasuCAD]

thanks for watching us

[@aymanhamieh8934]

hiii can you help me??

[@kissmemore8388]

You can't vicariously experience sotNice tutorialng through another person, the sa way you need to try it for yourself before losing hope.

[@ajmags4679]

you can simply extrude surface not solid the joined lines you created without offsetting then add thickness to it by using thicken command.

[@Legitivity]

Hi, May I ask what you did during the subtract part in the beginning? I typed in "subtract" and selected both ext and int wall and pressed enter, but still shows filled when i switch to the shaded view Thanks

[@i5gum3s_4]

Great tips!! I'll def check out more of your videos. Just started writing and making soft. I feel soft softs will help get to the next

[@tsetsooooo]

AT 4:20 SEC when i subtract my windows disappear , why is that

[@hadicahyono4629]

cakep nee, saya berharap ini menjadi awal yg bagus, trimakasih tak hingga

[@diegosmurillo]

im stuck in minute 2:56. i cant make a rectangle inside the rectangle, just in the corners i dont know why...

[@MufasuCAD]

Draw an object on face,,, take a look this tutorial... Turn Off AutoCAD Auto Selecting Face

[@harneksamri361]

click on o snap & off the o snap key

[@ikrajahan3745]

you record with hardware outside of the program. Great tutorial btw it was very detailed but still just right for beginners.

[@mapsorg1998]

59.. and now after trying it out and watcNice tutorialng tNice tutorials series of tutorials .. now a soft soft Convert!!!!!! Man tNice tutorials software is stable on a

[@rebeccawong428]

This video is helpful. Just need to pause and take note of the command aliases used.

[@SuperSpamGuy]

3:00 +Mufasa CAD do you remember the demensions of the windows and door? im having trouble doing it like you did and im wondering if its because my deminsions are off.

[@MufasuCAD]

its free style dimensions

[@MrAansetyabudi]

termakasih banyak bang atas video tutorialnya,,, tapi saya mau tanya, di menit 10:29 pas mau bikin garis pline kog saya gak bisa nemu titik di ujung garis tegak yang 30 cm itu ya?

[@MufasuCAD]

Aan Setya Budi perhatikan ucsnya,,, terus untuk mempermudah bisa aktifkan semua snapnya,,, ketik ds (enter) > pilih tab snap dan aktifkan semuanya..

[@MrAansetyabudi]

Mufasu CAD hehehe tadi udah bisa saya akalin pake line biasa kog ketemu, trus saya join... tp kalo pake pline gk ketemu titiknya... makasih ya bang ^_^ dapet ilmu buanyak nih :D

[@izumi3224]

going to go make my first soft! My first soft!! Here I go! Wish luck.

[@pedroalcaraz9596]

It worked perfectly!!! Thank you so much

[@ctaylorm2829]

Thanks for the video. what modes do you have when you are using the "Pline" function for the roofing? I was good up until then and then my line just would not connect? Do you think you could make a video with talking, that way we can also know what you panels on the side are set as?

[@MufasuCAD]

Christopher McClendon Thank you ,,,, :) To connect you can use join command,,, the object must in same coordinate...im not use voice, to let everyone imaginary skill works (3D is about imaginary),,, Tips,,, mastering basic command,,, it will be easy to drawing... :)

[@AhmadAlAjeel]

i have a question. i have an nvidia GTX 880m sli mobile graphics card on my alienware laptop with the new intel i7 extreme 4940mx. can i still run autocad autodesk cadcam or any of those. its for architecture school. so i will be using it for architecture programs.

[@MufasuCAD]

Yups,, its a good laptop to use for architecture programs,, just use 4GB minimum RAM,, Recommend 8GB or 16GB.. for fast rendering..

[@AhmadAlAjeel]

Oh ok thanks. Yea mine is 16GB ram. I was just getting worried cause i heard that for autocad and cadcam and autodesk you need quadro ghrapics and that Geforce wont work. But thanks for conferming that i still can run it. Thanks so much :D

[@joesurfer9754]

Never, for the rest of you life buy alienware. It is way overpriced junk. You can build a computer for half the price that will put it to absolute shame and run circles around it.

[@darkstain12]

Darude - Sandstorm

[@joesurfer9754]

never buy "alienware" it is way over priced and they save money buy giving you some shitty componets like crappy motherboards etc. You can easily build your own computer that will run circles around "alienware" for a fraction of the price.

[@supraneedeesom8040]

good tutorial, one question about soft recording. How do you do it? lol

[@bilalbokasba7851]

Thank you for this informative and educational video!

[@garywong5654]

This is really cool stuffs. Thanks Mufasu. Now I learning more about 3D. Cheers mate.

[@denniskent3966]

4:20 how do you subtract the windows? i've tried it like 10 times but only 1 of the window got subtracted

[@mtbtasksupport7295]

It's really comprehensive and helped .

[@MufasuCAD]

+MTB TASK Support thanks man

[@sdhdeha1365]

it pretty much explains everything, thanks a lot.

[@jirik2935]

very helpful and simple man.. i tNice tutorialnk i'm gonna see all your videos

[@kongsomera5990]

Great video, by the way did you use normal AutoCAD or AutoCAD civil 3D?

[@MufasuCAD]

im using AutoCAD :D

[@rhonconcepcion3256]

i dont understand how you did in 17:23 ...i cant even get that door -_-...how'd you make that mouse?

[@NFM1337]

I kinda liked this one. It was easy enough to follow, and sort of zen. :)

[@MufasuCAD]

Thanks for watching

[@menchireyes6823]

sir can you give as a copy of dwg.. only that polyline drawing that is net yet extrude..so we can do the same house and follow on how you draw the house from polyline up to the end.

[@franklinchirinos9503]

gracias a estos video de autocad he aprendido a utilizarlo

[@elearninghub01]

Hey Mike, thanks for the video. I am considering purchasing soft softs for the first ti. Do you have the personal version or the

[@efrenmercado9520]

how to show the icon having by layer? before you subtract the window.

[@bumgold9043]

Thanks for the tutorial @Mufasu CAD .. but may i ask what version of AutoCad you are using ?

[@valzele2357]

totally agree with u mate! im kind of a newbie to soft producing here, well tNice tutorials video helps a lot and gives mo motivation to create

[@lutalutas8021]

autoCAD is the best for us!! B-)

[@palanipg7648]

Luta Lutas iam Palani

[@palanipg7648]

We're you sar

[@jayempizo8755]

nice tutujrial can you do a 2 floor lay out next time??

[@pi_arjun]

I am unable to extrude multiple rectangles at the same time. The rectangles get extruded in front of the house walls not inside them. I can't figure out why. So far so good, nicely done.

[@maciejrzyczniak227]

Amazing I did it You made my day Thank you!!

[@zawzawmin99]

Really appreciate the video .I would like further demonstration on how to use actual tutorial in soft to make soft .

[@joemarsamoranos9444]

i want to learn autocad. is there any aps free for download? if there's any pleas give me a link. thank you. great job anyway.

[@MufasuCAD]

Just go to student autodesk,,, you can get free for 3 years license

[@sumardipratama1821]

Bagus min. Bisa upload tutorial autocad 360 gk min untuk yang android

[@mrdubyvaj]

How do you draw that square at 2:55 ? Somehow It keeps starting at that corner to the left of it. :/

[@xinsaline3157]

Just turn on the infer constraints button on the first lower left corner.=)

[@Abdelilah2023]

You really good at explaining thank you

[@marsha9132]

Hello, does anybody have any idea why I can't make the window like in 4:25? :( The steps are only to copy the first two windows, then extrude, and lastly subtract with the larger part, but when I do that, the two windows disappear wholly. Is there any step that I missed? Thank you. :)

[@MufasuCAD]

+Marsha Tinambunan Its subtract command that use to make hole on wall,,, the 2 objects rectangle is used to make it

[@marsha9132]

I used the Subtract command but the whole rectangle disappeared. :( Did I miss something?