This guy is the best I ever seen when it comes to body work. Wish he was near by.
@aldotgomez6 ай бұрын
It be nice if he would explain some of the things
@mullac7206 ай бұрын
Subtitles give extra info
@ronsworld2506 ай бұрын
I just love your attention to detail and the good clean work you do. Your videos are educational and a joy to watch. Thank you for sharing.
@RdlfxsАй бұрын
Welding 0.9mm sheet with flux core, that's impressive
@dde61276 ай бұрын
i love the idea of using simple things to assist u with the work like the magnets and the tape
@ChinitFxt6 ай бұрын
Dude your craftsmanship is superb
@zbigiziomolszew37322 ай бұрын
Very nice job! I love watching your work before sleep with some music, it is just my chilling zone Regards from Poland!🙂
@ej6kenny966 ай бұрын
So nice to follow this process, amazing what you do to this car, they start to get rare in an good condition.. masterpiece🤩
@mullac7206 ай бұрын
Glad you enjoy it!
@Y0ELTV6 ай бұрын
I was waiting for a long time, greetings from argentina.
@Roverjoe6 ай бұрын
Loving the Attention to detail with fabricating them panels. those little indents where the grommets go on the Upper sill section will make all it look like factory once its all put back together. Cracking Job!
@mullac7206 ай бұрын
Thanks mate 😁♥️
@cg79756 ай бұрын
This is truely a wonderful repair. The eg hatch is intricate around the rear of the sill and the jacking point - difficult to fabricate and the near sude is worse with the filler neck. Also - repair panels are the wrong shape - no flair on the wheel arch the way it should be. Early repair sections had it - but they are no longer available. Great video and thank you for sharing.
@mullac7206 ай бұрын
Thank you. Gotta use what you can 👍. Thanks for watching ♥️
@aldotgomez6 ай бұрын
I am doing the same thing to my, only thing is my doesn't even look like she'll or like it was something. Watching your videos has given me a batter idea of how to build it. Keep up the good work 💪
@pangpondzalim6 ай бұрын
I'm from Thailand, I really like watching your videos.
@mullac7206 ай бұрын
Thanks for watching ♥️
@andrewgrace44103 ай бұрын
Nice prep work 😊
@HONDAvod6 ай бұрын
очень приятно смотреть особенно понимая что летом придется делать практически такую же процедуру на своей EG, удачи в ремонте с нетерпением жду продолжения) много интересных решений и моментов подмечаю спасибо большое.
@mullac7206 ай бұрын
Appreciate it. thanks for watching the vids
@thanosmaganiaris29606 ай бұрын
car is coming real good keep it up man work will pay off at the end. you are the best i have seen so far when it come to metalwork.
@mullac7206 ай бұрын
I appreciate that!
@Laner846 ай бұрын
Such impressive work , and with simple tools too , its certainly inspiring to get myself in gear to get on with my. 95 prelude loving the videos and your channel
@mullac7206 ай бұрын
Thanks mate ♥️, love the preludes too 😍😍
@Laner846 ай бұрын
@@mullac720 well if you find yourself" un busy" there's one here that needs some of that love you giving the EG haha 🤣 also I've re edited my last comment as I made myself look a tad special with that spelling 🙈🤣
@dde61276 ай бұрын
ive been waiting for this so long keep the good work man
@jornpvp6 ай бұрын
Nice job man!!!! Cant wait to see this car turn into a ricer
@mullac7206 ай бұрын
😂😂😂
@berkay.yildirim5 ай бұрын
Awesome hand works🙏🏼🫡
@Grant76 ай бұрын
Very nice work
@rediyusputra83336 ай бұрын
nicely done
@SuperStelar5 ай бұрын
Друг, подскажи, какой клей наносил на левую арку?
@bernardovti6 ай бұрын
Awesome
@dennischandra73386 ай бұрын
woww i love this !!! anyway if i have eg6 the condition like yours how much if i want restore it 🤤
@ace__damage18366 ай бұрын
делает кайф хондоводам. лучший подход
@user-mh8ku9pw8o6 ай бұрын
Добрый день. Пожалуйста ответьте, что за состав вы наносите на края элементов из баллончика золотистого цвета перед нанесением грунта.
@mullac7206 ай бұрын
Copper Weld through primer.
@The_TOMMYRAZOR6 ай бұрын
Phenomenal attention to detail. Are your plans to bring it back to stock then modify?
@mullac7206 ай бұрын
Yeah just tastefully modified. Not back to stock stock 😁
@duyly70926 ай бұрын
This is so incredible! How were you able to weld in the new quarter panels without it warping the metal? Ive done this before, but no matter how slow i go, it ends up warping...
@mullac7206 ай бұрын
Really slow and putting compressed air on it helps. But there was some warpage on one side. But I just knocked it out with a hammer and dolly.
@Unit-896 ай бұрын
welder was setup really well, which one you using and wire etc?
@mullac7206 ай бұрын
Cheapy wolf mig 140, don't think you can buy them new anymore. And using lidl/parkside 0.6mm flux core wire 🤣 really should go to gas so it's easier for the thin sheet metal😱
@stephendowney49306 ай бұрын
nice job were u happy with the quaters and i see there's a sliver one on DoneDeal for just under ten grand so you're in the money
@mullac7206 ай бұрын
Yeah happy enough. Came out pretty nice, won't need much work before paint 😁. Yessssss 💵💵💵 🤣
@sheldonjackson86233 ай бұрын
Hey anyone know the name of the tool at 20:43 not the magnets but the little boxes if y’all know of any good magnets like this tell me too thanks !