Multi-step Wash on NEGLECTED paint: the how-to guide! (Jeep series #2)

[@adamstrachn]

Ahhh, the lovely back sweat! 😂 That's every wash here in Orlando. Another great video with tons of useful info gents! Be well ✌🏼

[@diydetailofficial]

Thank you! You too!

[@jeffb7750]

100K Subscribers as of right now! Congratulations DIY Detail!

[@diydetailofficial]

Thank you.

[@DizConnected]

I am neglected! I need more DIY Detail in my life!

[@diydetailofficial]

More to come!

[@geddycostello8439]

I just used incredible suds on a 2021 Rav 4 and man It made the contact wash 100% easier. Lifted all the road film off of the Rav4 and I really like the grape scent in the product.

[@diydetailofficial]

Thank you.

[@rickcarney4535]

Just need to get my decon towel and iron remover and I'll have all I need to do my first ceramic coating. Diy 3 yr for the first attempt. Thanks for the great products and videos guys.

[@diydetailofficial]

Thank you.

[@Pittsburgh-412]

Congratulations on 100k guys!!

[@diydetailofficial]

Thank you!!

[@davestewart9146]

I really appreciate the hard work you guys put into your videos and a special thanks to your wife Yvan for her hard work also 😁👍

[@diydetailofficial]

Thank you so much!

[@DetailsNMe]

Great video!! Everytime I use Incredible Suds it makes my garage and driveway smell soooo good!

[@diydetailofficial]

Thank you.

[@greghaefs4677]

Impressive videos - you keep coming up with more ways for me to learn. Thanks for sweating that out!

[@diydetailofficial]

Glad to hear it!

[@tag_76]

If I'm going to iron decontamination, compound/polish, and seal the paint after I'm done washing, I use a healthy amount of Dawn Platinum in my foam cannon. It really does an incredible job at lifting and running off a ton of dirt and crud.

[@diydetailofficial]

Thank you.

[@rvazquez818]

2:26 Thank you for the exact dilation ratio. All Clean / Incredible Suds combo.

[@Yessolution37]

1 gallon of water, 8 ounces all clean and 1 cap full of incredible suds

[@rvazquez818]

Thank you. 😊​@@Yessolution37

[@diydetailofficial]

Thank you.

[@TheBreakfastLover]

This could be the video that gets you to 100k subscribers.

[@diydetailofficial]

Wow, thanks

[@gtileo]

As a pre wash i mix 300ml of All Clean and 700ml of turtle wax max power in my foam cannon and i hit the paint. It's not the most foamy soap but it's a high pH and it's cheap, together with the all clean and a high concentration it makes a good foam and keeps the ph higher to help break down dirt and traffic film on the paint. Then I'll hit it with Incredible suds for the contact wash

[@diydetailofficial]

No need to do that. The recent fad of high PH is just that. DIY Detail Incredible Suds is all you need.

[@atouchofhutchad]

Great video guys! Very informational.

[@diydetailofficial]

Glad you enjoyed it!

[@dmbsituation]

Definitely a fan of the rinseless wash. Don’t always want the foam and can knock out maintenance wash and dry in 30 minutes with rinseless.

[@diydetailofficial]

Perfect

[@FelixBouchardDetail]

Great video!

[@diydetailofficial]

Thanks!

[@c.c.5472]

Gents, another interesting and informative tutorial. Nice job. Quick question, I only use iron remover on my vehicles a coupon of times a year. For the other times can I use the decon towel with just incredible suds or should I use an additional lubricant like a clay bar lube? So far I’ve used a clay bar lube each time, to be safe. Thanks.

[@diydetailofficial]

Use either DIY Detail Iron Remover , or DIY Detail Ceramic Gloss

[@Pittsburgh-412]

Think your ceramic coat had failed? Try water spot remover. It has worked magical wonders and made my coating come back from what i thought was dead

[@diydetailofficial]

DIY Detail Water Spot Remover and the Perforated Synthetic Decontamination Towel should not be used together though

[@Pittsburgh-412]

@diydetailofficial shit your right lol. I did not mean to say that. I was trying to remember what I did. I did the clay towel first. Then after decontamination I used the water spot remover. Thanks for clearing this up 👍

[@curse6of6me6]

The brush did all the work in those crevcies guaranteed itll keep coming out when you give a final rinaw. Guaranteed. Im just blown away your washing a half dirty car. Weird.😊

[@diydetailofficial]

They always look cleaner on film

[@KatrinaTrys]

I have been told I SHOULD NOT use the same brushes on the cracks and emblems than the tires!!! 😂 Glad to see I am not ALONE! To me, if I am cleaning them, like one should, why does it matter? KISS (keep it simple stupid 😂) method!

[@diydetailofficial]

Right on!

[@szakacsattila2505]

Will I ruin my Koch Chemie paint polish if I add distilled water into it in order to make it more liquid so I can use a sprayer like you guys have on the Gold Standard Polish? I’m from europe, and have no possibility to buy your products in my country 😢

[@diydetailofficial]

It must be formulated to be sprayed. Https://diydetail.com/pages/distributors

[@RossT551]

Great video guys.. In hard water areas like mine, would it be beneficial to put some riseless wash in a bucket of incredible suds? Thanks

[@diydetailofficial]

No

[@Juicefree]

Could you use the detail brush if using a rinseless wash?

[@diydetailofficial]

Yes

[@barrybinning3849]

I just got a mjjc pro 2.0 foam cannon. Would this work with all clean and incredible suds

[@barrybinning3849]

Forgot to say i have a pressure washer 3200psi 2.5gpm

[@diydetailofficial]

Yes

[@GoTMLGo1967]

As long as it’s 15:1 ratio in any foamer of all clean?

[@diydetailofficial]

Yes

[@Austin23_23]

What product do you suggest to protect trim on a 2 year old car? It’s in great shape just want to protect it.

[@diydetailofficial]

DIY Detail Plastic Restore & Protect

[@larryleerssen2562]

Great video, really helpful with ratios Where do you get your gloves

[@diydetailofficial]

amzn.to/3WrefBu

[@marteaubu]

steamy hot video , thanks!

[@diydetailofficial]

Thank you.

[@patrickadams2824]

Will the diy detail wheel barrel brush scratch or mar gloss black wheels? And is it safe on coated barrels?

[@diydetailofficial]

How you use it is important.

[@ziads3653]

Hey guys, I ran into a similar situation where even after going over the entire car with the Decon towel and iron remover, I still had purple lines due to rust in the paint, I can even see the orange specs. Do I just need to do a decon again?

[@diydetailofficial]

If you’re polishing, no

[@ziads3653]

@@diydetailofficial ah unfortunately I’m not at the level where I’m comfortable with a polisher…

[@karlheinzpiel3311]

Love to have your stuff in Germany👍first order is completed, but I missed the wheel-/body brush and c6 mist?

[@diydetailofficial]

Https://diydetail.com/pages/distributors

[@border056]

Can you run all clean in a foam cannon 15:1 with some incredible suds?

[@diydetailofficial]

Yes

[@alexg6299]

When are you guys gonna restock the 3 year ceramic kit?

[@diydetailofficial]

This week

[@originalguy4535]

Reason for using mitt instead of sponge?

[@diydetailofficial]

Just for a change

[@makaliiomori9296]

Would it be okay to use detail brushes with rinseless foam/rinseless?

[@diydetailofficial]

Yes

[@I_dont_gamble]

You guys do great videos and explain everything well 👍🏼 for real I watch everyone I’m just a weekend warrior on my car and family’s

[@diydetailofficial]

Awesome! Thank you!

[@jimmy9868]

Greetings from 🇮🇳 Sir recently i had a long trip My car got tar strains at the front and at left right mirrors tooo ,it looks like the black spots are incoporated inside the paint i did try using tar remover ,diesel,and even apply compound NOTHING HAPPENED PLZ PLZZ HELP ME

[@diydetailofficial]

Remove the surface tar , then expose it to sun for a while, they will fade away

[@jimmy9868]

@@diydetailofficial tar is not able to removed it looks like it has been engraved inside

[@diydetailofficial]

The staining will be removed from the sun, be patient

[@jimmy9868]

@@diydetailofficial how to remove the tar spots then?these are engraved should i let the tar remover rest in sun????

[@diydetailofficial]

You used tar remover, the physical tar is gone, but the paint is stained. Sun will clean of the stain

[@eddieblount216]

What has more lubrication rinceless or incredible suds?

[@diydetailofficial]

Equal

[@tonykemper8896]

cn you put all clean in a foam canon?

[@diydetailofficial]

Yes

[@joelmunoz2330]

Can you use All Clean diluted 15 to 1 on a foam cannon?

[@diydetailofficial]

Yes

[@fookatan]

How would you mix all clean in a foam cannon on a pressure washer?

[@diydetailofficial]

4oz

[@fookatan]

@@diydetailofficialthank you

[@andrewkennedy9704]

You fine folks doing videos on that lovely blazer?

[@diydetailofficial]

Coming soon

[@1stfrompuertorico568]

First and ready

[@diydetailofficial]

Thank you.

[@btbd2785]

Have you ever had issues with the IK Foam Pro 12 "sputtering"? So not even dispersing of product, like a sniw foa. ? I have replaced the filter and still have an issue. Just curious

[@diydetailofficial]

Yes, if pressure is under 45psi it will do that

[@Pittsburgh-412]

Maybe the seals are gone

[@RemedyAutoDetailOfficial]

It also sputters if it doesn't have the correct dilution as well. The more diluted it is , it will sputter!

[@matthewwingle4637]

Do you clean the tip and filter after use, or at the end of each day, week?

[@alexkybal]

what year Jeep is that?

[@diydetailofficial]

2015

[@tony8354586]

C6 hydro glass on a shower door…app or prep? Saw a video in which app was used on windshield….

[@diydetailofficial]

DIY Detail Panel Prep

[@tony8354586]

@@diydetailofficial am I supposed to use prep or app before applying for the longevity?

[@diydetailofficial]

On glass C6 Ceramics Adhesion Promoter Polish (APP) presents no advantages. Use DIY Detail Panel Prep

[@tony8354586]

Thank you, was just confused when you and John “I believe “ were detailing a car and you guys were using Phendo polisher and using app on the windshield…

[@DriveVibeAuto]

Mount Brushmore

[@diydetailofficial]

Yes

[@corman2332]

What creeper is Nick rolling around on?

[@diydetailofficial]

It’s a prototype

[@btbd2785]

Could do PDR and get those dents out

[@diydetailofficial]

Where the tree fell , it’s beyond PDR

[@curse6of6me6]

Do you reckon the wheels have seen better days? Say it again for the people in the back. P.S Yvan, tell me im not the only one whom reckons your stealing charles bronson appearance?

[@diydetailofficial]

I’ll have to look up who that is.

[@mhawk8264]

I do like your videos. You do tend to give a lot of information. I would enjoy them more if Nick didn't act so ignorant and talk to viewers as if they were complete and total idiots.

[@diydetailofficial]

Thank you.

[@curse6of6me6]

25 degree nozzle vs 40 degree will yield no difference. That made me laugh.

[@diydetailofficial]

It does

[@curse6of6me6]

The bleeding is the proof the towel is not so great for a dirty car. Fact

[@diydetailofficial]

Have you tried it?

[@curse6of6me6]

@@diydetailofficialnot as of yet. But I think it's more for light clay jobs yeah?

[@diydetailofficial]

It will do all but the most severe jobs.

[@redsvette]

Pointless dent repair may work on that hood.

[@diydetailofficial]

Where the tree branch fell, its beyond pdr