MultiECUScan Package in Real-World Use

MultiECUScan v1.5 being demonstrated on a 2007 Fiat Grande Punto - including component actuations and CAN info.
Gendan Automotive Products are the largest authorised UK distributor of the MultiECUScan software package - we have a variety of package options available to suit home users right though to garage professionals - see our package chooser at www.gendan.co.uk/mes_chooser.php
Some sequences in this video are shortened

[@GendanAuto]

The only settings that MultiECUScan can change are options that were available in the original Fiat software on the module - things like disabling the seatbelt warning for example. The automatic wiper in reverse is standard across the range, so it's doubtful there would be an option to turn it built into the car. The only way would be to manually recompile the code for that module with the function removed and re-flash the ECU. (MultiECUScan cannot do this though!)

[@GendanAuto]

Hi wills elevens. I was sure we'd replied to this, but the reply appears to have disappeared. Select the vehicle > Body section > Body Computer Delphi > Connect The go to the Adjustments tab. The "Indicators command" looks to be what you're after.

[@kmvelocimetro8138]

oi tem como vc estala programa no meu computado pelo

[@willseleven1]

Very useful video. But I didnt notice an option to activate lights when you open or lock the doors. If you know how to navitage to that please reply. Thanks anyway

[@britishskiing]

Hi Gendan! Great video. New to this. I have a 2015 Abarth 595 and I want to remove the ‘hazard warning light under heavy braking’ function. Can this be done and do you sell the cables I need to connect to the car and USB on my laptop?

[@malcscer]

Is there a way you can change the VIN no on the 7'' Uconnect Head unit on a FIAT 500 2017?

[@nunoguedes7134]

Does this allows to activate the Cruise Control function for the Lancia Lybra 1.9JTD? Thank you.

[@asimtopic3543]

Hi....does with this one l can do a reset (safetly)trothle body or ECU..l was cleaning it and make it wrong.My rpm idle go up to 1500 to 2200 .Alfa 2.0 selespeed .l already change some part but nothing beter.

[@GendanAuto]

What specific model car is this on?

[@ron999]

I have Grande punto 1.9 multijet with factory cruise control. Last owner changed M32 faulty gearbox with another M32 in good condition. Cruise Control from then work in 3,4 th gear but no in 5 and 6 gear. Cruise Control light works, everything is fine but if CC don't work in 5 and 6th gear it's useless. Can i learn ecu or something with multiecuscan to start properly working ?

[@GendanAuto]

Hi Ron, the software offers some self-learn functions. If you download the free version and run in "simulation" mode, it will show you what coverage it would expect to offer on your car.

[@asimtopic3543]

A.R. 156 2.0 cccm selespeed. Engine code AR32301 , 114 kw..Cleaning throtle body l was mistake and now must reset ECU or just throtle body .I have multiscan older one(registered) but there no option to reset.l also download new version but say me the module not alove to scan ,what module is l dont know,probably my interface....

[@GendanAuto]

The software supports "self adaptation reset" on some engine controllers but I don't know if that will help. Your best option would be to email [e-mail]

[@kasapis6]

Hi just like to know can you print I can not see how you do this please let me know how to thanks

[@GendanAuto]

I don't believe you can print from within the package at the moment. You can export the live data graph output to a csv and print that via Excel though.

[@dan_austin__873]

Hi im having trouble accessing the airbag module. You say something about a yellow connector but im not sure what you mean? this is on an alfa romeo 156 2.0 TS 2000 model

[@dan_austin__873]

Oh I found the MultiECUScan cables package. Thanks! Didnt realise I would need obd2 adaptors to make this all work haha.

[@GendanAuto]

If you are using standard ELM / KKL cables they can only communicate on certain pins on the port - the ones used for engine diagnostics - typically pin 7 for K-line protocols and pins 6 & 14 for CAN. Where systems are on other pins on the port you need adaptor cables to redirect communications to those pins. The Grande Punto uses 2 CAN buses, so the yellow adaptor redirects the CAN pins. For a year 2000 Alfa 156 airbag you need a KKL interface and the red adaptor, which redirects pin 7 to pin 3: www.gendan.co.uk/product_FESRED.html See www.multiecuscan.net/SupportedVehiclesList.aspx for full coverage details.

[@ginobragoli1448]

I have a 2008 grande punto t-jet and service it myself so would like to reset "expired service coupon" displayed on the dash. Is this something I can do with a WiFi 327 interface my android phone and the free ecumultiscan software ? Do I need anything else? Many thanks

[@GendanAuto]

Hi, no there is no Android version of Multiecuscan. You would need to use a Windows PC. You'll need: - an ELM327 compatible interface - a yellow CAN Adaptor cable (to access the secondary low-speed CAN bus) - full version software license. If you have a PC, our CAN bundle includes everything else you would need: www.gendan.co.uk/product_FESCAN.html

[@andreportugal8913]

Good evening I tried to connect to bluetooth and is not finding, what i can do? is the bluetooth? mine is the ELM 327 bluetooth mini and its only for bluetooth. I've tested with the scanmaster and work but this program does not erase the mistakes because mine is a Lancia Lybra and this program dont erase the errors of this brand

[@nunoguedes7134]

Conseguiu colocar a funcionar na Lybra? Eu quero ver se coloco o Cruise Control a funcionar, também numa Lybra. Obrigado.

[@GendanAuto]

It's not something we have done, no. We've always deliberately avoided stocking tools that offer ECU flashing capabilities due to the damage they can cause if you get the software wrong.

[@paulwoollock6332]

Hi, I have a 165 and 105 bravo, will this reset dpf and service token after a service, thanks

[@GendanAuto]

Hi Paul. We'd need more than 165 / 105 to check. What model, year and engine are each of the cars?

[@paulwoollock6332]

165 multijet sport 2010 105 eco multijet 2008,both bravo, thanks

[@GendanAuto]

What do you mean by 165 / 105? Power outputs? What engine sizes are the cars?

[@paulwoollock6332]

Yes power output, do you not know about the cars you are selling products for, 1.6l common rail diesel, 105 bhp 2008, 2,0l common rail diesel, 165bhp 2010,thanks

[@GendanAuto]

No, we don't know the power output of every engine in every vehicle (why would we?) On both the 1.6 and 2.0 diesels on the 2007-on Bravo, MultiECUScan supports both the oil service coupon reset on the instrument cluster, and the DPF oil change reset on the engine ECU.

[@Litesnip2022]

Can you programme keys with this?

[@GendanAuto]

Yes, on the latest versions you can code keys on many supported models

[@alessandrovalerini]

@@GendanAuto who?

[@GendanAuto]

@@alessandrovalerini I don't understand your question. Who what?

[@alessandrovalerini]

How do you program a key?

[@GendanAuto]

@@alessandrovalerini Connect to the Body Computer, then choose Adjustments. The option will be on that page if supported. READ ALL THE NOTES before trying it!

[@zzhughesd]

No