Multiplex Funray 2m Motorglider Review & Maiden Flight

[@tediouja8099]

Congratulations, nice flight! What kind of connector comes with the stock glider’s ESC? Did you replace it? Thanks.

[@northswedenrc5260]

The plane came with a german connector, so i changed it to my own.

[@tediouja8099]

Ok 👍

[@Schaumwaffelflieger9]

@@northswedenrc5260 LOL ... a "german connector" ^^ The system is called MPX plug.

[@Tupi68]

Nice video :-)

[@philippstru7279]

Which receiver did. you built in there. If Spektrum which one ?

[@northswedenrc5260]

I use SPEKTRUM AR 6600 Telemetry Reciever, and Multiplex Multigyro G-3

[@philippstru7279]

NorthSweden RC I have a Spektrum dx6 g2. Do you think the Receiver works with this Transmitter? And did you have any problems with the range with your Setup? Which transmitter do you use ? It would be nice👍 if you will answer because I donˋt have much experience with Spektrum Receivers and I donˋt want my Funray to crash because of transmitting problems.✈️💥

[@northswedenrc5260]

@@philippstru7279 Hey, i have an Spektrum DX9 and your DX6 G2 Works as well as mine. I havent had any range problems. Tip, check out Lemon RX plus receiver. Works very well with Spektrum transmitters and they are full range and cheap. I only use this receiver now in my PNP planes. Lemon RX Plus have 3 modes, Stabilizer off, Stabilizer on and Self level mode, and it binds on any switch. Hope it helped you.

[@philippstru7279]

NorthSweden RC It helped me a lot but do you use 6 or 7 channel receivers from lemon rc ? As I saw on the Lemon rc website the 6channel Receivers aren‘t stabilised. Only the 7 Channel ones are stabilised. Is this right ? And is it possible to Fly 7 Channel Receivers with my dx6 6 Channel Radio ? I‘m sorry for asking you so many things, but the funray is only my second plane I bought in pnp. I ˋll be happy if you would answer👍. Philipp

[@northswedenrc5260]

@@philippstru7279 I use 7 channel RX Lemon Plus. You need an Y-cable for the ailerons to the receiver and you must leave the gear port in the receiver open. And then you have the 3 modes in the stabilizer, on a switch when you bind it. I think it may work with your transmitter. OBS you need an 3 step switch for the modes to get them all. And for flaps you can choose an 2 step switch. Flaps off, and landing flaps. Thats all what you need in your glider. Good luck!

[@56Gumball]

It makes me cringe seeing folks reach their hands and wrists OVER the propellor. It’s a very bad accident waiting to happen.