I sure love the whistling sound of a glider slipping through the air. Beautiful Andrej! - Lauren
@AndrejSturm3 жыл бұрын
Hi Lauren. Glad you enjoyed it! Greetings from Slovenia 🇸🇮
@julianhumphrey48433 жыл бұрын
That was a very nice flight, really enjoyed that, smooth take of, nice flying good swoosh noises and a buttery landing
@AndrejSturm3 жыл бұрын
Glad you enjoyed it, Julian 😊
@RobisonRacing683 жыл бұрын
Hi Julian! :)
@julianhumphrey48433 жыл бұрын
@@RobisonRacing68 Hi lauren, hope all is good with you
@Brian-om2hh2 жыл бұрын
Beautiful, absolutely beautiful. I have a Heron, but I'd still love one of these..... The sheer efficiency of the airframe must be high indeed.
@ToddBreda2 жыл бұрын
Okay a year later and I finally pulled the trigger as I found a US distributor. I cannot wait to get my hands on her! She looks fantastic in the skies and on the ground. Still a bit pricier than I would like (would prefer a $550 price point) but you do get what you pay for in this hobby so I totally get it.
@rcfan85 Жыл бұрын
Where did you get it buddy? I’m thinking to get one . Thanks
@martinkrimmling31563 жыл бұрын
Uff, ich brauch ne neue Schaumwaffel !!! Besser kann man das Modell nicht in Szene setzen - super geflogen und sehr guter Videoschnitt !!!
@volkerracho72573 жыл бұрын
nice flying demo! did you tape the Hinge gaps ? i think most of the whistle comes from the small gaps on the downside of the wing
@AndrejSturm3 жыл бұрын
Hi, thank you. I did't tape them.
@mostlydollshelicopters47993 жыл бұрын
Great video to watch with the beautiful scenery as well . 👍✈ . ❤ this video .
@AndrejSturm3 жыл бұрын
Thank you very much 😊
@ToddBreda3 жыл бұрын
She looks like a winner! I've had my eye on this one since it was released. I wish there was a US distributor selling this beauty. Nice flight and video!
@AndrejSturm3 жыл бұрын
It is. The shipping from Europe is probably very high, right?
@ToddBreda3 жыл бұрын
@@AndrejSturm Yes correct and at the price point it's just too much for me to pull the trigger.
@AlanMydland-fq2vs Жыл бұрын
who are they?
@13thnotehifireviews72 жыл бұрын
Nice video , thanks. I just bought an rr one, had a cularis before. Just wondered, did you use the recommended 11mm elevator up and down movement and was it enough in flight as I couldn’t be bothered to take the decals off and that’s the max movement I’m getting.
@AndrejSturm2 жыл бұрын
If I remember correctly I've set all the throws according to the manual.
@phildardecolmar3 жыл бұрын
Hi, nice vid 😊. Could you share your TX configuration file ; I'm interested in how you configured your flight modes with opentx Thanks
@ReneLoek-on5jt3 ай бұрын
Hello Andrej. Thank you for your great video's of the Lentus. I have a question regarding the elevator. There is just a little up movement. How can i adjust or improve the up range of the elevator. Can i remove the Rudder to mechanically change something? Or?
@AndrejSturm3 ай бұрын
Hi. You have to detach the pushrod from the elevator and then turn it counter clockwise (this way you unscrew it a little - it gets longer - more up elevator). Please try that and report back if it worked - It has been a few years now since I have assembled mine, so I am not 100% sure.
@ReneLoek-on5jt3 ай бұрын
@@AndrejSturm Thank you so much! Keep posting the beautiful flights! Greetzzz from The Netherlands!
@ReneLoek-on5jt3 ай бұрын
@@AndrejSturm It worked! I don't know have far you can do this, but is was enough to have a bit more up! So thanks again!
@ac8083 жыл бұрын
Nice purchase Andrej! What Rx are you using in the new Lentus?
@AndrejSturm3 жыл бұрын
Hi Andrew, I am using the Rx from my Staufenbiel Epsilon XL3: FrSky D8R-II PLUS.
@amirhanna2952 жыл бұрын
It's that scenery that's priceless. Did you get the PNP or kit version?
@AndrejSturm2 жыл бұрын
Mine is PNP.
@maciej.tokarz2 жыл бұрын
Dziękuję za świetne filmy - planuję właśnie zakup pierwszego szybowca i będzie to Phoenix 2400. Pozdrawiam, Maciej
@SuperStoatman3 жыл бұрын
Dear Andrej, you also have raised leading edge of elevator by 2mm as is shown in one of german video?
@AndrejSturm3 жыл бұрын
I didn't changed that.
@andyMSH700 Жыл бұрын
dont u just love gliders its something about free flight that is addictive...even if u have the emergency motor to lit and get height.......look how well a foam glider flies...thats crazy the g forces and its still in one bit...i fly with carbon and am afraid. great u managed to program the T16s as its the way to go.....i am still stuck on futaba for my big gliders but have used radiomaster for all my helis...slowly changing as i think futaba is way too expensive and falling behind in technology now. nice flying skills
@thomasfischer10173 жыл бұрын
Magic...Lentus 🛩E-Glider😉🌠🌠🌠
@thierryjuret15613 жыл бұрын
better to have the motor on a 3 position switch and the croco (brakes) on a stick. You can try also the reverse looping: it does it easily! Really fantastic glider!
@AndrejSturm3 жыл бұрын
You are right, that way I would have more control over the brakes.
@pp-pz7ty3 жыл бұрын
@@AndrejSturm I use engine stick for motor or crow ( change on switch) - very easy in OpenTX.. Crow on stick is very useful.
@northskyrc36703 жыл бұрын
Tell me what is the difference in flight between Lentus and Solius? Best Regards
@AndrejSturm3 жыл бұрын
I've made just 5 flights so far with my Lentus. SOLIUS: more nimble, aerobatic, especially on the roll axis. LENTUS: more options for the flight optimisation (thermal mode, speed mode, crow brake, ...) as it has flaps, better thermal performance, larger, much nicer look in the air. I will be able to tell more in the future.
@michaelk.93973 жыл бұрын
@@AndrejSturm Dear Andrej, I remember you had an Epsilon XL3 as well. Because of your Videos, I always had an eye on that plane. Now I have one :-) . Is there any chance to compare the Epsilon with the Lentus?
@SuperStoatman3 жыл бұрын
Please Can you write here your setup for Lentus? (Engine, ESC, Servos, Aku). Whats your final fly weight.? Thank you.
@AndrejSturm3 жыл бұрын
Everything is stock that comes with the RR kit, except the recommended folding propeller blades for 4s lipos: www.hacker-motor-shop.com/Air-screws-and-accessories/Folding-propellers/aero-naut/Aeronaut-CAM-Carbon-8X6.htm?shop=hacker_e&SessionId=&a=article&ProdNr=10618401&p=1960 I am using a Turnigy Nanotech 4s 2200mAh 45-90C lipos. I have never checked the flying weight of my Lentus.
@SuperStoatman3 жыл бұрын
@@AndrejSturm ....thank you. Have a nice day
@0Matt0 Жыл бұрын
Wahou ! What a beautiful place ! Where is it please ?
@AndrejSturm Жыл бұрын
Thank you 😊 I live in Slovenia.
@arthusfpv59003 жыл бұрын
hi, nice vidéo. Do you use 4S or 3S batteries ?
@AndrejSturm3 жыл бұрын
Thanks, I am using a 4s 2200mAh lipo and 8x6 CAM prop.
@arthusfpv59003 жыл бұрын
Thank's
@philippeneuhaus56943 жыл бұрын
Absolut tolle Videos die Du da machst. Mein Kompliment. Du scheinst viele Schaum e Segler geflogen zu haben, deshalb hier die Frage nach bestem Preis Leistung Verhältnis. Tippe auf volantex asw 28, was sagst Du?
@AndrejSturm3 жыл бұрын
Thank you Philippe 😊 Yes, the performance/price ratio is very good for the ASW28 indeed. The same is true for the Multiplex Solius.
@Soryt3 жыл бұрын
After long thinking , i orderd one to . i fly a lot with the Heron & Solius and love to fly them ., 😎✈ i hope it is as good as you are showing 👀👍😎
@AndrejSturm3 жыл бұрын
That's great 👍 Good decision! I am sure you will like it! You'll have a nice collection of gliders now 😁
@philippeneuhaus56943 жыл бұрын
Ist der lentus so Viel besser als der volantex asw 28? Preislich sind das ja Welten
@AndrejSturm3 жыл бұрын
The Lentus is a little too expensive for what you get ... it's a good plane though.
@m.s.aviation70653 жыл бұрын
I don't even own it and I can tell it's worth the money. Great video and great flying!
@AndrejSturm3 жыл бұрын
It really is! Thank you 😊
@Garethfrostturkeythroat1133 жыл бұрын
Great upload does it like to stay in the air long
@AndrejSturm3 жыл бұрын
Yes, it's a great thermal glider, better than the Solius - which is good too.
@vinzenzwildmann54603 жыл бұрын
How many Cost that plane?
@AndrejSturm3 жыл бұрын
The price: www.lindinger.at/en/AIRPLANES/MODELS/Electric-Gliders-Hotliners/MULTIPLEX-Lentus-ThermalRR-made-of-Elapor/9780799
@vinzenzwildmann54603 жыл бұрын
@@AndrejSturm thank you
@smartiboo3 жыл бұрын
Beautiful.
@princsymbol7132 жыл бұрын
Super video
@sbogdan13 жыл бұрын
Very very nice
@RCracingSLO3 жыл бұрын
Nasvet - na levo ročico gre proporcionalni butterfly, plin pa na stikalo.
@AndrejSturm3 жыл бұрын
Ja, imaš prav, tako bi imel boljšo kontrolo. Bom videl ... tako imam nastavljeno zato, ker sem tako navajen že od nekdaj in se mi zaenkrat ne da navajat na drugačne nastavitve.
@RCracingSLO3 жыл бұрын
@@AndrejSturm res je, težko se je na novo učiti. Ko sem sam začenjal s tem, se lahko zahvalim sotekmovalcem, ki so mi pomagali.
@fellpower3 жыл бұрын
If a glider doesnt break, when Andrej fly - its a good product. BUT...i dont like MPX politics - selling a foamie for 600 bucks...
@Brian-om2hh2 жыл бұрын
It seems like you haven't owned a Multiplex foam model? These really are a cut above the rest, and the RR versions have top notch motors and ESC's in them. I have the Funray, the Funglider, the Heron, the Twinstar and the Easystar. I've been flying my Easystar for over 8 years now, and nothing has failed. A friend of mine feels pretty much as you do, that Multiplex models are way overpriced. So he's bought several cheaper ARTF's. And servos, receivers and airframes have all failed in one way or another. I get nothing like that. And if you want to sell a Multiplex model, you'll have little difficulty doing so, as they have a solid reputation.
@arthurvanaalst2 жыл бұрын
I wish all Russian people the best and know we love them