Рет қаралды 93
When a kantha is being made, first the sarees are joined to attain the required size, and then layers are spread out on the ground. The cloths are then smoothed, and no folds or creases are left in between. During the process, the cloth is kept flat on the ground with weights on the edges. Then the four edges are stitched and two or three rows of large running stitches are done to keep the kantha together. At this stage, the kantha can be folded and stitched at leisure time.Originally, designs and motifs were not drawn on the cloth. The design was first outlined with needle and thread, followed by focal points, and then the filling motifs were done. In a kantha with a predominant central motif the centre was done first, followed by corner designs and the other details. In some types of kanthas (carpet, lik and sujni, etc.) wooden blocks were used to print the outline. The blocks are replaced today by patterns drawn in tracing papers. Book yours at 9748655811 #kanthastitch #kanthastitchsaree #kanthawork #kanthasaree #kanthaembroidery #sareeloveforever #pujo2024 #pujorelease2024 #PujoSpecial #pujocollection #pujovibes #kanthacollection #nakshikantha #kolkataboutique #shuklaroylabel #embroiderysarees #handembroidery #handembroideredsaree #handworksaree