Mustang 5.0 Bumper Upgrade | MP Concepts GT500 Bumper

Today we have a 2016 Mustang 5.0 that needs a facelift! We custom paint match and install this MP Concepts GT500 bumper which gives the entire car a whole new look! Stay till the end for a cinematic experience!
Product Links:
• 3M Blue Vinyl Tape: amzn.to/3iCkgap
• 3M Yellow Masking Tape: amzn.to/2Xj1gFS
• 3M Reusable Respirator: amzn.to/3lT6sKU
• 3M Respirator Filter Replacement: amzn.to/3CDG2T5
• 3M Respirator Cartridge 6005: amzn.to/2VKiICa
• Spray Gun Cup, Lids and Liners Kit: amzn.to/3jNTAD9
• Spray Gun Filter: amzn.to/2X8PpKi
• Scangrip Rechargeable LED Light: amzn.to/3s9OeFP
• Tekna Spray Gun: amzn.to/3yCJNG1
• Neiko Trim Removal Tool: amzn.to/3jJl1xP
• Milwaukee Ratchet Kit: amzn.to/3yQWZrf
• Menzerna Heavy Cut Compound: amzn.to/3yCL7bX
• Craftsman 299 Socket Set: amzn.to/3CFTfL8
• Rupes BigFoot Orbital Polishing Pad: amzn.to/3lTqntg
• Rupes Orbital Polisher: amzn.to/3lU1eOL
• Good Year Rubber Air Hose: amzn.to/3CCxVWV
• Kleanstrip BD ADH Promoter: amzn.to/2VDpdqx
Social Links:
Prizm Auto Design: / prizmautodesign
Danny Kavika: / dannykavika
Parker Grayton: / parkergrayton
Rami (Mustang): / red_5.0l
MP Concepts: / mpconcepts
Keywords and Keyphrases: How to install mustang bumper, How to paint mustang bumper, MP Concepts Bumper Mustang, GT500 aftermarket bumper, how to replace mustang bumper, mustang roller video, car drone video, arizona custom car shop.

[@peterwho9380]

Amazing work and it completely changed the look of the S550!

[@PrizmAutoDesign]

Agreed!

[@mikec9636]

Just bought this bumper. And the gt500 spoiler. Thanks for making the decision for me. Thanks for the video man! Loved the great work!!

[@PrizmAutoDesign]

Thank you!

[@ChampagneDreyy]

@@PrizmAutoDesign what’s your exhaust setup? Sounds mean

[@zacharylopez4750]

Yo any tips for installing?

[@mikec9636]

@@zacharylopez4750 My son runs a body shop so he installed it.

[@joshuakazfields4374]

Wish guys with your skills lived near me. I’d buy more body kits. Good job.

[@PrizmAutoDesign]

Thank you!!

[@chrisolevich7538]

Good looking and impressive AF. If I didn’t already own a GT350 I’d be ordering today👍🏻💯

[@PrizmAutoDesign]

Thanks!

[@LeadfootLou]

Throw some black mirror caps and a GT350/GT500 spoiler on this car and it would be even more amazing. Didn't get a look at the calipers but if you put some brembos on the car to match the red on rest of the car it would give it that little extra. Excellent job on the front fender. You have a fabulous looking car.

[@PrizmAutoDesign]

Great ideas! Thank you!

[@ricrobinson4436]

Absolutely perfect, along with their Hood!!.. painted DHG for my 2019:BULLITT!!!

[@ghuff31]

I'm not a big fan of clones, but it looks really well done. Kudos

[@MannyGStatus]

Killed it!!

[@PrizmAutoDesign]

Thanks Manny!! 👍💯

[@Anubis8315]

Saving up for this can’t wait. Looking sick af 👏

[@TheRottyRanch]

wow awesome video good work

[@PrizmAutoDesign]

Appreciate it!

[@josepandal4660]

Broooo wtf looks so f#$% amazing bro bad good looking

[@antonisantonio]

I have a question my friend, i have the mustang gt 2021 with gt500 front bumper, do you know if the old headlights 2017 will fit on my car?

[@nathaniellayton9549]

Great job! looks sick.

[@timpoortinga8184]

Insane so nice

[@PrizmAutoDesign]

Thanks man!!

[@timpoortinga8184]

@@PrizmAutoDesign can you do orders from Canada?

[@tpayne3211]

Would you guys happen to have a copy of the instructions and the hardware sizes? Mine didn’t come with any and Americanmuscle screwed me over and can’t provide anything.

[@PrizmAutoDesign]

I believe it can be found online. I don’t have a copy unfortunately.

[@norwinstreden5565]

nice car

[@ASSMANSASS]

You dont show how you resolved the belly pan issues!.?. Why put the small clips on the new bumper ??.

[@PrizmAutoDesign]

Per instructions, it requires you to remove the J clips from the old bumper and transfer them to the new bumper. You then use all the existing mounting points to mount the new bumper to the OEM belly pan. What other questions did you have?

[@user-qo3qb8ez7z]

I changed my 2021 Eco and now the front sensor for the ACC isn’t working. Did you have to move it? Looks like the bumper blocks it.

[@MenaceLV]

I never got any of the mourning hardware. Do by any chance know the specs of what screws and bolts/ washers

[@PrizmAutoDesign]

We used extra hardware we had on hand, but don’t remember the exact specifications.

[@josepandal4660]

Where is your shop ro I would like to take my 5.0 and do the gt front bumper installation in my dark gray mustang 2022 5.0

[@skizilla]

Honestly, how was the MP Pieces quality? I've had nothing but QC issues with them.

[@ricksgt2012]

Bad ass!

[@shooter7780]

What about an underbelly, surely the stock one didn’t fit into the new bumper

[@PrizmAutoDesign]

The splash shield actually fit almost perfect with the bumper. Nothing a few drilled holes and some J-clips can't fix!

[@gustavotapia5736]

South mountain?

[@pinchnro]

Do you think it would be possible to put the stock fogs onto the bumper?

[@PrizmAutoDesign]

With enough modification I’m sure it’s possible!

[@joshuafranklin4485]

What's the color code for the black that you painted on the bumper

[@icyuno85]

Where did you order the matching paint

[@udayreddy6592]

How much do you guys charge for the paint and installation?

[@nathant2414]

Driver side side marker is out

[@mayhemw.6122]

What turn signal/ fog lights are those?

[@Mutedx0331]

What is the exhaust set up?

[@PrizmAutoDesign]

I believe it was straight piped with an H-Pipe but I could be mistaken. We did not focus too much attention near the exhaust while working on the car.

[@reeceaustin5639]

Looks Awesome are the head lights stock? how did you black out the corners

[@PrizmAutoDesign]

Stock headlights. Customer wrapped the corners with gloss black wrap.

[@reeceaustin5639]

@@PrizmAutoDesign awesome thanks for the reply. would you know the specs on the wheels also? love the fitment

[@kelvinperez8845]

What size are the weels

[@corporal42]

Do you work at a shop? Arw you located in SoCal?

[@PrizmAutoDesign]

Prizm Auto Design, Tempe, Arizona

[@onvlader]

How did you guys install the airbag sensors in the new bumper? I got the new bumper and it doesn't come with the fixed screws for the sensors? Thanks

[@PrizmAutoDesign]

The parking sensors are held in with little plastic brackets that are typically glued / epoxy on or plastic welded but in our case we didn’t have them.

[@onvlader]

Thanks for you reply. For my understanding, the sensors in the bumpers are the ones that activate the airbags In case of impact. I installed the bumper without them and I had the Airbag light on and I couldn't get rid of it until I connected the sensors again. I may be wrong!. Cheers!.

[@Rome5.0]

Link for bumper?

[@officialtjtrev8910]

How much did it cost to paint?

[@PrizmAutoDesign]

$600

[@officialtjtrev8910]

@@PrizmAutoDesign Mp concepts has it for $900 unpainted plus painted 600 so 1500 I5 autohaus has it for 1600 pre painted. U think i should just get it pre painted?

[@PrizmAutoDesign]

@@officialtjtrev8910 I wouldn’t recommend a pre painted bumper. You run the risk of the bumper not matching perfectly. It’s better to take it to a shop, have it fitted and painted.

[@officialtjtrev8910]

@@PrizmAutoDesign Thanks for the reply brotha i went with this one unpainted. Is it primed already ?

[@officialtjtrev8910]

What screws do u need for this bumper. Mine didnt come with hardware unfortunately

[@PrizmAutoDesign]

That is interesting, as it should have. I'd recommend finding some self tappers that are not too long so it does not puncture the body panel through the other side.

[@MenaceLV]

Dude mine didn’t either ! I need to get my hardware asap. Any help !?

[@officialtjtrev8910]

@@MenaceLV I asked customer service they took 3 weeks bc it was out of stock so i went to home depot and bought washers and nails lol

[@MenaceLV]

@@officialtjtrev8910 bro ! What washers and nails ? Did it all fit ? I’m desperate right now

[@officialtjtrev8910]

@@MenaceLV They fit I'll try to find the links online any washers work just not too big size

[@DaBoomClap]

dont buy mp concepts bumpers. i bought a gt350 rear bumper and diffuser kit and it came in warped and some parts of the bumper were broke im getting a refund as i type this, definitely not worth the almost $1000

[@tommyyancy3902]

Stock bumper looks better, imo.

[@mr67gta]

FAKE GT500 sad

[@jondittmar8163]

Don’t confuse changing the style of a car with up-badging. If he had Shelby badges on it, that would be a fake GT500. Nobody throws that bumper on to trick people into thinking it’s a GT500. People that put on fake badges do though

[@PrizmAutoDesign]

Well said!