Thank you so much Sir!! For giving us all the details.
@muratdemir59914 жыл бұрын
Thanks for giving the cods i am so greatful
@lucagioviale4 жыл бұрын
Thank you, this video was very useful
@viniciusaragao20573 жыл бұрын
Is there any function to change any oc channel pulse? I'm getting started in stmcube (sorry for bad english too)
@vivek13394 жыл бұрын
How do you configure the comparator and turn on/off an onboard LED based on the output of the comparator? Thank you so much for all the help
@davidwillian22797 жыл бұрын
Great Video, Explanation is awsome!
@exaltedcodiing66552 жыл бұрын
how to stop output compare clock pulses at only 8 pulses at 4 mhz speed?
@parthshinde59664 жыл бұрын
Extremely Helpful content! I was on search for such use of Timers. Can I use same channels to create Morse Code of "SOS" to display ...- - - ... on LED? I want to do it using General purpose timer.
@mutexembedded22064 жыл бұрын
Hi Parth, Yes if code is periodic
@germanvelardez79473 жыл бұрын
you are the best.
@sarunkumarkp84296 жыл бұрын
Hai, I need to generate a PWM signal for that , 1) I need to compare 10kHZ triangular wave with a sinusoidal wave 2) I need to compare 10kHZ triangular wave with a constant DC signal The PWM i need to generate is combination of above two. I need to add the result of 1 and 2 for obtaining the required PWM. Is it possible to do?
@mutexembedded22066 жыл бұрын
Hi, You can generate a Triangular wave, a Sinusoid and a DC level signal with the STM board. So the answer is Yes, you should be able to do that pretty easily.
@sarunkumarkp84296 жыл бұрын
Thank you. One more thing; how I can able to call both the pwm output and how I can OR these two pwm.
@mutexembedded22066 жыл бұрын
SARUN KUMAR K P Use an external OpAmp adder. Or Implement both in Software.
@sarunkumarkp84296 жыл бұрын
MYaqoobEmbedded Thank you
@mutexembedded22066 жыл бұрын
SARUN KUMAR K P Good Luck Sarun
@swapnilchaudhari65906 жыл бұрын
How to get 1 micro second delay..with timer counter register
@mutexembedded22066 жыл бұрын
swapnil chaudhari Watch tutorial 22, You can use a timer in interrupt mode; set prescalar and period so that the tick is 1 uSec and wait for the interrupt. Or can use the same thing in polling mode, by waiting for Period elapsed flag.