My 4S Pavo 20 - Parts and Settings

Quick run-down of how to make your Pavo 20 a 4S beast.
AIO - shorturl.at/tHJRX
#pavo20 #4s #betafpv

[@mohammadhassanradmehr]

Hello, I bought a Pavo 20. Before installing O3, I was flying with 2-cell and 3-cell batteries without any problem. But after installing O3, it does not fly at all with 2-cell batteries, and with 3-cell batteries, it flies at 90% throttle and with difficulty. where is the problem from ? I have a 2 cell battery : tattu 450mah 75c and a 3 cell battery : boslipo 650mah 95c

[@siumaaam]

Nice Custom build. But i’ve build my own 4s pavo20 got 9 minut cruising and 6 minutes little freestyle with 4s 730mah

[@Mamawsw]

Wich Motors do you use ? And whats your total weight?

[@iashmelev_chan]

Please tell me what motors you use

[@Mde7FPV]

110 grams. Motors are 1105 6000KV from betaflight. But any comparable will do as well.

[@vatsalkonkani]

How about indoor? I am planning one mostly for indoors use , will the 4s be overpowered?

[@Mde7FPV]

For indoors I'd leave it stock

[@vatsalkonkani]

@ stock means bnf version ?

[@Mde7FPV]

@vatsalkonkani yes, the unchanged version, how it comes out off the box

[@vatsalkonkani]

@@Mde7FPV we have no supply for 3s from sellers. Only 2 batteries offered if i buy pavo. So i thought of 4s

[@Mde7FPV]

@vatsalkonkani maybe choose some lower KV motors when using 4S batteries.

Has the DJI air unit 03 not given you overheating problems? For me it disconnects after 2 minutes due to overheating

[@Mde7FPV]

No, that never happened to any of my 03's

[@Juanpg2705]

this may be happening if you are not flying? O3 unit overheats if you have it plugged in to a battery and not flying (like when you are working on the drone settings etc). Usually 1/2 mins and it overheats. If you fly, it is fine

[@fynnwhatever2005]

What is your dry weight? Are you happy with your build? Would you still go for it?

[@Mde7FPV]

Without battery it's 110 grams. Yeah of course. It's tons of fun.

[@CYCOJOE888]

Nice Video my friend 🎉

[@dudydudidam]

How bout flight time using this setup?

[@Mde7FPV]

Depends on style of flying. Probably 4 minutes of cinematic cruising or 2 minutes of racing

[@samidemir2786]

I made your pid settings, but when I put a little pressure on the throttle, there is vibration. Am I doing something wrong with the pid settings?

[@Mde7FPV]

Check for loose screws first. Vibration is 90% due to something is not tighten good

[@samidemir2786]

@@Mde7FPV I constantly check them all, they are tight now, I looked again.

[@SKAIFPV]

Nice work

[@JEPhotodesign]

Has Propwash improved by the 4s setup?

[@Mde7FPV]

You always have to remember, this is not a freestyle quad, it's a cinewhoop. It's in its nature to have propwash when doing tight freestyle tricks. For regular flying or even racing, there is no noticable propwash present with my pavo.

[@JEPhotodesign]

@@Mde7FPV thx

[@larsheller5049]

Did you add a GPS module meanwhile?

[@Mde7FPV]

I can't see why a 2 inch would need that

[@larsheller5049]

@@Mde7FPV I lose the video signal very fast (just a few trees or so, DJI O3). I thought that could help so the drone will not crash due to failsafe. But I am new to that and maybe it wouldn't help.

[@matiascelis3195]

What port do you use to conect elrs?

[@Mde7FPV]

I don't use ELRS, I'm on crossfire and I have it connected to UART 1