My CHEAP 1000HP Corvette ZR1 Build BLEW UP In My Face..

[@RaceProvenMotorsports]

Almost time to party!!!!

[@billynomates920]

you know the corvette is an enthusiast's car when the engine gets a sunroof but the driver doesn't..🤣

[@biglefty08]

Never thought about it like that 😂 just took some photos of a C8 Z06 engine bay and it's so sick

[@0Heeroyuy01]

really its just for the supercharger not the whole engine

[@Theavalanche730]

@@0Heeroyuy01…

[@austindoran9746]

This is my favorite build on KZbin right now

[@Bird_Brain_Dave]

Btw, the easiest way to get a hose over a barb that is really tight is to heat a cup of water extremely hot and dunk the tubing in the hot water for a minute. It will soften the the hose and make it a lot easier to get over the barb.

[@jhalkoski]

zipper wax works really good too

[@christophercrowley6707]

Windex, it's alcohol based. It acts like a glue after install. Slips on, never coming off even after multiple cuts with box cutter

[@CarolinaRealEstateGuide]

Hairsprays works great too

[@christophercrowley6707]

Windex makes push on lines easy, the alcohol in it dries it out and the bond is almost like glue.

[@waynek921]

Nice work team.. 👏

[@andrewbeetz2196]

Good progress! Look forward to seeing this thing goin!

[@christophercrowley6707]

They make 180 degree and 90 degree fittings, bent hose under pressure and spent all that good money on good stuff. I expect this on the juke, but not the ZR1

[@sachafailla]

Another great video from ScrapLifeGarage!!!!! Thank you for cleaning those leafs!!!

[@hindu202]

Fernando's optimism is awesome

[@R3DRUMZ_427]

@scraplife garage Cool knowing my car was used for Synergy Motorsports to mock and make that that trunk tank for the C6. Rick made a custom air to water for my YSI build.

[@DrRick-dq4bb]

It already sounds bad assss. Can't wait until it is running well.

[@concernedcitizen2868]

@ 18:46 i love cars. i love trucks. i love the army. i love my new bourne. i love america. i love all good nice people. How is i am here and you are there. why is it i want to be there working on a piece of history. and why am i here thinking it. it dont really matter huh. Beautiful car keep living the dream working on the dream. Hooah

[@everguardado2605]

You have to bleed the clutch cylinder itself where it has a 10 mm to unlossen it

[@Beesty87]

If there was a time I ever needed Porsche content it’s now

[@akilgoodridge658]

Great job guys. I appreciate the fast response. This progress is well documented. She’ll idle real nice with this setup. Looking forward to the dyno video at RPM via Fran.

[@yudigg7]

8:00 yo the gucci mane ice cream tat on the hand is A1 😂

[@steve3772]

Love the optimism! Keep it up, you'll get there.... so close 👍

[@amandatoland5418]

Love the crew & productivity. Can’t wait to see what happens next

[@Kevf5]

Favorite build series 🔥

[@lancewilliams5726]

its looking good so far, it looks good

[@jaimeedwards1269]

Can you please do a video on how you have upgraded the DSX kit. I think I know how you did the wiring but a video would be nice and what size fuel pump are you running? I'm assuming a 350 LPM. But please do a video

[@crabsstance8499]

can you finish the porsche next

[@ARCarReviews5]

If you hear 00:38 when you start your car throw it away 😂

[@nickwells20]

You just couldn't wipe the dirt off the radiator plastic shroud lol.

[@skylerjones2302]

y’all are definitely my favorite car youtubers, im always watching y’all while on my lunch break

[@kylerpanter]

I don’t suppose you would share the radium fitting part numbers for the 3 other fittings. Im knee deep in the same build and can’t find what im looking for!

[@jhalkoski]

fun fact, two 8-6 fitting plus those two 90* push-lock fitting would have been a good solution for your cross over and would create a smoother fuel flow.

[@roberthandy9420]

Can’t wait to hear it running love that car hell love all vettes 😂

[@BamBamsflow]

You might need a bore scope camera it would probably helped see if the pressure sensor was plugged or kinked. Good Luck

[@russelbarns1737]

great video lee...always entertaining!

[@everguardado2605]

I had similar problem on a Honda Civic

[@trentdawg2832]

Do you guys have any mercedes inventory?? CLS550 seats to be exact??

[@bigsquatchsasfoot1964]

Damn dude that thing sounds meaner than my wife …and that’s an an amazing accomplishment 😂😂 you certainly know your vets …impressive 👍

[@hvac42long1]

Is there not an aluminum plate that covers the torque tube and adds rigidity? Other than dirt is there any disadvantages to leaving out that plate?

[@grantr6317]

Just found this channel and I am really liking how gritty it is. New Subscriber looking forward to your next video

[@swaggs0099-mc9sm]

So you're saying your Covette's a lemon now?

[@armandopatane5343]

Exclent job

[@r3d1911]

That's a sick ass Vette build only thing I could say is the car needs to be lowered a tad all around..

[@jonreaves6646]

I looked for yall at tx2k, unfortunately our paths didn't cross

[@JD-cc3tz]

Sounds nasty man can’t wait to see it running.

[@armandopatane5343]

Yes = do the right way

[@Yowmop]

Tezzy wagon with the xe30 rims tho 😏

[@NeverLiftYT]

nice job fellas!

[@BeastEChad]

Yay corvette video🎉

[@jeffreya-bomb7313]

Quite a few "that's what she said" moments!

[@kolliinn]

I LOVE NISSAN JUKES❤

[@6556cody]

Brotha, very happy for you but had no doubts due to the character you always have been hahahahaha you guys have built a great channel in no time!

[@preloudeslight7462]

I love corvette 🇬🇷

[@christophercrowley6707]

In future clean each part before install, quick detailer and a rag is your friend at a minimum

[@PaddyBoy644]

Did I miss the part about putting oil in the transmission?

[@BuildTheSandbox]

What else is better on car youtube than a horribly short self imposed deadline? Nothing

[@RickheadWashington]

But where did all the brake fluid from the original clutch master cylinder go? It had to go somewhere......

[@retrobear9367]

I'm sorry. I hear Kong and all I can think of are those dog toys lol

[@RickheadWashington]

While you are working under the hood with radiators, fuel, clutch fluid, wiring, etc why not remove the hood? Just so you don't mess up the hood? Or because it's hard to line back up? It's not as in the way as one that opens the normal way I suppose.

[@MrOkieDude]

What is the GM color code for this car?

[@mac9955]

Bet the PCM and ECM needs to be flashed.

[@Orbacron]

Whoops, manufacturers recommended oil weight is a joke nowdays

[@CYANOUTGUN15]

Is there a another episode for the demon??🤔

[@mymad5558]

Damn that sucks. You should donate that lsa to my nomad. I

[@mymad5558]

Also clutch bleed technique Leave the pedal pressed to the floor overnight to get the last air bubbles out. Like they hold the brake pedal down during alignments

[@tomar646]

Hey i think i found nice set of tires for you in my area demon branded very rare... Let me know if you interested so I can send you a link to it

[@machalothomas3492]

Where is the Manual demon project 👀 it's been 3 weeks🤔

[@scraplifegarage]

Parts take time unfortunately!

[@devingrilz6693]

Got the Gucci mane ice cream tattoo BURRRR

[@scraplifegarage]

BRR

[@landmarkboulders6226]

Clickbait smh

[@KRmotorsports]

Dude clean the parts and the engine etc etc

[@oonwing]

❤❤❤❤❤❤

[@chesspiece81]

Difference between a 1k HP C6 ZR1 and a Nissan Juke? The Juke starts, runs, has oil pressure, and at the end of this video is faster. So does a Nissan Juke really suck THAT BAD??

[@scraplifegarage]

Solid logic!

[@chesspiece81]

@ScrapLife Garage this is why I enjoy this channel so much. The trash talking flows so freely and makes the little community here seem like a bunch of friends having a beer talking shit.

[@scraplifedalt]

@@chesspiece81 you Jinxed me!!! the Juke battery crapped out on my in this morning. Lol

[@chesspiece81]

@@scraplifedalt so does that make a Juke a POS?

[@scraplifedalt]

@@chesspiece81 I mean, I’ll fix it before carrington gets this turd zr1 running properly 😁

[@kevinkobayashi]

i just "noticed' one or two tires are bald

[@wlanceg]

First one for once!!

[@billynomates920]

[@Cristian8767]

Guys, this was supposed to be an awesome ending to this video. And now it's snot. :))

[@gsfriendlytreesmmj1165]

What's up with the random tattoos. They all look hi quality but so random. They remind me of the wall advertisement at an old-school tattoo parlor. No disrespect meant just an honest question. You guys are doing an amazing job with the channel. Much love brother

[@scraplifegarage]

That’s exactly what they are, random tattoos. I feel like getting one? I go get it. It’s a representation of who I am. No plan, no big cohesive ordeal.

[@Bird_Brain_Dave]

I hate Nissan jukes forever!

[@ericcaisse791]

Its a Zr1 owning it is a win Rome wasnt built in a day. The end funny Af

[@concernedcitizen2868]

none deployed veteran that has been disabled for many years. can i come work for you ? havent worked in many years. I feel like i would be great help

[@colchronic]

Oh fuck You should have told me you were in Baytown I would have bought you a drink I live literally 20 minutes from that soon to be demolished drag strip

[@ah4800]

Cheap? Those are $130k in canada

[@life_wide_open6416]

1:19

[@Alanari_]

ok so when did it blow up lol.

[@akruffneck47]

I still hate Nissan jukes

[@hynev9720]

Btw the title is clickbait it never blew up in the video if your looking for that part

[@robphilip1646]

So how much $$ did u spend on this shit box 🤣

[@StarGuardian8180]

Cheap and 1000HP don't go together

[@hanzyj7021]

Do not start that car with no coolant bro…..

[@ARCarReviews5]

First 🎉

[@jonsmith6496]

Nope

[@Woza3.8]

Can you tell the car to not look in the mirror than it will not blow up see I'm smart

[@daveunbranded]

What are you talking about. My computer was fine in Y2K. Boomer

[@jpman9795]

Ok, first of all, No decent shape C6-C7 ZR1 is cheap. The damn C6's are going for $120k. The C7's ZR1 are $180k. Nothin cheap about them.😅😅😅

[@ltsgarage7898]

You know, why don’t you clean that intercooler shroud before you put in together…

[@Thedoug369]

Clickbait city here. 😴

[@juniorperez4107]

this guys has money and is spending money on mods and the one one mod he can’t buy is driver mod ! prove me wrong take your zr1 or z06c6 stock to the 1/4 mile and see what times u get before u mod it !!! pay me i’ll teach you how race it

[@trpreston90]

FIRST

[@jonsmith6496]

Nope

[@mustangjunk6013]

First at selling a viper? First at not brushing your hair?

[@generiley355]

The clutch slave failure is a common thing on all Corvettes......

[@islandRT]

John 3:3-Verily, verily, I say unto thee, except a man be born again, he cannot see the kingdom of God. John 3:7- Marvel not that I said unto thee, Ye must be born again. John 3:16-For God so loved the world, that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life. ✝️🤍

[@JJsAutomotive]

I am cuckoo-for-cocoa-puffs for ScrapLife Garage. Simple.