hello! with sabrent ssd do you get any high pitched noise or whine? thanks
@be_shoichi2 жыл бұрын
Hey, I've actually noticed that but thought that's an issue only with my SSD... Is this actually a thing? Do you know how to solve this?
@oliverqiu_2 жыл бұрын
@@be_shoichi Hi! I just got my mount and enclosure yes I definitely have noticeable high pitched whine when in use - I'm messaging with Dark Power Laboratory now
@be_shoichi2 жыл бұрын
@@oliverqiu_ Would be great if you can share what they say. Since the noise is coming from the SSD itself, it might be a problem with Sabrent (or any of the non-Sigma-recommended) SSDs.
@oliverqiu_2 жыл бұрын
@@be_shoichi so the issue is with the pressure on the ssd from the blue thermal pad in the ssd case - if you take the case off or remove the blue pad there is no noise we don't know if this is a Sabrent issue or with the ssd controller, maybe different thermal pad too, hope this helps! i shoot indoors mostly so I will use it without the thermal pad
@be_shoichi2 жыл бұрын
@@oliverqiu_ IT WORKED! Now I can barely hear the high-pitch noise after removing the thermal pad. I will pin this comment since it should be a common issue for all. If I come across any side effects down the road like overheating, I will report back. Thanks for highlighting this!
@SuchetB7 ай бұрын
This is very similar to the way i set mne up - I use a sabrent 2TB ssd with the enclosure from Dark power labs - Love it.
@tovopro10 ай бұрын
Thank you for this video. I just bought a Sigma FP, and have been trying to figure out if they made a gimble for it. Also an SSD mount. You saved me so much time and money with this video! =)
@HuiYue3 жыл бұрын
What a good SSD rack making a non-cable setup! Thank you for your video!
@birdandinsect2 жыл бұрын
衝撃的な小ささ。。!! 天才です!!!
@johnb.7812 Жыл бұрын
Hi! I was so excited to see we have the same lens, rack, and camera body. Have found a follow focus solution for your summicron?
@be_shoichi Жыл бұрын
That's quite a coincidence - hope you're having fun with it! I haven't really tried or researched about follow focus for Summicron but I guess the only way to remedy the focus tab is to 3D print a focus ring like this one? www.ducloslenses.com/blogs/cinemodjournal/notch
@johnb.7812 Жыл бұрын
@@be_shoichi thanks for the link man. Much appreciated!
@akyerit2 жыл бұрын
Awww should have showed the footage from that setup!
@p.a.dconstructionltd41392 жыл бұрын
Subbed just for that ssd hack man!! Fantastic thought.
@EUGEN_VIDEO2 жыл бұрын
Good evening friend! Your system proved itself and all works well in 12 bit rav in 4k?
@be_shoichi2 жыл бұрын
Yep. I've been recording mostly in that setting and don't see any issue so far.
@ZeroPurpleRansom2 жыл бұрын
How do you deal with the focus when youre using it with that gimbal??
@be_shoichi2 жыл бұрын
I usually do my best not to pull focus while recording. That is by planning my shots in advance and maintaining the distance from the subject, and using higher aperture like F8~ wherever possible. By no means it's desirable, but personally a reasonable tradeoff for the compactness of the setup!
@TheWholePicture2 жыл бұрын
Great video! Thank you so much for sharing it's gotten me interested in the FP again!
@motebike2 жыл бұрын
I have the FP L. Nothing else compares to the FP/FPL. Image and colours are amazing for stills and video. Unfortunately the LCD, battery life and auto-focus are deal breakers and that is why am selling it.
@be_shoichi2 жыл бұрын
Totally agree! It's definitely a love and hate camera haha
@vbeniii94 Жыл бұрын
Is the autofocus that bad on the fp?
@motebike Жыл бұрын
@@vbeniii94 For normal non-action photography it's fine. Other than that it's not inspiring to use autofocus. There's always manual focus :)
@axeffect22937 ай бұрын
Hey! I've been coming back to your family vlog and channel for years now! I'm going to be implementing the same setup! So i had a question for you. For focusing do you have a large depth of field and then move with the subject for maintaining focus?
@be_shoichi7 ай бұрын
Wow, thanks for sticking around! Basically yes, I tend to use F8-11 and auto ISO in the daytime. That will allow most subjects within the room's distance to stay in focus. At night I gotta lower it to F2-4 so the strategy would be to shoot more static shots.
@jmssun2 жыл бұрын
What a beautiful setup!
@jmssun Жыл бұрын
2:45 I wonder why don’t you attach your Voigtlander viewfinder on this SSD rack in your video? Since this setup will make it much easier to take the viewfinder down
@be_shoichi Жыл бұрын
Yeah, that's a valid option too! I just prefered the look over practicality a bit this time 😉
Did you try very long recordings on that ssd? Thanks
@be_shoichi2 жыл бұрын
I just tried for 40 minutes - the SSD became pretty hot but it didn't stop recording.
@question12002 жыл бұрын
@@be_shoichi thanks.
@mattsiiteri43662 жыл бұрын
Great video! Does the sabrent ssd allow you to record in 4k 12 bit?
@be_shoichi2 жыл бұрын
Thanks! And yes it does :)
@artistdq Жыл бұрын
Dope! What lens is on this camera?
@be_shoichi Жыл бұрын
Leica Summicron 35mm F2!
@sheldonnorton90352 жыл бұрын
Amazing
@andrew_nayes Жыл бұрын
5:04 Apparently, the Crane M2 has a weight limit of 720g. Does it still work fine with 755g? What would you say is the actual limit? Have you tested any heavier lenses?
@be_shoichi Жыл бұрын
I've now switched to a lighter
@andrew_nayes Жыл бұрын
@@be_shoichi Good to know! Thanks!
@djrWkdakal5 ай бұрын
오호라 좋네요
@steveteare38652 жыл бұрын
Thanks for this. Have you found the 2TB drive to be reliable?
@be_shoichi2 жыл бұрын
Mostly fine, but in Cine mode I sometimes face an error where the recording will stop after the first ~5 seconds. Not sure if it is due to the drive or the USB-C dongle but does mildly affect the workflow.
@한내-o3z2 жыл бұрын
how could you control focus?
@be_shoichi2 жыл бұрын
I directly access the focus ring if I need to - although I try to avoid that by using a higher aperture or keeping the distance with the subject static.
@omichalek2 жыл бұрын
What a cool setup @@be_shoichi! Do you try to avoid focusing because it would interfere with the gimbal movements or is it because it would be hard to see on the display?
@be_shoichi2 жыл бұрын
@@omichalek For me it's the first reason!
@edwardrobison36842 жыл бұрын
Great setup! I have been using the Samsung T5 ssd, but have been looking for a more compact ssd setup for gimbal work. Gonna give this a try. I also use the voigtlander 35 f/2 and 40 1.2 with m to L mount adapters. The 12 but footage from the FP is spectacular!
@be_shoichi2 жыл бұрын
Thanks, and love the lens choices! Recently they made a "lite" version of the SSD holder that is even more compact by eliminating the cold shoe mount. I am using that now, and liking it as much as the one in this video. Also just wanted to highlight that some of us experienced noise while recording with the Sabrent SSD. Troubleshoot is in the pinned comment in case similar happens to you.
Curious if you've tried this setup with a Seemo or monitor. If it can handle the weight
@be_shoichi Жыл бұрын
No I haven't, but probably the payload won't allow you to mount it on the camera body, so the likely scenario is to mount it on the side of the gimbal.
@EUGEN_VIDEO2 жыл бұрын
Hello! When I start recording or playback, I get a squeaking sound... Have you ever had that?
@be_shoichi2 жыл бұрын
I did and solved by removing the blue thermal pad inside the SSD case.
@EUGEN_VIDEO2 жыл бұрын
@@be_shoichi May I ask where she is? And doesn't it interfere with the overheat protection?
@be_shoichi2 жыл бұрын
@@EUGEN_VIDEO It's glued behind the lid of the case. It does heat up quite a bit but I haven't experienced any performance issues so far.
@EUGEN_VIDEO2 жыл бұрын
@@be_shoichi You mean where on top, the black label with white letters and 2 blue stripes? I tried it but the chirpiness of my ssd didn't decrease much. Will these sounds go into the recording inside the camera?) To be honest I'm worried about it)
@EUGEN_VIDEO2 жыл бұрын
@@be_shoichi Do you have something similar and how do you deal with it?
@nomadmongol2 жыл бұрын
Splendid!
@abiogful2 жыл бұрын
Did you ever have any issues with the SSD freezing? It only works for me on FHD, not UHD. Not sure if it makes a difference that I'm on the normal FP, not FP L.
@00chilli002 жыл бұрын
What ssd are you using , it might also be the cable you are using?
@be_shoichi2 жыл бұрын
Assuming that you are talking about this Dark Lab SSD setup specifically, I do sometimes experience a recording error-the recording would stop after few seconds in UHD. For me the issue occurs infrequently enough (maybe 1 in 10 recording or so) so not too critical, but not sure for others' cases.
@lekha822 жыл бұрын
@@be_shoichi I had it with T7 only when 29.97fps 12bit 4k is used
@scot-johnson Жыл бұрын
What's the auto focus like with that camera?
@be_shoichi Жыл бұрын
Very bad! Takes seconds or even fails to focus.
@noverdeamarillo4 ай бұрын
test fotage?
@be_shoichi4 ай бұрын
Basically all my vlogs are shot with this setup!
@sheldonnorton90352 жыл бұрын
If had you showed me that in the year 2000 I would’ve dropped to the pavement and fainted.
@be_shoichi2 жыл бұрын
Firstly, get yourself a 2TB SSD... * faint *
@ireto-p1c3 жыл бұрын
今回もいい!
@antonioau722 жыл бұрын
神様〜
@comicaditya2 жыл бұрын
How is this ssd rack with the case?
@be_shoichi2 жыл бұрын
What case are we talking about here?
@comicaditya2 жыл бұрын
@@be_shoichi The Dark Power Laboratory SSD case and the attachment on the side
@ericcoen88942 жыл бұрын
what’s the payload of M2?
@be_shoichi2 жыл бұрын
It's 720 grams as per spec sheet.
@michaelbruchas66632 жыл бұрын
Captions might help…
@alancalvitti2 жыл бұрын
can’t use w evf
@be_shoichi2 жыл бұрын
Nope
@EUGEN_VIDEO Жыл бұрын
This thing is still making noise and I can't figure out how to solve this problem. The manufacturer sent me a box under the ssd 3 times andn. I already bought a stabilizer and lens, but I couldn't shoot because of this noise.
@be_shoichi Жыл бұрын
Sorry to hear that. One viewer was guessing that the noise is coming from the SSD and not the enclosure box. As far as my study goes, the sound can be prevented by two ways. 1) The hardware way. Physically change the pressure on the SSD. Some of us have found that removing the blue thermal pad inside the case would change the pressure against the SSD which results in less noise resonation. But there must be room for more experiments. 2) The software way. Change the recording setting. Say if you are recording in UHD 8-bit, try something else like FHD 12-bit just to see how the noise profile changes. Basically, different workloads create different patterns of currents passing the coil, and some settings might have significantly less noise resonation than others. If neither of above work, the last resort is to remove the noise in post. If you are using DaVinci, this is achievable by muting certain sound frequencies in the EQ tool. There are many KZbin tutorials on this as well. Anyhow, the moral of the story is that there isn't much support for these kind of enthusiast gadgets and hacks, so we need to understand the risk factors, and enjoy the ride :)