My Crazy Built 1986 Honda TRX70!

[@SupaNami]

That thing is awesome!! Well done Rakow!!

[@JelenService]

AMAZING TRX! Very good channel, great video quality, great performance I WANT MORE!

[@user-mb8nb8dj8y]

My wife has a factory original and I have a big bore but it isn’t enough been really looking at one of these 140s.

[@rakowsrebuilds]

James Newby the 140 has a good amount of power!

[@doubleg1328]

Sweet build and great video, I may have to pick up one of those Honda hats too! With that Mikuni VM26-606 carb the "choke" is more of an enrichment plunger so you are doing it right by raising the idle speed when cold. Basically, turn idle screw up 1/4 - 1/2 turn, pull with the choke on until it just fires. (1-2 pulls) then close the choke plunger immediately. Once warmed up return idle screw back to where it was. I find the stock VM26 jetting (21.5 Pilot, 190 main) too rich for even my built up 150cc motor. You will likely see a lot of black soot buildup on the base threads of your spark plug indicating this. Try a 175 - 180 main jet on the 140cc and if you have an off throttle bog (very likely) dropping to a 18.5 pilot will greatly help to lean out the transition carb circuit improving the part throttle response. This is why you are able to start without the "choke" and only raising the idle screw as the low speed pilot jet is so rich. A smaller pilot jet will also lean out the idle circuit a little bit which is fine as you can see the overly rich black smoke exiting the muffler when revving with the stock carb jetting. Just note with a smaller pilot jet you will likely need a quick hit of the choke plunger to get fired but overall engine performance should be more responsive and the spark plug will not get so black.

[@WadeShoot]

Amazing TRX I love It :) I have to twin to restore

[@andrewraymond6223]

Well done. This thing looks bad ass.

[@corbinslaamot6973]

I’m putting a ssr 110 in a Trx 70 love the vid

[@marqmarlon3525]

When I seen the list…I liked commented and subscribed

[@dbelflower6793]

Thing sounds dope with headphones on.

[@TheImtoomuch]

That's awesome!

[@Gasolineworld]

1:35 wish i could do that with my voice

[@rakowsrebuilds]

Mo-bamba mode · 81 years ago didn’t even notice that! Haha

[@52darkhorse]

The video was great! Keep them coming!

[@rakowsrebuilds]

Ill be posting a PT3 for sammy’s trx70 build this coming weekend

[@52darkhorse]

Awesome! I need to do a series on my 70! I also have a few z50's I could through in there also.

[@rakowsrebuilds]

Mini-Bike Adventures im doing an 85 atc70 build after this!

[@laamor99]

Rakow’s Rebuilds Informative video and awesome bike build! How fast does your bike go? Do you think a Piranha 190cc or 212cc would fit? Thanks

[@rakowsrebuilds]

I would think they would fit in the frame. I just know you’d have to make a custom mount for the cooler

[@calebproductions5970]

Just amazing nice quad

[@hondamanatc4life983]

Sweet I just got a trx70 I'm building it

[@zinaantolin3454]

Did you need spacers and longer bolts to use the oem foot pegs?

[@jtothefx]

Beauty!

[@Libertymongoose420]

Nice restomod looks cool

[@JTHAMMER12]

Do these tires need inner tubes? I’m looking to rebuild mine

[@jordananderson2032]

Where can I get those rims and tiress

[@laamor99]

Beautiful bike. How fast do you think you can go with the 140?

[@michaelswift2822]

What did you do for rear brakes? I dont see a foot lever, and I am starting the same type of build. Thanks

[@rakowsrebuilds]

Since this is an 86. The breaks are on the handlebars (front and rear). But with this motor being a manual, I didn’t put in the front breaks, and just had the rear breaks hooked up along with the clutch lever.

[@scott3816]

Awesome trx

[@Cunderpants]

Still have this?

[@JTHAMMER12]

Do these tires require inner tubes?

[@kreedkustoms859]

nice build

[@kenfetters8731]

Very cool

[@jordon7813]

I have one of these but it won’t start because the spark plug wasn’t fully in and someone messed around when it wasn’t right in can you help the spark plug won’t go in fully

[@joebrito3192]

your threads might of gotten stripped if someone went riding without it fully tightened down you might have to pull your engine and get it re-threaded thats just my guess

[@James79561]

Really nice .

[@andrewwoodward6560]

It looks good ! 👍Never find these where I live, thankfully I picked up a ATC 70 almost 20 years ago and hung on to it. Gave it to my son for Christmas last year !

[@davidpayne2469]

Restored my 85 125trx over the summer working on my 81 250r now

[@andrewwoodward6560]

Very nice, I love the look of the first gens ! 👍

[@davidpayne2469]

@@andrewwoodward6560 me to and my 10 and 13 year old love riding it

[@antonyamb2118]

Does the 140 just drop in or do you have to fab any motor mounts?

[@rakowsrebuilds]

Drops right it

[@antonyamb2118]

@@rakowsrebuilds think I might needa start a build of my own with the trx70 rotting in my grandparents garage🤔

[@jessespahn4495]

I know this is an old video but when you got it was it running I have one and has no spark and want moter swap it but if it's worth something I'll sell it

[@rakowsrebuilds]

My stock motor in it was junk, so I planned on swapping it with this motor and runs great!

[@laamor99]

@@rakowsrebuilds What’s the top speed?

[@joshuacollins662]

How much u want for it.?? 3302324437 lmk. Txt

[@anayal8tr130]

Joshua Collins I have one also how much you offering

[@keithwilliams5121]

I want buy one

[@davidnino111]

No rear brake?

[@rakowsrebuilds]

Has rear breaks, got rid of the front breaks cause I have to put a clutch lever on

[@seanmccluney3975]

Did the new carb make it run faster?

[@rakowsrebuilds]

I didn’t try it with the stock carb. I did some research on the motor and people said to put the vm26 to make it run better

[@501kyronmuddeep6]

It’s scary being on something that fast and that small it’s not enough to hold on to I’ve be on things that was fast and small and it’s pretty scary so I know how yo feel😁 @kjezy3x