My Disassembly/Maintenance Kit with the ZT 0562TI

As frequently requested... Here is everything I use to disassemble, maintain and clean my knives. Not the sharpening stuff. I'll do that eventually. Someday... And OH! The inside of the Zero Tolerance 0562 TI!
My Stuff
Mat - www.amazon.com...
Wiha Tools - www.wihatools.com
KPL - www.knifepivotl...
Nano Oil - www.nano-oil.com/
Aegis EDCi - aegissolutions...
Blue Loctite Stick - www.amazon.com...
Make sure to visit White Mountain Knives at www.whitemounta... and use the discount code SDWMK at checkout for 10% off!
If you enjoy these videos and want to see more, please support us on Patreon at / sliceydicey Thanks in advance.
Check out the Slicey Dicey Podcast at / sliceydiceypodcast
Check me out on Instagram @sliceydicey75 and Facebook at / sliceydicey75
Email me at [e-mail]
#sliceydicey #knifereview #edc
If you want to contact me the old-fashioned way or send stuff for me to review, my address is…
Slicey Dicey
PO Box 18672
Rochester, NY 14618

[@OhioConcealed]

Thanks for sharing the knife care tips and tools. ZT 0562TI looks like a very nice knife.

[@SteveKluver]

Thanks Bryan. Some great kit there! I always advise newer knife dis-assemblers, to use the 4mm drive bits. Which by default, have then using smaller driver handles. Which in turn gives them less grip, when putting teeny tiny screws back into the knife. Their #1 issue, when putting knives back together with 1/4" driven bits, and larger bit drivers. Is stripped screws. : - )

[@wadepage7809]

Knice video. I love the 0562 design enough that I picked up both the CF version and the Black Ti murdered version.

[@MattH-wg7ou]

I too love the design. Love my 0562CF. Had one, gave it to a friend and missed it so much I got another one.

[@paulrayl9470]

Great video, bro. I've got to get me some of that EDCI. And one of those mats. I'm a little ocd about where and how I put stuff when I'm doing my knife maintenance. Most of what I use is about the same.

[@SliceyDicey]

They’re great. And for like $10.

[@dewarner12]

Thanks for doing this video. It was really helpful both in terms of technique and what products to use.

[@magnusnordstrom9594]

This video was really educational for me, since i also have a 0562ti and was curious to take it apart.... need to get som KPL i think, to try something else than WD40.... I really dig you don´t do "retakes", hop i the video. Thanks ALOT!

[@davidh0159]

I'm slowly collecting the proper tools. thanks for the insight into what I still need to get (besides the knife). :)

[@zachstuff]

Have most of your tools, but the EDCi is something I need to get ASAP!!!

[@nebulamask81]

I really like my little stubby wiha 09BO700 that holds the bits in the handle for more stubborn screws.

[@SliceyDicey]

I've had one of those in my Amazon cart for like a year lol

[@aalbino8636]

Grease on bearings 🤔. Hope you had a good Christmas Bryan best of luck in the new year!!

[@SliceyDicey]

CONTROVERSY!!! lol

[@bionick4281]

Great video Brian, I appreciate the cleaning tips! Ive been waiting for one someone that I follow to do a knife maintenance video! I’ve been wondering what are the best cleaning products to buy for knife maintenance, now I know, 👍🏻!

[@Keith_the_knife_freak]

Follow Nick Shabazz... he takes apart every knife he gets ....

[@paulrayl9470]

I have occasionally used 3 in 1 oil to breath life back into G10 but from the looks of it the mineral oil does a better job of it.

[@rRaden100]

Nanch precision driver with Wiha bits is what I use. Just based off of what I’ve seen it’s better than the ifixit

[@SliceyDicey]

I’ll check that out!

[@goppledanger]

I've recently learned that there is a large black market for these knockoffs/fakes and in my research have found that some ways to distinguish real from fake is the steel insert on the release and the different bolt sizes on the body vs the one on the clip. Are there any other tips you may have?

[@chesterbateman1753]

Thank you!

[@Keith_the_knife_freak]

Nice job !!! Thanks

[@stevesandborn8119]

I have a 0562cf and I cannot break loose the pivot to save my life. Any suggestions because I really don't want to mail it in.

[@SV_Wilko-1KCClub]

Free spinning pivot - Get a t8 on each side and gentle crack it loose

[@40calib]

Smells like a donkey’s ass had me crying 😂

[@xXBallistic82Xx]

I bought the cf version. I have no idea why they didn't skeletinize the steel liner. I may have to skeletinize it my self.

[@Joker-yb6ks]

Bro blade cmp 20,how much bro buy

[@michaelp.139]

Nice kit

[@braidyfisher]

Nice Johnny Dangerously reference. :D

[@SliceyDicey]

Was totally accidental.

[@jt7966]

Whats your experience with bearing wearing off titanium?

[@Tom-uj4uf]

You should probably at least watch the whole video before you go writing this question on every 0562 video on YT

[@glockmeister26]

Cool thx

[@andyllake7482]

「コンテンツを調整する必要があります」、