My DIY Ceramic Phono Stage (Turntable Preamplifier)

[@samanhaqiqian7314]

Hello, can't the ceramic cartridge be connected directly to the aux amplifier? Does it have to have an amplifier circuit? My gram is an old BSR, and it has a direct connection to the amplifier.

[@Woodys_Hobbies]

You can but the sound is thin more on high.

[@minibona]

Great job! Can you provide the schematics of the preamplifier?

[@Woodys_Hobbies]

👍👍👍

[@Woodys_Hobbies]

Here's the diagram buddy just check this. This diagram can be modified anytime. kzbin.info/www/bejne/f5DLk419qM6hfNU

[@krish6729]

Wow! Sounds great. 👍

[@vinyladict8264]

@@Woodys_Hobbies the video not exists u_u

[@Woodys_Hobbies]

@@vinyladict8264 kzbin.info/www/bejne/iXmaoph9id56o6c

[@vinilplay]

Hello! congratulations for the video. I would like to do the same for magnetic, do you have the diagram for magnetic? Grateful.

[@Woodys_Hobbies]

For now I don't have video. But I will make in the future for MM. Stay tuned thanks.

[@EsotericArctos]

Moving Magnet cartridges just use a standard RIAA phono pre-amp. You can find DIY circuits online, but honestly, you can buy them ready made from China cheaper than the DIYing. The DIY versions definitely don't sound any better than the cheap end premade ones and rhe premade ones come in a nice case. That said, you could also by a cheap integrated amplifier that already has Phono input onboard.

[@pepsodenttube]

Will it work if i connect it directly to small speaker say 2 or five watts?

[@Woodys_Hobbies]

No this is a preamp needs to connect to amplifier.

[@pepsodenttube]

@@Woodys_Hobbies thanks for the reply, more power to your channel

[@Woodys_Hobbies]

@@pepsodenttube Welcome!!! Here's my new video with schematic diagram kzbin.info/www/bejne/iXmaoph9id56o6c Hope this will help you if like to assemble a ceramic phono stage.

[@larryshaver3568]

what is that part with three leads near one side of the board?

[@Woodys_Hobbies]

Check this link kzbin.info/www/bejne/iXmaoph9id56o6c

[@mumskamol]

Please share the schematic diagram

[@Woodys_Hobbies]

Sure here is the link kzbin.info/www/bejne/iXmaoph9id56o6c

[@larryshaver3568]

what kind of drill is that? i'd like to find one of those

[@Woodys_Hobbies]

It's a mini drill

[@larryshaver3568]

is this a stereo or mono preamp?

[@Woodys_Hobbies]

stereo

[@MatteoM1990]

With this circuit i can use the output of those ceramic pickup on a simple aux/line input, right ? Because the modern active speakers/receivers dont match the impedance of ceramic and they will work good on magnetic, but sound horrible on ceramic.

[@Woodys_Hobbies]

Yes you can connect this directly to aux or line in.

[@EsotericArctos]

I feel people over complicate this process. A Ceramic Cartridge, if going into a high impedance input, will not really need RIAA equalisation. But you can also push a Ceramic directly into a MM Phone Stage with 2 components. 2 Capacitors, one for each channel in line with the input. If you want to get a but fancier, 4 components, 2 resistors and to capacitors. I don't know why people feel the need to over complicate a ceramic cartridge

[@Woodys_Hobbies]

In every turntable cartridges their is always a match for it. Your idea is good. But if you want a nice out come then use a ceramic phono stage. Ceramic cartridge need a single stage amplification. While MM needs 2 stages amplification or more.

[@Woodys_Hobbies]

You can directly plug the ceramic cartridge in auxillary input sound will come out but too shallow while MM not

[@randybenitosandreajimenez6903]

Is a posible you provide the components I don´t undestand the diagrams

[@Woodys_Hobbies]

Sorry schematic diagram is the simplest form.

[@smitapatil2228]

कंपोनंत के व्यालू नाही दिखाये,फिर कैसे बनानेका.

[@Woodys_Hobbies]

Check here 👉 kzbin.info/www/bejne/iXmaoph9id56o6c

[@electronicshub1555]

Sir magnetic cartedge phono priamp carquit diy video

[@Woodys_Hobbies]

yes sir

[@electronicshub1555]

@@Woodys_Hobbies Wait your video sir

[@Woodys_Hobbies]

@@electronicshub1555 Yes sure you want the schematic diagram I will share it. Im working on it.

[@Woodys_Hobbies]

@@electronicshub1555 Please check this link kzbin.info/www/bejne/morLp2OHjracmdE and stay update to my channel more schematic diagram to be uploaded soon. thanks.

[@bihunscoovlog4104]

Ada dalam bahasa Indonesia ny ga mas

[@Woodys_Hobbies]

no sir I'm in the Philippines