My Endgame Keyboard | Modded Wooting 60HE

Рет қаралды 143,483

Күн бұрын

Пікірлер: 226

@Jaeky 10 ай бұрын

Hello everyone, I appreciate your interest in the modifications I made to my Wooting 60HE keyboard! I'd like to address a common misconception about the switches I swapped in the video. The Gateron Magnetic Orange switches I used as replacements for the stock L60 Lekker switches are indeed compatible with and support the analog features of the Wooting keyboard. In fact, Gateron is the manufacturer behind the Lekker switches originally installed in the Wooting keyboard, so the essential analog functionalities-such as customizable actuation points, rapid triggering, and the magnetic hall effect-remain fully operational with these switches. One of the few noticeable differences between the Gateron Orange switches and the Lekker switches lies in the spring tension, with the Gateron Oranges having slightly lighter springs. Some have also mentioned that the Gateron Orange switches are limited to 0.4mm Rapid Trigger. This distinction doesn't impede or alter the analog capabilities of the keyboard in any significant way. The core technology enabling analog functionality in the Wooting keyboard is inherent to both the Gateron Orange and the Lekker switches, ensuring seamless compatibility and operation. Therefore, despite the switch replacement, the Wooting's analog features, which many of us appreciate for its precision and versatility, are retained and fully functional. Your interest and engagement mean a lot-thank you for watching!

@ovroc 8 ай бұрын

i was gonna go with the lekker L45s and just lube them myself.. what do u think?

@MaZEEZaM 5 ай бұрын

the sound is much better, kind of dampened. My ideal keyboard would be silent or very close to silent.

@Zyge1017 Ай бұрын

Ur video looks horrible

@ikeachair517 10 ай бұрын

does this camera angle make anyone else uncomfortable or is it just me

@TheNuclearBolton Ай бұрын

this camera angle makes me feel extremely comfortable… it feels cozy

@GiatoSama Ай бұрын

It didn’t at first but now that I’m paying attention to it. It does 💀

@voltenbolt Ай бұрын

yes its tilted a little too much forward

@aiheki Ай бұрын

Makes me feel like I'm on a 90+ degrees roller coaster drop which makes me a bit dizzy tbf

@timoleary5815 Ай бұрын

Enough to make me stop watching and block the channel, so yes its really irritating.

@KowaluhYT 10 ай бұрын

Fun fact: Everytime he makes a cut in the video you can slowly hear him dying each time little by little 🥰

@poosch 8 ай бұрын

what?

@aro4439 8 ай бұрын

Wtf

@nxquel 10 ай бұрын

this is a work of art. great job dude, sound is fucking so good

@sildsilly1167 8 ай бұрын

hi, I just wanted to ask, when you swap out the switches, does the wooting still keep is extremely fast actuation speed? I’m thinking of getting the wooting and modding it since I actually want it to sound good while also being good for gaming. edit: I know it’s stated in the pin comment but I just wanted to double check 😅

@PhucHoang-qf6bp 10 ай бұрын

Hi, i just want to ask did you re-lubed the stabilizers? or you just wiped out the old grease and added new dielectric grease? did you use Krytox 205 or something else? BTW great video man, gained a sub from me!

@Jaeky 10 ай бұрын

Didn't relube, just wiped and regreased the bars with dielectric grease.

@mistermistero652 8 ай бұрын

I have actually found lubing the switches in the places where films would normally go, helps tremendously with the weird clicky sound that the stock l60s make when letting go ofthe key quickly

@arkaneforyou 8 ай бұрын

beautiful keycap selection and amazing full white build. I just love clean white builds they feel much more elegant compared to any other color scheme

@Arjeee 9 ай бұрын

it becomes a custom keyboard the moment you put creative intention into it !!!

@Arjeee 9 ай бұрын

from my perspective this looks like a custom board? all you kept was the pcb lol

@sxcret_eli 7 ай бұрын

That windows Sound when bro pressed a killed me😂🎉

@satan8175 8 ай бұрын

this angle makes me feel like im about to fall

@GahlicNoodles 5 ай бұрын

camera angle hurts my brain.

@Philbythelake 7 ай бұрын

If I did this, I would just swap the case and keycaps lol. I do not have the patience for all that

@ViciousXUSMC 10 ай бұрын

TIL that there are other switch options for the wooting. Still waiting for a TKL or might get the Drunk Deer A75

@rebornmusma 10 ай бұрын

i’m not really a genius with keyboards but don’t you lose the speed of the switch when you swapped to the orange switches? or do you still keep the speed of the wooting

@Jaeky 10 ай бұрын

You don't lose the speed of the switch when you swap to the Gateron orange switches. This is because the Gateron orange switches are the same as the Wooting Lekker switches in that they are both magnetic and work with the hall effect. Therefore, rapid trigger and everything else is the same.

@rebornmusma 10 ай бұрын

ohh ty for lmk

@clossle 10 ай бұрын

I’ve talked with one of the wooting people and apparently the bottom and stem mold is slightly different resulting in a worse bottom out/near bottomout feeling

@solaceoftheworld 10 ай бұрын

Hi! Thanks for the amazing vid. How do you know that tofu 60 redux's case will fit with your keyboard? I have a local 60% keyboard, and i'm not sure if tofu 60 redux will fit. As in, the layout is completely the same, but how about the screws and stuff?

@KaizxFN 10 ай бұрын

Wooting made it so that most cases will fit

@Jaeky 10 ай бұрын

You’ll have to check with your PCB manufacturer to see if it’s a universal 60% PCB and which cases it supports. If it’s a Wooting PCB it will be compatible with the Tofu Redux.

@Tyrlade 9 ай бұрын

Yo, thats pretty good, its basically a custom already and looks clean. I'd just play around with foams (no foam, wooting foam, tofu foam) and see what works best, it's got a pretty nice body now with the alu case and weight. Also you can try to get one of those small deskmats for keyboards to move it around, can make it easier maybe?

@MaZEEZaM 5 ай бұрын

or silicone

@perspicacity89 10 ай бұрын

Your keyboard is sick as fuck. Nicely done.

@PedroSombreireiro 10 ай бұрын

why did you change for the KS20's orange? The normal lekker's were not good enough? I mean, you could have lubed the lekkers ... I actually got the white's, but really wanted to understand your reasons for the orange's because they are very similar to the "normal" lekker's

@Chugs4Serotonin 10 ай бұрын

He said why in the video. Bought them because he didn't want to lube every lekker. Honestly don't blame him either

@seansiquig 10 ай бұрын

great video man! I just bought the same Tofu60 Redux with the brass weight, and bought my first set of keycaps! can't wait for my stuff to come in. mine will look super similar to yours, but I bought "retro" looking keycaps :D can I ask, at 8:31 you state you don't think you need the stand off screws; can I ask, just how many screws did u actually use to screw in the PCB? I think u forgot to tell us after saying "we'll find out in a second" haha. I heard not screwing some parts of a PCB allow it to sound better i guess? something about flex?

@Jaeky 10 ай бұрын

I used only one of the pegs on the bottom. But I used every screw. I’d rather not have flex on the Wooting since I don’t want to risk messing up the magnetic switches.

@Hydra24K 9 ай бұрын

Love the keyboard, I had the exact same case and keycaps in mind when ordering it about a week ago. I like your taste❤

@h4row 6 ай бұрын

hi, where do u find these keycaps please?

@yorease 8 ай бұрын

Yo I used your link and spent $159.55 usd idk if it’ll help you out but I did it💪

@taytayaxolatte 9 ай бұрын

it definitely isnt great, but its better than stock wooting lol. luckily i never got the wooting so if i decide i want one, then i get to just get it with its new 60HE+ version, with the PC plate and crew on stabs and such. i dont know if i care enough about the hall effect to get one, since i am not competitive by any means, but the option is enticing as a keyboard collector :3

@sethviews 10 күн бұрын

Awesome video! Is there any place we can order something custom like this?

@Hugo-li2uo 3 ай бұрын

Hey, i hope someone will see this but, i have an atk68, not a "cheap" keyboard but not as good as the wooting, would it be good to mod it or should i just buy an wooting to mod it later? Will it makes any difference since it will be a moded keyboard in both case ?

@BraveClam 8 ай бұрын

I got a PC plate with my tofu60 redux, it hardly makes any difference. I still decided to keep it installed, but, was disappointed. I went with the burgundy red case, GMK Pixel keycaps. I decided against swapping to the new Gat HE switches. It plays phenomenally, it doesn't have to sound like a creamy cloud pop for a buttery typing experience. Great video

@RealKyurem 4 ай бұрын

Really? I was considering getting a PC plate since some people said it sounded better but I don't want to go through all that work if it isn't better. I also have the burgundy tofu case, gmk red samurai keycaps, and gateron jade switches. Also do you think the tape mod would improve the sound? I haven't tried it

@BraveClam 4 ай бұрын

@RealKyurem I prefer the PC plate sound signature, but the tape mod sounded a bit too poppy for my liking, so I went without it. I love this keyboard! I can't wait for my Wooting 80HE to arrive, but I'll have to wait for a nice case to release

@Zombie101 6 ай бұрын

6:45 - you put those on the inside of the redux case, on those sticky outty bits around the inside perimeter, so that the pcb rests on the rubber soft pads instead of the alu redux case

@jakebeaty8556 10 ай бұрын

Do you think it sounds better with or without the foam? I'm currently using a tofu 60 redux with the brass weight and lubed switches and stabilizers, I quite like the sound of it but wasn't sure if the foam added or took away from the sound.

@Jaeky 10 ай бұрын

I like it with the foam from the Wooting case. Without foam it sounds too metallic and hollow.

@Zombie101 6 ай бұрын

use the rubber sheet from redux kit, sounds great

@P0W3RH0U53 4 ай бұрын

If you do NOT have an extra screw (or more) left over after tinkering, you didn't do it right ;)

@thriann909 Ай бұрын

This is not modding the Wooting this is keeping the wooting mobo and building a new keyboard XD ! Regardless a good video

@steffanhalder Ай бұрын

quick question if im just doing tape mod and bandage mod, do i have to remove the switches?

@EnnTomi1 9 ай бұрын

a lot better, but feel like still sounds like keyboard from 2013 2014, like barely starting getting good.maybe it is personally preference, but still sounds very "blocky" and not crispy enough for me.

@YDINO69 6 ай бұрын

The Gatoron Jades make it sound way better

@youraveragesledgemain 5 ай бұрын

tbh much better than mine and im not hating but i wouldnt even consider that a wooting anymore lol

@HungLe-jp6ct 10 ай бұрын

I think a reason why Wooting sounds kinda mute because the plate, if you can find a universal 60% alumium or PC plate it should sound better. Anyway it's very high effort video, I like it

@J7T800 10 ай бұрын

It's the way the switch is constructed. Every HE board has a noticeable thud during the bottom out. It's in a similar vein to Topre. They have a distinct sound that's either annoying or amazing.

@Momotaro0125 10 ай бұрын

@@J7T800 not really, the new AKKO MOD 007B-HE with Akko Cream Yellow Magnetic switches sound about 3x better than the Wooting's. Aluminum chassis and like you said, the way the switches were constructed matter.

@f.stopperrmedia1606 4 ай бұрын

Does RGB shine through the keycaps and show the inside of the spacebar, f and j keys etc? I have a GMK set of keycaps on this boad and the bleed from backlight RGB is horrible. I can see the stems and molding beneath the keycap and it does not happen with all white keycaps, namely GMK.

@b7shoota 9 ай бұрын

bruh i have the same switch puller and my fingers were absolutely fucked. the switches on the wooting are so fucking tight in the plate. destroyed half the clips on my L60's. but i swapped to the 45's anyway. lubed every single one too because they sounded like shit still. shit took like 6 hours to fully mod my board.

@renzeldavid4568 4 ай бұрын

I mean can you actually feel the millisecond difference of activating and deactivating switches between a normal keyboard and a rapid trigger one... Most pros still use normal keyboards and play fine with it, I feel like rapid trigger is just a gimmick and not something necessary to compete at the highest level.

@ryboits75 5 ай бұрын

At what point does this stop becoming a Wooting, and just become a Custom? Every part was replaced except the PCB

@Jaeky 5 ай бұрын

imo as long as the PCB isn’t replaced and you’re using Hall effect switches then it’s still a Wooting since the whole point of the Wooting is the performance benefits of rapid trigger and custom action which only require the PCB and switches.

@JeanKastell 2 ай бұрын

Hey, love the sound of the Dash, do you know if milktooth sends out to germany? Watched both your Videos, much love for those!

@Gates-Tech Ай бұрын

yes.i will receive it this week in the netherlands, also the dash:)

@bartimois2584 10 ай бұрын

lmaoooooo, all hands fucked up now part got me crying haha

@JordanProudtobeNL 3 ай бұрын

i dont know why urs sounds so clunky out of stock, mines way better lubed. the modded one sounds 10x better ngl!

@relaxxaimer 2 ай бұрын

Different batches have different amount of lubrication

@lolterm 9 ай бұрын

I told myself i wouldnt mod my wooting and then i go ahead and lube everything get custom keycaps and a new keychain and i dont regret it

@remingtonwalsh620 9 ай бұрын

When you get the Redux case from tofu there is an option for the FR4 ANSI Plate and Carbon fiber ANSI Plate for the wooting 60 compatibility. Do you need them and which one would you recommend?

@seancanja1518 10 ай бұрын

does using another magnet switch affect the rapid trigger of this keyboard function?

@Jaeky 10 ай бұрын

No, although some say the Gateron oranges limit the rapid trigger to 0.4mm

@PedroLopez-yo7nr 17 күн бұрын

Great job. I like the sound. :-)

@christianwachel7247 2 ай бұрын

If you out some tape mods on, my goodness would this sound good

@gilydoesall 10 ай бұрын

finally a clean looking mod bro. ive watched so many other people's modded wootings and they always do the most fucking dumb case swap/keycap color combinations and they always look like shit 💀but yours is mad fucking clean

@Leston505 9 ай бұрын

They all do the same case though, idk which ones you’ve been watching

@gilydoesall 9 ай бұрын

@@Leston505 this guy gotta be ai generated 💀

@Leston505 9 ай бұрын

@@gilydoesallmost wooting case-swap videos use tofu cases

@kfv4 5 ай бұрын

Summary: You turned it from black to white

@angelortega240 7 ай бұрын

seems like it might sound better, but probably won't have that 0.1 millisecond response time.

@emoranger37 2 ай бұрын

8:06 it’s a spare in case you lose one of the other 2 screws

@mikerzisu9508 5 ай бұрын

I think you were supposed to install the gasket o-rings on the standoffs before installing the pcb

@anthonyl9116 Ай бұрын

Was anything cut out of this video? I was thinking about doing this myself and was wondering if I could follow this video almost like a guide

@Jaeky Ай бұрын

@@anthonyl9116 Yeah I cut a lot of the process out, but it’s relatively straight forward.

@anthonyl9116 Ай бұрын

@@Jaeky Tnx for replying! I'm sure if I just search up a guide on modding the wooting lots of stuff will come up. Also thank u for linking the keycaps and case! saved sm time cuz i didnt have to look for them

@hashiramember001 9 ай бұрын

those gats over l45s?

@qermax21 10 ай бұрын

you did fully custom board, theres nothing left from wooting

@mobman2503 10 ай бұрын

that's what I was saying LOL

@Jaeky 10 ай бұрын

All the features of the analog switch such as customizable actuation and rapid trigger still work so that’s really all that matters.

@Mori-.- 8 ай бұрын

hey Jaeky, could you possibly send me a link to those keycaps in your keyboard please? I appreciate the video and plan to do the same thing to my wooting that came today. Overall, thanks for inspiring me!

@audietrongt9597 3 ай бұрын

bro just get a new keyboard at that point 😭😭

@KaKazZer 6 ай бұрын

I think you should've tapemod it its pretty easy to do and if you want the stabilizers to sound even better then you can bandaid mod but thats long to do

@sirMYSTlC 6 ай бұрын

with the custom case should i get the compatible plate for the wooting 60he option and if so which one?

@kimmywiththestimmy 9 ай бұрын

do all keycaps support wooting switches?

@Zombie101 6 ай бұрын

@1nfdl857 2 ай бұрын

basically not wooting 60he anymore

@JDdrizdog 9 ай бұрын

Surely if you use different switches it won’t have a 0.1mm actuation point

@sunefrodi 3 ай бұрын

My endgame keyboard arrives mid august HOLY MOLY!

@Chugs4Serotonin 10 ай бұрын

Orange cats are the best.

@darkking4748 8 ай бұрын

I would buy the wooting so quick if it sounded good

@hiklein2495 9 ай бұрын

Are you sure its actually your Endgame Keyboard? I mean if you get more and more into the Keyboard hobby, i think you will see, that there are maybe a lot more Keyboard Builds that may fully satisfy your preferation. I mean just looking at the Keychron Q1 HE, which is not even close to a endgame keyboard, i feel like, it`s the "custom" or even better version of the Wooting 60HE

@MSJChem 4 ай бұрын

Q1 HE is a 75% keyboard so much bigger. I have both and use the Q1 for typing and the 60HE for gaming. The Q1 is miles ahead in terms of quality and feel though.

@princekiwi9286 8 ай бұрын

Can you buy the wooting 60 without the switches and keycaps so basically a diy kit?

@YepImValk 10 ай бұрын

at this point its not even a wooting lol but great vid i love the video

@AthenesWrath 10 ай бұрын

Well, Wooting just released a standalone module which fits with standard 60 cases lol. So no more modding needed

@itsarsum9147 9 ай бұрын

maan im having so much trouble putting in the screws, any tips. Also did you install the standoffs to the left and right side?

@lixxtning884 9 ай бұрын

by changing the switches do you still get to keep the features of the wooting like rapid trigger and adjustable actuation???

@Jaeky 9 ай бұрын

Read pinned comment

@houndonyt4882 Ай бұрын

can we get ur wooting software settings for valorant ?

@Jaeky Ай бұрын

fdcefb497255347c1c5d3953bb1068456a53

@ilventoro 5 ай бұрын

Hey Jaeky, I've made the exact same config as you did to my wooting but some of my stabilisers feel too heavy after releasing. Do you feel the same too?

@Jaeky 5 ай бұрын

No, mine feel fine. You might have overlubed your stabs.

@ilventoro 5 ай бұрын

@@Jaeky I didn't lube them so maybe it's overlubed from factory then. Thanks!

@amirrezaafzalinia1556 10 ай бұрын

me with 50 dollar keyboard crying in the corner and still praying to get hot swap keyboard to mod it lol . sick build man didn't see anyone to make it sound this creamy

@Vel0X3 9 ай бұрын

Hey man great video! Going for almost the same build. I thought the switches from badseeds video were the new lekkers 45 from wooting? Not the gatherons which kbd offers. Am I wrong?

@Jaeky 9 ай бұрын

No, if you're referring to this video: kzbin.info/www/bejne/oH3LoIprh5dklcksi=oTHziq74pBOS6hn0 it's the Gateron oranges from KBD.

@rhys72_ 10 ай бұрын

are they keycapes good? cause im trying to upgrade my apex pro mini.

@mysticx_yt 10 ай бұрын

Bro it doesn’t work with other seitches

@dario4496 9 ай бұрын

7:57 they give you 1 extra screw in case you lost one or one of them is damaged

@boredomkid8271 9 ай бұрын

I love watching these keyboard videos knowing that I need an actually keycap set for my cheap e-yooso keyboard that was a hand-me down from my brother which he only gave me the bare bones of the keyboard. The switches are probably the second thing I need since I did lube the red switches that originally came with the keyboard. well at least I lubed most of them. I'm trying with what I have 😭

@tinypickle 8 ай бұрын

How come you use the standoff for the space bar?

@sza8999 6 ай бұрын

Is it better when playing Valorant?

@Jaeky 6 ай бұрын

Modding it doesn't affect the performance. If you're talking about the Wooting in general, yes it's better for Valorant compared to a typical gaming keyboard. You can watch my review of it here: kzbin.info/www/bejne/oJ3Pd2ynpqh7lbcsi=X5VnaeI1zzjuVKVw

@Zxchnguyen 5 ай бұрын

If you get new switch is that still have rapid trigger or not

@Jaeky 5 ай бұрын

Read the pinned comment.

@Zxchnguyen 5 ай бұрын

@@Jaekydang bro why is so long😅

@teod5433 10 күн бұрын

Works the same with the 60he+ right?

@Jaeky 10 күн бұрын

Yes

@jakobranzau5686 10 ай бұрын

Isn’t the only thing from the wooting here just the pcb? Does it have to be a wooting pcb use the rapid trigger switches?

@Jaeky 10 ай бұрын

Yes, and you need to have magnetic switches

@doggoo7 10 ай бұрын

how come you didnt get the lekker45 switches?

@Jaeky 10 ай бұрын

Didn't want to order separately from the Wooting website since it would cost more for shipping. I went with the Gateron oranges just cause I was already buying the Redux from kbdfans so it would all ship together.

@doggoo7 10 ай бұрын

@@Jaeky ah fair enough man i just checked other comments before and saw that gateron make the lekker switches anyway

@marnixMVDS 9 ай бұрын

dont u completely lose the advantage wooting has by taking the lekker switches out? it does look and sound rlly good tho

@Jaeky 9 ай бұрын

Read the pinned comment.

@marnixMVDS 9 ай бұрын

Sick! Great vid also!

@Goodbalisongflipper 10 ай бұрын

wait but now it wont have the advantages the wooting switches are the technology. Why not just get a custom from the start instead of basically wasting it

@Jaeky 10 ай бұрын

Switches are still magnetic. As explained in another comment, the Gateron orange switches are the same as the L60 Lekker switches, the only difference is the spring weight. In fact, Gateron is the company that makes the Wooting Lekker switches. So all the analog features still work.

@Goodbalisongflipper 8 ай бұрын

@@Jaeky thanks for the clarification then I agree this is quite good