My F100 Get's a HUGE Drivetrain Upgrade!

[@lordrc9610]

17:12 Noise complaint has had a very hard life

[@cobyfield9237]

Noise Complaint, Tourm8r and Luke's Maverick 100%

[@302toneranger]

25:17 That's a nice looking shaft you got Craig, wish mine slipped in that easy.

[@Thecraig909]

Slippery shafts for life.

[@discoffeehawt3638]

Pause

[@termonator001]

"Hawk Tuah and spit on that thang"

[@jerdman10]

I've had a T56 magnum from SST sitting in my dad's garage since February waiting for warm weather to put in my truck. Then some old man did me the favor of totaling my truck while it was parked in front of my house. So the trans got pushed back while I got a new bed put on it and fresh paint. Hopefully I'll have it installed before the end of summer.

[@snaggletooth1773]

Love that shop environment. I know everyone is doing their own thing there but if I could get my friends to hang out while I wrench on things it would be a lot more fun.

[@jerrenb...]

This will be a professional saying "craig spec" 29:25 i like the thought you put into the parts for the build i want to do the same just strong high quality parts

[@302hobronco]

One of the best mods I ever did to my sn95 was to add a lightweight fly wheel. Night and day difference. I love it.

[@Jared_the_silverback]

26:09 “what the sigma” 😭🙏

[@heelandtoe_]

The TKX is so good, and i’d say does this engine justice - nice upgrade!

[@mr.t4967]

You should do a full build break down of the F100! I’d love to know the specs, I’m trying to build a similar setup right now with my Mexican block 302

[@isaacpsi]

He went over it in a recent video touring his car collection. You may be able to find what you’re looking for there.

[@HighRevNation]

I went with a American Powertrain 6 speed setup on my truck, but I absolutely LOVED switching to a tremec. This thing is going to RIP!

[@MrSlimeMan01]

Tom is the reason I’m going with a tkx instead of any of the older transmissions for my fox, my car makes more power than noise complaint and it would probably eat an input shaft on the first hint of abuse

[@ginom3034]

Always look forward to your new videos, Ford all the way. I’m laughing at the guy in the AT&T lot picking up garbage as punishment, been there and done that!

[@OurCabinInThewoods]

Love the sound of her i can't wait for you to go through the gears.

[@Thecasualgamer-pp5wc]

The toms refurb shout out!!! Much love appreciated to small creator's!!!

[@captainschannel9331]

Nice !love the truck content! 🏴‍☠️

[@bigfootgarage2201]

I’ve got a 92 lariat 5.0 short bed extended cab and I want to do a similar engine build to what’s in your truck, your truck just sounds amazing and preforms so well

[@Viktorrhansen]

Awesome man! forgot we dial gauged that thing hehe

[@yaboykris2118]

Your truck sounds so good. If I wasn’t swapping my 302 with a coyote in my 89 mustang, I’d do the same set up as you.

[@therealracer135]

You can probably find a lightweight chrome moly flywheel which is close to or even lighter than the alloy flywheel and you won't have to worry about it flogging the crank bolt holes out like what happens with a lot of alloy ones

[@cobyfield9237]

Our good friend Tom really needs a G101 or GSR from G-Force. If you break the TKX, definitely go for one of those.

[@bobmanzi7712]

great stuff thanks

[@Zeroflax]

Im so jealous of your truck, just a rusted out POS shortbox would be $25,000 where im from. Love the truck good work!

[@somerandomness4285]

Still remember when those videos came out 5 speed swapping the truck 🤘

[@Xx_Agent1243]

Im 17 and i got a 1972 f100 long bed and dang your truck is amazing. Im kinda looking at doing something similar to my truck but i dont know if i should shorten the frame or not. But i have an original 360 that was bored over 0.40 before i got it. Ran beautifully but its now in the shop working on it to make it better.

[@royceabbottsexcavation3709]

You’re going to love this setup! That’s exactly what my setup is. TKO 6 speed!

[@partysodown]

The TKO 500/600 is a 5 speed. This is a TKX anyways, which is also a 5 speed and is an updated version of the TKO

[@victor440_]

Hey Craig you put that little zinc coated piece on the bellhousing with the two bolts they don't need loctite on them

[@flipflopsgarage]

I kept the z bar setup with my TKX and it works perfect. Did you end up going close or wide ratio?

[@speedy008]

Eu vou ter que sair aqui do Brasil só para gravar esse teu carro! sensacional QUE PROJETO LINDO! 🥰

[@Johnny-jr2lq]

I had to drop a comment. First I have always liked this body style of ford pickup. My dad got my grandfathers when he passed away. So I have always had a fondness of them. The body shape the reliability the power the one we had was equipped with a 351. But all that aside when you did your first video of your ford with the NASCAR exhaust I realized that’s the vehicle i would like to restore. In my opinion you did such a good job on your ford pickup. What’s so funny about this is generally speaking I’m more of a GM guy. My family liked both GM and Ford my grandfather worked for ford and my father worked for GM. So we had both in the driveway. Overall those years of the F series pickups is really the only ones I think are good. Even though ford has made other very cool cars and trucks. All that aside I just wanted to say great job on your build it’s inspiring me to do a build very similar.

[@Ghstwavz]

Everytime I see the rear end, makes me think how sick this thing would look with a center rear exhaust. I did it to my ranger and have 0 regrets.

[@JaredR1996]

By far one of the coolest sounding trucks on the planet

[@partysodown]

Just bought the TKX for my foxbody yesterday!

[@jpmendoza138]

Malwood clutch pedal instead of that fork.

[@CX1320]

should look into a Bangshift Billy Thrust Bearing

[@fartzinacan]

I absolutely adore this truck and the noise it makes.

[@gregh6794]

Please tell me that diff pinion has a solid pinion spacer :) I'd say so since you mention few different setups . Don't laugh have seen a pinion lock up & sheer off at over 120mph as a guy didn't know, tightened up the yoke with a collapsible spacer :(

[@lional6291]

the young never listen till it goes BANG

[@fudge5822]

While we’re here…

[@L42776]

The story of my life

[@calebberglund53]

Famous last words (before greatness)

[@mridoit1701]

Love Tom Refurbs going around, Noise Complaint is a kickass car

[@rgbigdog]

When you said, over in the normal section over here, it had me busting out with laughter.

[@ChevyGuyK20]

Are we going to see the hats come back into stock on the website?

[@lankyjeep8432]

Why do you need offset bolts for the bellhousing? You said it’s important but I can’t figure out why it is important, I’m assuming it’s to line things up but why you need them to help you line things up I can’t figure out

[@Thecraig909]

Offset dowels allow for the input shaft to be perfectly centered to the pilot bearing/bushing in the back of the crankshaft. If they are off, the input shaft will drag a bug and the shifts wont be as smooth and will prematurely wear the transmission.

[@darenkilminster7692]

Hotwheel should make a miniature of your truck

[@1091cole]

Follow up video should include a 6 speed in the crew cab

[@JeronWhite]

Nice ford

[@ericreimer6627]

Time for a Crown Vic suspension so it'll handle. You can even paint the control arms the same color so no one will even notice! 😃

[@wyattbrosch4606]

Hey Craig I was wondering what seat you are running in your truck, I am trying to find some bucket seats for mine and plan to take inspiration from you, if you could let me know I would appreciate it. I love the videos

[@zachorytvrdy7093]

What transmission would you recommend for my 1970-72 Chevy with a 402 big block? I've looked around a little but wanted to ask, most are tkx but Silver sport says it's not right/won't work

[@thomasmueller9777]

Love me some F-100!!!

[@oswaldocontreras1360]

Ok Craig,nice shop,nice cars, good builds but still on your back to work on your cars it is time for you to get a car lift 4 post 2 post, I am sure you could get a god deal with any lift company I am shure they will sponsor you, got nothing to lose ,you could just buy one work will be a lot iasier,go for it, when will you take this truck on hot rod power tour like Salomon said.

[@wakeupbreathing]

That drive shaft is so pretty you need clear bed floor to see it…

[@Savageplumber85]

20:19 😂😂

[@Michael-gd8gw]

What about the car you had did you get it painted

[@davonervin]

Can we get a 7.3 powerstroke frame swap for the crew cab? That would be so cool or a 6.0. Expensive I imagine but so cool.

[@MrTakeone51]

Took a shot every time you said gnarly 😆

[@paulflores7904]

Love that truck, serious question tho. All the work and still no frame swat?????? Why

[@robertc.petersonjr.7877]

When in helk are you going to finish your """Galaxies""" it is going onto 4 years since you got the Red Galaxie. What is the hold ?

[@DareBrad]

What rear end and gears are you running? I want to do along this same build but w a 96 obs

[@jessiethomas7078]

Truck sound awesome 👌

[@dean_4.6]

TOMS REFURB MENTIONED🗣🗣🦅🦅🇺🇲🦅🗣🗣🇺🇲🦅🦅🇺🇲🇺🇲

[@maxfalkner8849]

I think I speak for all of us when I say, we need to hear the story of Craig watching a flywheel explode and cut somebody's feet off! he kind of just glanced over that

[@jeremygibbs2275]

Ayo wanna donate that old 3550 to a longtime follower who's too broke to 5 Speed swap his 67 lol. New set up looks rad!

[@StephenShreds]

Might as well!

[@JoshuaMoyer-bi1og]

You need to get back on the gaxlie

[@shermanelliott5730]

YES WHAT TALKING U SO LONG TO GET BACK TO GALAXIE, U KEEPING JUMPING ON TO NEW PROJECTS

[@Thecraig909]

I wish it was that easy my friend...

[@shwanjones8134]

​@Thecraig909 it be like that wish you've kept that FE and built it you're missing out on the chop and torque

[@joshuamoore9414]

When i drive fast makes me blow my butt. Sometimes i drive so fast my shoes fly off! 😂😂😂😂😂

[@racinjason68]

Lifted 1st Gen @ :28. 😁

[@ericlapointe838]

Nice that might hold up😂 gearjammer

[@bennetfox]

Any updates on the pair of Galaxies?

[@izzynutz2000]

Put that five speed in the galaxy

[@5point4LSX]

I love that TKX!!!! have one on my LS Swap Mustang. Hit up MGW for their top loader shifter

[@mrmoss149]

Why don't the reverse lights lite up?

[@JasonGrooms-x7u]

Badass man I love that truck

[@Backwoods_870]

That ole Ford hittin

[@brianodom9411]

What gear ratios did you go with on the TKX?

[@droppedf100]

Idk if I missed it in the past but what upgrades are done to the 9”?

[@212caboose]

Did I miss what happened to the Galaxie(s)? Haven't seen it in a WHILE.

[@_OUTLAWPERFORMANCE]

Number 100 Like LET'S GOOOOOOO!!

[@yxungdxggerdixk5738]

BOOOM TUBES

[@AfterHourBuilds]

For a second, I thought it was a t56 in the thumbnail

[@gibhamracing37]

I put a TKX in my Chevelle last year. If I'm honest i haven't been happy with it. I don't like the way it shifts. It feels clunky and i don't like the massive throw it has. I swear it feels like your shifting an old Ford truck trans

[@erikalarson6803]

No driveshaft loop?

[@alexriel6013]

Love your f100 Craig best sounding old school v8 truck out there in my opinion

[@2koolchris291]

Currently trying to fix my washing machine while watching this.. but I think the transmission is messed up

[@dillondavis2550]

Ok, hear me out. You should totally get an S1 Sequential kit for the new trans

[@nivathewolf7331]

They apparently don’t do anything for a 5.9 magnum 😢

[@____MC____]

As long as the drive shaft isnt oceangate brand, it should work as advertised.

[@KaiserBruh]

also i cant believe that after all these years that dam "Ecoboost Economy" badge thingamajig in the tailgate is still on there ☠️ how has that not fallen off already

[@KaiserBruh]

me: **looks at title** bro ANOTHER one?? 😭😭🙏

[@glenryan6569]

Steve Morris broke his Carbon drive shaft in his wagon but he's around 4200 hp to that tires, so you should be safe for awhile.

[@tree8teen585]

craig909 shaft reveal!?1! 18+

[@lincoln7390]

I wish you would raise the truck in the rear throw a 28-10.5 hoosier some suspension upgrades & drag race it like what was the purpose of the build it doesnt corner its not a nascar theme

[@lincoln7390]

Oh and fix the front alignment , a ford front end is wider than the rear so choosing a wheel that doesn't poke out would help the look

[@yxungdxggerdixk5738]

LET TOM MAKE N WELD UR EXHAUST

[@rogermcgrady2019]

What happen to 64 ford

[@wadetomes9265]

While I'm here .... stickers?

[@calebberglund53]

When are we gonna see you slide the clown Vic?

[@davidrose2382]

2000 hp driveshaft will break at the end join to the metal,waste of money

[@TheMomko]

why don´t you invest in a car lift?

[@diegoalfa17]

🇺🇾😎👍

[@davidrose2382]

Now put butterfly valves on a quiet exhaust mate,nieghbours like me would leave nails in your tyres😅

[@kelvinboyd7459]

Horsepower is not what you're looking for torque is what you feel in the seat of your pants. Torque is what will break your drive train components. Just saying don't be fooled by massive Horsepower

[@Lastrealjeep]

Hold the camera still, getting motion sickness....