My first EVER time sharpening skates with NHL Gear Customiser Marco

Must watch - • Wayne Gretzky's Custom... NHL Gear Customiser Marco Argentino teaches me how to sharpen Hockey Skates for the first time ever ! CCM Total Custom Skate - What options do you get ? • CCM Total Custom Skate...
Get your own gear - bit.ly/2Qduaim
CCM FT2 vs FT1 - • Unreleased CCM JetSpee...
CCM Hockey sticks explained - • What is the difference...
5 things all players should know about Sticks - • 5 things EVERY hockey ...
Hockey skate fit video - • 5 Things All hockey pl...
Get your Own Synthetic ice training space! Small or large xtraicehome.com/product/synth...
Xtraice HOME set up - • Hockey tiles you can S...
#NHL #Skates #Sharpening
If you aren't already, please follow us!
/ hockeytutorial
/ hockeytutorial
/ hockeytutorial

[@Licensedbeast]

As a guy who sharpens skates, you can now see why it takes more than 5 minutes to sharpen a pair! The worst customers are the ones who don't understand why they have to wait 25 minutes when there are "only" 3 pair ahead of them. It takes time to do a good job, I can rush yours if you want.

[@anthonypags9945]

It's the most annoying thing too when they come in 10 minutes before a game and expect theirs to be done before everyone else because of that

[@goprop.o.v4495]

The worst is when we get people who go crazy if you stone a black blade or shiny blade, no, you don’t have to use a stone, but for performance, it helps, but all it is is paint, I’m using black steel and it’s coming off just with pucks and other people skates hitting them

[@anthonypags9945]

@@goprop.o.v4495 Ummmmm no. You actually shouldn't be stoning black steel or the shiny steel. Black steel is carbon coated which means you don't need to stone it after sharpening or whenever and you shouldn't be sharpening them as much because of the carbon coat. The only reason to stone a skate is to get rid of nicks making the blade face outward. So if a black steel blade is doing that you should probably just get it sharpen again. I went from sharpening my skates every 5 games with black steel to every 3 with regular steel

[@goprop.o.v4495]

A Pags I’ve talked to both CCM and Bauer reps, they said that you can do either or, it’s all personal preference. I’ve tried it without stoning, and did not like it, I could care less about the coating coming off the bottom, it’s going to come off no matter what

[@sparky9608]

@@goprop.o.v4495 Depends on if you mean stoning with a actual stone, I work at a store sharpening blades and the bauer rep recommended I use a leather belt or block of wood to hone the blacksteel or the shiny coated blades like step steel

[@TheWitchOvAgnesi]

Totally impressed by how Marco takes some much time to teach this, and insists on you doing the actual work. The consummate teacher!

[@dnlstomper137]

As someone who picks up a few shifts a week at a hockey shop, learning and becoming consistent is the hardest part of sharpening. It truly is an art, something the people who try to rush you to do their skates faster don't understand. Take your time, learn the craft, skating on your own sharpening is amazing.

[@BrassMan83]

Newfound respect for the folks who are pros at this! It's an art for sure!

[@Hi.Im.Levi.]

I regret being so hard on a couple shops for mangling my steel now lol

[@TheWitchOvAgnesi]

You SHOULD be hard on them for mangling your steel. This is a skater's most important device. Anyone sharpening a blade should be meticulous, whether it's their first pair or 1000th pair.

[@vacayooper4728]

I learned how to do this when I was 14, nightmare, especially with people watching.

[@martinm.9500]

So satisfying to watch !

[@Peekingduck]

Man, what a nice job ! Every skate gets a little better, learning something and improving endlessly. I bet that never gets boring. he seems like such a cool guy too. Great video, thanks for the upload

[@HockeyTutorialOfficial]

Big thanks for watching :D

[@dfsimon]

Good technique demo. It really does not take long to get the hang of it. However, setting up the holder and learning how to adjust it is probably the most important skill. If the blade is not centered on and perpendicular to the stone, perfectly parallel to the table, you need to adjust the holder. I have a Wissota at home. The freedom of not being at the mercy of the skate shops has been a great relief.

[@robd4526]

really nice to see a passionate pro ... great skate sharpening... would have loved to have my skates sharpened by Marko

[@PivotalG]

Thank you for releasing this video. I've always thought about opening a pro shop. Love to spend a week with this and just learn everything about sharpening skates. It's such an art to do properly. Too many places take no pride in sharpening and do them quickly. Thanks again!

[@dobermanguy9437]

Back in the 80s when I used to live in Detroit I met a guy who used to sharpen ice skates for the Detroit Red Wings he had a state-of-the-art machine in his basement and he used to sharpen skates for the team back in the day I was blown away to have such a talent sharpening my skates and let me tell you he did a fantastic job they were not over sharpened they had just the right amount of edge in my opinion it takes skill to sharpen skates properly I really enjoyed listening to this old guy of some of his stories back in the day while he's sharpen my skates perfectly

[@rossi461]

I bought a wissota skate sharpener a few years ago plus worked part time at the local hockey rink so was shown how to sharpen skates. Now I sharpen skates for all my buddies at home.

[@alexodwyer6579]

That is amazing I would of been so scared to even attempt sharpening 👍🏾😂 really great video!

[@pounsfos]

I moved cities a while ago, and got my skates sharpened at the new rink, could never understand why my standard cut always felt rougher. than when i got them done at the old shop, found out why. the new shop certainly doesnt take this much time and care into sharpening a pair of skates, very good video, I want to learn to sharpen my own.

[@cerrem1]

Marco was my equipment guy back in the 90's.... He profiled my blades, side-wall stitched the boots, re-palmed my gloves, replaced broken toe-caps....ect..ect... His skill is what kept me playing in top form... I have never found anyone who could replace him.....

[@j.a.senecal8120]

I know Marco too and have gotten some equipment adjustments done by him. Not only is he a salt-of-the-earth guy (just as a person), but he is definitely one of the best, if not *the* best at what he does.

[@pkstpr78]

I learned to sharpen at 16 on a 3 wheel Blademaster and love being able to sharpen my own skates; but I make my passes going forwards and backwards, I keep the blade on the wheel and go back and forth normally a total of 6-8 passes then stone and done.

[@1967250s]

I sharpened hundreds of pairs of skates at several ice rinks in the D.C. area and it is hard to find good sharpener. I used a similiar sharpener to this here, only the horizontal and cross wheel were right next to each other. One thing I learned quickly was to keep everything clean, clean, clean. Waxing the deck, keep the dust off the pad of the skate holding jig and deck, made things slide so much more easily and made the cut so smooth. Those 'protective' glass guards look like a pain in the keester, making it much harder to eyeball the edge being cut, and harder to get close to the jig and steady it by getting it closer to your body. You can see when they put the jig down, it does not slide easily. Probably too much dirt on the pad and deck, and that will eventually wear away the deck in front of the stone. And cross cutting every time you sharpen cuts down the life of expensive blades badly, and changes the arc, especially if they are figure skates that can cost several hundred dollars just for the blades. I am also a big believer in stoning the edges carefully. Thats all I have to say.

[@martineriksson9296]

I wanna be hos friend! Super cool dude! 😊

[@bordensirk]

He makes it so easy

[@TheGreatChrisB]

As a well respected skate sharpener in my area I appreciate when people notice a good sharpen. It also bugs me when people come in 3 minutes before a game expecting their skates to be ready in 30 seconds.

[@matrixmirage2148]

Man, I wish we had a good sharpener in my city: the only one we had is not available at the moment, and I've been skating on dull blades for weeks now, sliding out in every corner

[@stpierreorama]

Alot of hockey shops do an unecessary amount of passes so that the steel wears down quicker and they can sell more blades. If you get your skates sharpened regularly 3-5 passes per skate should do.

[@endurogubbarna]

Damn its a art doing that by hand. Must be easy getting your blades ruined by a noob pushing to hard or loose over different places on the blade. Whould have liked to see him profile aswell.

[@Licensedbeast]

Profiles are done by machines. They have to be way too millimeter perfect to be done by hand.

[@TheGreatChrisB]

Proper skate sharpening by hand is an art. Any good shop will spend at least 5 minutes per pair of skates. I often have to correct skates sharpened by people improperly trained. Almost anything can be fixed, but it's becoming a lost art. People just want automated machines that are quick.

[@Biblelover1963]

Now you can be the best darn skate sharpener in England, or should I say "only". Lol Good video's!!

[@HockeyTutorialOfficial]

Honestly getting a proper machine in our office ! Just trying to decide on which one.

[@jonathanhill6010]

Blademaster portables are fantastic!

[@goldflashgly513]

how do you make sure the two blades are at the same height after sharpening? Thank you.

[@SuperSokol7]

What kind of sharpener is that? How much does it cost? How often do you need to sharpen your skates?

[@v_ohara9939]

Other skate: am I a joke to you?

[@moneyninja3852]

What was he looking at on the blade? He kept saying there was a little bit more so we need to make a couple more passes. What was it?

[@ChronicRhys]

Fire

[@t.onleee9029]

u play Fortnite?

[@ryanjonsson]

I was a bit stressed watching him cross grind his blade for the first time… thats where everything goes wrong but he did pretty well

[@kellywillauer1059]

Need a parallel guide

[@cerrem1]

The part that is not shown is all the critical calibration and leveling of the boot holder....

[@bbd78954]

So just a quick question. Maybe you should make a video of questions asked by your KZbin comments. are you gonna do anymore player interviews? Another question is what are the workings & paths you have to go through to meet the players or equipment managers to interview? Just a thought seeing how you're very charming and charismatic.

[@jakeroberts9926]

Ok as someone who has sharpened close to 1000 skates I will say that after 1 months it is not that hard to get consistent with

[@TheBollocksPictures]

I'd rather try to beat Chris Pronger one-on-one than to do this. Tried it once, and my blade looked like brass knuckles.

[@StillAliveAndKicking_]

This guy has a degree in theology. Maybe he said a prayer for Chris beforehand. 🙂

[@kellywillauer1059]

Mark the edge of the blade with a marker

[@goprop.o.v4495]

5-7 passes on the cross grind? Might as well get a new blade while you’re at it 😂😂😂 And going all the way to the end of the toe too! I’m having a panic attack!

[@jeremygrove9623]

GoPro P.O.V I’ll never do more than 2

[@simeoinleenir9984]

It's better to do more passes with less pressure the less passes with more pressure i would think

[@goprop.o.v4495]

simeoin Leenir you really don’t need to do more than 4 max, all the cross grind does is make a new surface to sharpen, when you get new blades, you only have to do them until the whole bottom has that “cross-grind” finish

[@danglegear5986]

GoPro P.O.V I was pretty surprised hearing that as well... 5-7 is rather extreme... and all at once too. If I have to go more than 3 I’ll switch to the other skate. A lot of sharpeners don’t realize the blades getting too hot will cause a lot of issues.

[@Alexbell77]

I try to use prosharp, our local pure hockey store doing awful job, they hiring people every month, and they don’t know how to sharpen skates properly. To me my skates is like music instrument.

[@paulcyr22]

Can you send your personal gear to him?

[@stephen3715]

im sure if you pay enough, yeah. better hope NHL isnt playing because he does custom gear for a ton of players in CCM gear. might be a LONG wait.

[@etasDustin]

Let us know how they feel on the ice!

[@HockeyTutorialOfficial]

Video coming on the options you can pick and also maybe a review of the custom skates.

[@etasDustin]

Word! Thanks!

[@bradr539]

Good thing he had two skates, the first one got edited out....😁

[@HockeyTutorialOfficial]

That was the first one. Marco sharpened the second. We didn’t have time to film me trying to sharpen the second skates. We had flight to catch the same day 😓

[@bradr539]

@@HockeyTutorialOfficial sure....i heard the sharpener grabbed and shot your skate across the room..oops!next...😊

[@pegasisilver6249]

Why would this be better then a machine?

[@johndaltrocanto]

Whoever last sharpened my skates fucking gave my edge a 1-2 degree roll inward (inside edge taller than outside), very awkward

[@karibark6092]

Half inch hollow??? That's knife sharp. How about 40 mm hollow with good glide and grip. That's something else. 12.5 mm no way for me.

[@dimitriytbl4oblin]

Видео о том, как усрать новые коньки за пять секунд))

[@cschwab]

This is why you don't take your skates to some 16 year old kid at Canadian Tire. He will be worse than Chris...at least Chris cares and is trying to learn.

[@hollow505]

Canadian tire uses sparx machines where I live, so they can't really mess it up too bad

[@t.onleee9029]

u play fortnite?

[@aidanknotts6986]

TRIKK SHOTZ no one does

[@t.onleee9029]

@@aidanknotts6986 nahh bro i got 40 friends online

[@t.onleee9029]

anyone wanna play? my epic is DRIPP_LaZeR