Tap to unmute

My First Steps after Switching to the SOVOL Klipper Screen

  Рет қаралды 3,417

Avel

Avel

Күн бұрын

Пікірлер: 21
@Avel
@Avel Жыл бұрын
Rotation Distance Calculator - www.service-uplink.de/esteps_cal/calculator.php SOVOL Klipper Screen Case Model - cults3d.com/:1593050 ◽Quick copy/paste for those interested. [PID] PID_CALIBRATE HEATER=extruder TARGET=215 [E-STEPS] G91 followed by G1 E50 F60
@jondykstra4757
@jondykstra4757 7 ай бұрын
Truly excellent info. Just setup my Klipper interface to my SV06 last night. Your video couldn't have been more helpful in getting my machine tuned and my confidence in the interface established. Well done!
@Avel
@Avel 7 ай бұрын
Awesome! Glad it helped! 😀
@joffa5555
@joffa5555 9 ай бұрын
I love your video editing. Cut scenes. Background music and voice over. Really nice video 👍
@Avel
@Avel 9 ай бұрын
Thank you 😁
@TNX255
@TNX255 11 ай бұрын
There is not that much content around about the Sovol Klipper Screen specifically so thank you for making your contribution with these videos! I got myself a SV06 Plus with Klipper Screen from last Black Friday sales. It's been an interesting journey up to now, not without its problems but I think i've finally gotten them sorted out and can start focusing on printing big stuff. (I had bearing and warped bed issues but Sovol support sent me replacements.) The Klipper Screen has been fantastic, indeed completely plug & play and I was surprised how easy it is to configure Klipper by just editing the easy to read config file and doing a quick reboot. And the WIFI! OMG I love the wifi. Being able to control your printer and send stuff to it wirelessly instead of messing around with SD cards is fantastic and the single reason I wanted Klipper Screen in the first place. I have been wondering if it would be possible to control two Klipperized printers with it,like you can with Raspberry Pi's and even the BTT Pad 7. Does anybody have any idea? It seems there is almost half of the RAM available at least when I'm running it, some ~45%.
@UserUser-99
@UserUser-99 11 ай бұрын
Thanks so much for this vid on how to properly tune SV06. Sovol should have included instructions like this, or linked to your video!
@Avel
@Avel 11 ай бұрын
Thanks for the kind words ☺️
@UserUser-99
@UserUser-99 11 ай бұрын
Would you please do a video about getting a USB camera to work with the Sovol Klipper screen? @@Avel
@UserUser-99
@UserUser-99 11 ай бұрын
Never mind the USB cam video. Yesterday I tried to set it up, with no luck. Today I turned the printer on and the cam works!
@Avel
@Avel 11 ай бұрын
I'm glad you got it to work! I was going to make a "shorts" video on hooking one up. I had the same thing happen where it didn't work at first. I just rebooted and it worked.
@W.Keeling
@W.Keeling 11 ай бұрын
thanks for this video, was a great help
@Avel
@Avel 11 ай бұрын
Thanks for watching!
@xy1835
@xy1835 2 ай бұрын
Thanks for the nice video. Do you have any Start/End G-Code upgrades too?
@Avel
@Avel 2 ай бұрын
Thanks for watching! My start Gcode in Cura looks like this (the end Gcode is untouched from what Cura's default is when you select the SV06): G28 ;Home G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up
@xy1835
@xy1835 2 ай бұрын
@@Avel Ah Thank you very much. I think your Start Code is untouched too. I have the SV06 Plus and the standard Start Code is this: G28 ;Home G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up Endcode G91 ;Relative positioning G1 E-2 F2700 ;Retract a bit G1 E-2 Z0.2 F2400 ;Retract and raise Z G1 Z1 ;Raise Z more G90 ;Absolute positioning G1 X0 Y200 ;Present print M106 S0 ;Turn-off fan M104 S0 ;Turn-off hotend M140 S0 ;Turn-off bed M84 X Y E ;Disable all steppers but Z Do you know where I can find a good list of optional Parameters?
@3DKen210
@3DKen210 Жыл бұрын
Thank you. Perfect timing as I just replaced my klipper screen cause I bricked it with an update.
@joffa5555
@joffa5555 9 ай бұрын
What’s the pid step you did for?
@Avel
@Avel 9 ай бұрын
That was to keep the hot end temperature stable because I've changed my part cooling fan. If you change yours or notice that your printing temperature isn't holding fairly steady, it's a good idea to do this.
@joffa5555
@joffa5555 9 ай бұрын
I haven’t taken that step yet. I’m a 3d printer virgin. I’ve been looking into it for the last few weeks and overdosining on how it all works. Resin still trips me out. Was a complete mystery or magic before I looked it up. Bambu a1 I really like but the sv06 is so cheap from Amazon but worried about the extra hassle that the a1 seems to have way over the sovol So sitting on the fence right now and happy to watch more vids. You remind me of old tony. So nice work on the vids. Really nice.👍
@Avel
@Avel 9 ай бұрын
Thanks 🙂 I appreciate you watching! I hear you. They're both good printers, but each has its pros and cons. I'm looking at the SV08 now, myself. I'm sure whichever one you choose, you'll be happy.
50 cordless drill powered Lada - first drive
24:29
Garage 54
Рет қаралды 526 М.
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
OTHER 3D Printers JUST as Good as Bambu Lab
17:10
Frankly Built
Рет қаралды 97 М.
I Made A Golden Pickaxe Using Minerals From My Mine!
32:09
Ghost Town Living
Рет қаралды 275 М.
Making a Titanium Chef's Knife
22:56
Alec Steele
Рет қаралды 546 М.
I'm Building a Self-Tuning Robotic Guitar
11:00
Metalhead Maker
Рет қаралды 325
My First Time Using a Textured Build Plate!
5:16
Avel
Рет қаралды 268
AS-IS Creality K1C from eBay. Did I Waste My Money?
22:04
SV06 Plus Fix Bed Level Issues With Square & True Setup
6:06
3DPrintDemon
Рет қаралды 12 М.
Sovol Sv06 Plus Klipper
5:24
🔥Popoff🔥
Рет қаралды 148
I Saved an Orange Crush Amplifier from the Landfill
15:49
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН