Do-It-Yourself video to fix your leaking garbage disposal
Пікірлер: 194
@larrysee73062 жыл бұрын
Thanks for taking the time to do this tutorial.Old video, but this may help future viewers: @3:15 you show the flange in place and screws tightened. To get to this point, you have to re-install the spring clip BEFORE tightening the screws.
@DIYwithMichaelBorders2 жыл бұрын
You are very welcome & we appreciate you watching. Thanks for sharing your info, any & all helpful info is greatly appreciated. Us fellow DIY’ers need to stick together! Hope all is well. 😎👍
@JS-xj1lg4 жыл бұрын
Thanks! Plumber quoted me $350 to do this! Then he leaned in and whispered “Please don’t pay me $350 for a 10 minute job that will cost you $2 to do yourself. KZbin it and do it yourself. It’s easy!”
@DIYwithMichaelBorders4 жыл бұрын
J S Thanks for watching & we hope you enjoyed the video. That’s pretty nice of him. Hopefully you were able to get the job done. 😀 Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@katelynpriest33068 жыл бұрын
Thank you so much! I had the same exact leak. I was upset because I just moved into my first house and this happened. I took a deep breath, watched your video, and fixed it in lass than an hour for $3. You are a life saver!
@DIYwithMichaelBorders8 жыл бұрын
That is so awesome....you just made my morning with your comment and experience. Im so glad this video helped. Subscribe to the channel if you're up to it. Thanks again for taking a few minutes to watch the video!! We hope your settling into the new house experience is easy from here :-)
@juice54359 ай бұрын
Same for me. Now I’m on my way to fix the garbage disposal with the help of this video.
@DanielJesseLife7 жыл бұрын
This video saved my butt this past weekend - I replaced my disposal. It was exactly the info I needed to get the job done. Thank you!!
@DIYwithMichaelBorders7 жыл бұрын
New Revolution Ventures Awesome and thank you for sharing your comment and experience. So glad the video helped. Please Subscribe to the channel that would be awesome thanks again 😎👍
@TimmyM20004 жыл бұрын
Awesome video. Had this exact scenario and set up. Your video helped me avoid a costly repair bill from a plumber on short notice. Had this fixed in under an hour counting the trip to home depot. Entire couple kit and putty was only $19! Saved a lot and got it done. Thank you and A+.
@DIYwithMichaelBorders4 жыл бұрын
TimmyM2000 Glad it helped & saving money in these rough times are key. Well done! Us fellow DIY’ers need to stick together. Many more helpful videos to come. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@babatundenasiru5056 Жыл бұрын
You’re a good instructor! Thanks.
@DIYwithMichaelBorders Жыл бұрын
Good morning, you are welcome. Thank YOU for sharing this. 👍
@FourKnown4 жыл бұрын
Yours is the only video that shows the problem mine has and how to fix it. Thanks!
@DIYwithMichaelBorders4 жыл бұрын
John Packard What’s up John, thanks for watching! You are very welcome! Glad it helped. Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@Heizenberg324 жыл бұрын
Thanks for the video! I replaced the gasket first and it still leaked. I had to take it all apart again to do the putty. Next time I'll do it all the first time. Well worth saving the hassle and guesswork.
@DIYwithMichaelBorders4 жыл бұрын
GerbilKor Awesome Awesome & thanks for watching. The putty makes a big difference. That stuff is magic...🤔 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@tphelps868 жыл бұрын
Thank you so much for this...saved us a bunch of money on a plumber and make the fix very easy! Had to make a small purchase to finish up, but total time working on the garbage disposal was less that 20 minutes!
@DIYwithMichaelBorders8 жыл бұрын
Hey that is AWESOME....im so glad it helped. Thanks for leaving a comment. Subscribe to the channel if you're up to it...thanks again!!
@tainj.curtis78633 жыл бұрын
This saved me a call to my plumber! Thank you!
@DIYwithMichaelBorders3 жыл бұрын
Great to hear & we appreciate you sharing this. Welcome to the DIY Raptor Club. Enjoy your day. 😎👍🔧🔩
@Chris-fb8bw7 жыл бұрын
Thank you, Michael. Awesome video. Easy to follow and understand.
@DIYwithMichaelBorders7 жыл бұрын
Chris Francendese Hey very cool and thanks for checking out the video and sharing your comment Chris! So glad the video helped! Please Subscribe to the channel and turn on your notifications that would be awesome thanks again 😀👍
@davep66034 жыл бұрын
Thanks for posting this video! Looks pretty clear. I get to try this out this afternoon (after picking up the plumber’s putty).
@DIYwithMichaelBorders4 жыл бұрын
David Pattelena You are very welcome David. After you pick up the plumbers putty and take on this friendly DIY project, definitely keep us posted if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
@GoldenNinja504 жыл бұрын
Hi, question my disposal kerps tripping breaker. I've done the allen wrench twist underneath, broom stick trick and it keeps tripping. It does leak and has leaked for awhile even when it did work. Can the leaking be tripping breaker? Its plugged into a GCI and then powered by a wall switch. Unit is 2 years old. Thanks
@GoldenNinja504 жыл бұрын
It leaks and drips down from disposal. Leak doesnt go in receptical.
@DIYwithMichaelBorders4 жыл бұрын
Golden Ninja 50 Thanks for watching. The leak may be causing added moisture to the lower fuse which in return, may be triggering the trip. We recommend inspecting all electrical wiring & ensuring all wiring is in good safe working order. You will want to get a new Disposal if it’s leaking at the bottom. Keep us posted. Let us know if you have any questions, us fellow DIY’ers need to stick together. 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@RMR_IRL6 жыл бұрын
Thank You for this video very informative. Mine is leaking in that exact spot..
@DIYwithMichaelBorders6 жыл бұрын
Renee Roveal Awesome Awesome thanks for checking out the video Renee. We appreciate you taking the time to reach out to us! We are glad the video helped. Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again 😎👍🔧🔩
@biadias3343 Жыл бұрын
Thank you so much! Just fixed my leaky sink thanks to your video!
@DIYwithMichaelBorders Жыл бұрын
Great job making it a DIY project. Definitely a rewarding and enjoyable experience, not to mention saving money in the process. We appreciate you sharing this. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
@hame556 жыл бұрын
Thanks guy...as a handyman these are a lifesaver.
@DIYwithMichaelBorders6 жыл бұрын
Hamish Ziegler Thanks for watching! We are happy to hear the video helped. Let us know if you have any additional questions! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! Also, below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal. Definitely check those out! 😎👍🔧🔩
@hlecaros3 жыл бұрын
I truly appreciate this video! Thanks so much!! I had water leaking like on the video and thanks to you I fixed the problem. Blessings!
@DIYwithMichaelBorders3 жыл бұрын
Great to hear & we appreciate you sharing this. Sounds like you are all back up and running. Great job & hope all is well with you. 😎👍🔧🔩
@adrianahurtado75822 жыл бұрын
THANK YOUU! I DID IT! I DISCONNECTED the food disposal, I feel so powerful 😄😄 but this is all thanks to this video. I am half way, but I feel good about doing it 💪
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & sharing this Adriana. Completing your DIY projects are definitely powerful & rewarding. 😁 Keep us posted on your project as you finish the 2nd half.
@tiffany55823 жыл бұрын
Mentioning: that ring under the top units, may or may not be the death of you. Or the stress of trying to pop it back on May take you out if not close to it. Either or. 😂😭 Anywho, thank you! Saved mucho monies.
@bobbymo56422 жыл бұрын
I would recommend filling the sink when testing. I found that when people leave the sink full is when it leaks.
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & sharing this, any & all helpful info is greatly appreciated!!! 😎👍
@T3rr0rDr0n313136 жыл бұрын
This was great, exactly where my garbage disposal was leaking. $1.50 later and 30 minutes if my time, it is no longer leaking! Thanks!
@DIYwithMichaelBorders6 жыл бұрын
Michael Baker Very cool. We love hearing experiences like yours, saving money is awesome! That’s too cool! Let us know if you have any questions along the way! Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal. You may find this PlayList to be very helpful. kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@gonziebone8 жыл бұрын
I hand no clue on how to fix my leaking sink/garbage disposal. I did it in 30 minutes watching your video my hero thanks
@DIYwithMichaelBorders8 жыл бұрын
+Gonzalo Arellano Hey there thats awesome news....thanks for viewing and also for leaving a comment. Im so glad it helped. Subscribe to the channel if you're up to it. :-)
@foyjulislam44328 жыл бұрын
+Michael Borders @
@wjfritts9 жыл бұрын
Getting ready to try this....hope its that easy. Thanks for the video
@DIYwithMichaelBorders9 жыл бұрын
+Bill Fritts Thanks for viewing, how did it go?
@davidbrandel13113 жыл бұрын
One of the three screws is rusted shut and will not turn. I was able to turn the housing so the stuck screw is on the outside of the upper housing. Did I hear you say that it could be pried off?
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. You may need to purchase a new flange housing kit to pick up where the old one left off. If interested in purchasing this kit, visit our Amazon affiliate link below. amzn.to/3q8pQlm 😎👍🔧🔩
@tylermack45304 жыл бұрын
Awesome video! Thanks so much for making this! I fixed my leak for $2!
@DIYwithMichaelBorders4 жыл бұрын
Tyler Mack You are very welcome & we appreciate you watching. Fixing & completing a DIY project for $2.00 is great. Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
@Silarias6 жыл бұрын
I used this video to help fix mine, thanks for posting this!
@DIYwithMichaelBorders6 жыл бұрын
Silarias Awesome Awesome & thanks for watching Silarias! We appreciate your comment! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! Also below is a link to our Appliance/Home Repair Video PlayList. It contains several helpful videos that you can benefit from including many more videos garbage disposals....definitely check those out! 😎👍🔧🔩 kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
@hateroc19148 жыл бұрын
This was amazingly helpful and so simple... Thank you so much!!!
@DIYwithMichaelBorders8 жыл бұрын
Awesome, thanks for viewing! Glad it helped, subscribe to the channel if you're up to it. Thanks again !
@jays12996 жыл бұрын
Very useful because this was our exact problem. Thanks.
@DIYwithMichaelBorders6 жыл бұрын
Jay Stoler Awesome! Thanks for watching Jay! Glad the video helped! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! Below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can benefit from including additional Garbage Disposal MX videos. Definitely check those out! kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
@jays12996 жыл бұрын
Just subscribed. It's fix up time on the homestead. Thanks.
@DIYwithMichaelBorders6 жыл бұрын
Jay Stoler Keep us posted! Let us know if you have any additional questions along the way we are here to help! 😎👍
@carlargon40996 жыл бұрын
Great video! Followed and fixed my problem! The only hard part was the stupid garbage disposal. I eventually got it put on!
@DIYwithMichaelBorders6 жыл бұрын
Carl Argon Awesome Carl, that’s great news & you are very welcome & we want to thank you for watching & sharing your comment. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome. Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...definitely check those out. Thanks again! 😎👍🔧🔩 kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
@dallancruz7343 жыл бұрын
Thanks for sharing! It will help me to know how to properly apply the putty! I hope this solves the issue I had when installing a brand new stored bought disposal that was leaking from the bottom.. any thoughts?
@DIYwithMichaelBorders3 жыл бұрын
You are very welcome & we appreciate you reaching out to us. Keep us posted on how the putty works. Hopefully it will solve issue. Us DIY’ers need to stick together! Hope all is well. 😎👍🔧🔩
@dallancruz7343 жыл бұрын
@@DIYwithMichaelBorders thanks! Putty did its proper job!! No leaks from the top. However, I noticed the brand new disposer leaks from the bottom again...
@DIYwithMichaelBorders3 жыл бұрын
@@dallancruz734 Thanks for the reply, that’s not cool. You may want to return it for a new disposal. Keep us posted. 😎👍🔧🔩
@DRAGOINTHEHOUSE3 жыл бұрын
@@dallancruz734 I just installed a new one and its leaking from the bottom also, did you fix your problem ?
@dallancruz7343 жыл бұрын
@@DRAGOINTHEHOUSE unfortunately, I had to returned it. It must have been the seal that connects to the PVC pipe or something. The new one that I got, worked pretty well once installed properly. Best wishes!
@kbfg-hfjy48722 жыл бұрын
Thanks, My garbage disposal seal started leaking with cold weather and I found the three screws on the flange were not tightened at all? Should they be?
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. Tightening the screws a bit may solve your leak. Keep us posted. 😎👍
@milkyway8082 жыл бұрын
Thai is what I need video,later on I’m going to check my friends one!😎
@DIYwithMichaelBorders2 жыл бұрын
Very cool & thanks for watching. You will make your friends day if you find there is an issue with his or hers and you fix it. Welcome to the DIY Raptor Club. 😎👍
@bradh61855 жыл бұрын
Something in my disposal broke(while I was using it) and it is gushing water from several places in the bottom when I turn on the water. I have to think it is traveling through the motor compartment. Any ideas? I did fish out some pieces of plastic fork from the top.
@DIYwithMichaelBorders5 жыл бұрын
brad h Thanks for watching & sharing your experience. Safety 1st, make sure you unplug Disposal from Outlet before moving to next steps. This has happened to us in the past. It made us think that our Disposal was 100% ruined. A few things you can do. 1. With your Disposal off, run water full open & use your Unclogging Disposal tool & try to loosen up object. 2. Try removing object if you can see it. 3. Fill entire sink full of water & then turn on Disposal. This will allow the water pressure to possibly remove object. Let’s start there. Keep us posted. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@kimberella21052 жыл бұрын
I think I have the same leak and I have to fix it . Thanks for posting
@DIYwithMichaelBorders2 жыл бұрын
Hey Kimberly, thanks for watching. We are always here to help answer questions. Keep us posted, welcome to the DIY Raptor Club. 😎👍🔧🔩
@T10LawnDart8 жыл бұрын
Awesome! Thank you for this video, this is exactly what happened to mine!
@DIYwithMichaelBorders8 жыл бұрын
Hey very cool, glad it helped. Thanks for taking a moment and sharing your comment. Subscribe to the channel if you're up to it. Thanks again!
@Mbs19799 жыл бұрын
Great and simple explanations. Why pay a plumber $80-$100 bucks to do this? Thanks for the video.
@DIYwithMichaelBorders9 жыл бұрын
+mark shimala You are the man! I definitely agree.....Im glad it helped :-) If you want, Sub to the channel, thanks again!
@fatheranalyze53733 жыл бұрын
Definitely worked and saved me $$$ thank you
@DIYwithMichaelBorders3 жыл бұрын
Very cool & saving $$ is great. We appreciate you watching. Enjoy your night. 😎👍🔧🔩
@fatheranalyze53733 жыл бұрын
@@DIYwithMichaelBorders thank you very much
@DIYwithMichaelBorders3 жыл бұрын
@@fatheranalyze5373 😎👍🔧🔩
@anp8145 жыл бұрын
Thanks for the info!
@DIYwithMichaelBorders5 жыл бұрын
Amanda Nicole Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
@MikeyBizzle4Shizzle3 жыл бұрын
Just bought a house turns out they didn’t use screws to fit and tighten the bracket now I have a small leak at the top of the disposal
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. That’s no fun. Keep us posted on your project. Congrats on the new house! 😀 Enjoy your night. 😎👍🔧🔩
@johnmal59755 жыл бұрын
Good info. however would like to see the actual process in action!
@DIYwithMichaelBorders5 жыл бұрын
John Mal Thanks for watching John, below is a link to our video that shows more on this Disposal. You may find this video helpful. 😀 kzbin.info/www/bejne/oXyvkKmdrNmFbJI Let us know if you have any questions, we really enjoy helping out our fellow DIY’ers. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again John! 😎👍🔧🔩
@Bobby84517 жыл бұрын
Yeah I'm getting rid of mine and just installing straight pipe. I'm done dude. Never used it anyway.
@DIYwithMichaelBorders7 жыл бұрын
Bobby8451 Thanks for watching the video. Let me know how it goes. I remember living in an apartment years ago and we didn't have a garbage disposal. I guess the less you have...the less can go wrong right . Please Subscribe to the channel and turn on your KZbin notifications that would be awesome 😎👍.
@nhattuygiaithiensaunguyen98856 жыл бұрын
very good help thanks
@DIYwithMichaelBorders6 жыл бұрын
Nhattuygiaithiensau nguyen Awesome Awesome thanks for checking out the video and sharing your comment. We are glad the video helped! Let us know if you have any additional questions along the way we are here to help! We have lots of videos that you can definitely benefit from. Below is a link to our Appliance/Home Repair Video PlayList...it is filled with “Around the house” repairs....from garbage disposal repairs...washing machine repairs...Smoke detectors...and lots more. Definitely check it out. kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again 😎👍🔧🔩
@paulwkochjr69185 жыл бұрын
Missed what was done with the black rubber seal ring.
@DIYwithMichaelBorders5 жыл бұрын
Paul Koch Thanks for watching Paul. The ring serves as a support ring & we apologize for not showing it reinstalled. We should have ... now looking back on it. As you remove your brace, pay extra attention to the ring to be better familiarize yourself with how it will go back on. Hope this helps. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@TOMMYHAWK774 жыл бұрын
Very helpful. Thank you!
@DIYwithMichaelBorders4 жыл бұрын
TOMMYHAWK77 Thanks for watching, you are very welcome. Glad it helped. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@johnschirrippa91284 жыл бұрын
Perfect. Thank you.
@DIYwithMichaelBorders4 жыл бұрын
John rippa What’s up John, thanks for watching! You are very welcome! Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@CaramelQT4203 жыл бұрын
Can u please say how u clean the excess putty in the sink part on top
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & most people will carefully peal the excess putty off after properly setting parts in place. Keep us posted on your project. 😎👍🔧🔩
@CaramelQT4203 жыл бұрын
Thanks alot...getting my putty. I'll keep u posted. You just saved me from wasting valuable money during this hard time. Bless you.
@DIYwithMichaelBorders3 жыл бұрын
@@CaramelQT420 You are very welcome & us DIY’ers need to stick together. Enjoy. 😁👍
@KoBeezy3 жыл бұрын
Great video, helped a ton
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & we appreciate that. Welcome to the DIY Raptor Club. Enjoy your day. 😎👍🔧🔩
@calderonjd30 Жыл бұрын
Do I need to let the water run for a while after changing filters? Or can I just use it right away?
@DIYwithMichaelBorders Жыл бұрын
Thanks for watching, what filters are you referring too?
@calderonjd30 Жыл бұрын
@@DIYwithMichaelBorders the RO filters the white and blue cylinders
@DIYwithMichaelBorders Жыл бұрын
@@calderonjd30 Thanks for the reply. For our specific system, the instructions state to have faucet open for 24 hours. After 24 hours, close faucet and allow system to pressurize. 😎👍
@calderonjd30 Жыл бұрын
@@DIYwithMichaelBorders I have the same one you have. With the 2 blue filters and the white one
@DIYwithMichaelBorders Жыл бұрын
@@calderonjd30 Awesome. Below is a link to our Reverse Osmosis Playlist. kzbin.info/aero/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov It contains several helpful videos on this system. 👍
@davidscheetz53348 жыл бұрын
Great!!! Just what I needed! Thank you!
@DIYwithMichaelBorders8 жыл бұрын
+David Scheetz Hey there thanks for viewing! Hopefully this helped!! Subscribe to the channel if you're up to it, thanks again!!
@alassanekane42697 ай бұрын
Thanks a lot
@frankpichardo52997 жыл бұрын
I was looking to fix an internal leak, it comes straight out of the bottom base.
@DIYwithMichaelBorders7 жыл бұрын
Frank Pichardo Thanks for checking out the video and sharing your comment and experience. Once the unit begins to leak from the bottom....it's best to replace the entire unit. You will run into far too many issues once that begins. Keep me posted. Please Subscribe to the channel that would be awesome thanks again 😀👍
@bill157376 жыл бұрын
DIY With Michael Borders n
@RoxanneNapolitano9 жыл бұрын
Great video - well lit so I can actually know what I'm looking for! I'm off to get the flashlight to get a better look....oh, what a mess down there last night! :-/
@robertbagio82505 жыл бұрын
But if it leaks from the bottom the whole disposal need to be replaced with new one
@DIYwithMichaelBorders5 жыл бұрын
Robert Bagio Thanks for watching & its best to just replace entire Disposal if it’s leaking from the bottom. Below is a link to our video that shows & talks more about the Disposal brand we like & recommend. Definitely check it out! kzbin.info/www/bejne/ap-xkmyHd6mfq7M Hope this helps! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@hateroc19148 жыл бұрын
This was so helpful!!! Thank you!!!
@tlandin18 жыл бұрын
Cheers for the help mate!!!
@DIYwithMichaelBorders8 жыл бұрын
Thanks for checking out the video. Glad to help...Subscribe to the channel if you're up to it thanks again! 👍
@guyzo5404 жыл бұрын
if I plug the hose that goes from the garbage disposel to the dishwasher am I gonna have problems?
@DIYwithMichaelBorders4 жыл бұрын
Guyzo Thanks for watching & we hope the video helped. We are assuming you’re removing your Dishwasher all together...?? If yes, you can purchase caps for this project to properly & safely seal off the Dishwasher drain hole. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@guyzo5404 жыл бұрын
@@DIYwithMichaelBorders no. I don't use the dishwasher ever and the hose wont stay connected in the back of it so im just disconnecting it. thanks for the reply
@DIYwithMichaelBorders4 жыл бұрын
Guyzo Thanks for the reply & it makes sense to remove hose & cap it off if dishwasher is not being used anymore. 😎👍🔧🔩
@kamalaferchich77999 жыл бұрын
thanks for the video! very helpful
@DIYwithMichaelBorders9 жыл бұрын
+Kamal Aferchich Hey very cool, thanks for viewing!
@bamboojelo38973 жыл бұрын
i can’t go through this part . 1:15 How can I remove the ring?
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching. We used a flathead screw driver. The bracket will need to be rotated to loosen. Keep us posted. 😎👍🔧🔩
@matthewfesler37005 жыл бұрын
thank you for the video. It was very helpful!
@DIYwithMichaelBorders5 жыл бұрын
Matthew Fesler Thanks for checking out the video Matthew! We are so glad the video helped! Let us know if you have any additional questions along the way, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩 Also...below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can definitely benefit from...including additional videos on Garbage Disposal MX. Definitely check those out! kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii 😎👍🔧🔩
@suyogv56316 жыл бұрын
Will plumping tape work instead of plumbing putty? Help
@DIYwithMichaelBorders6 жыл бұрын
Suyog Valsangkar Thanks for watching! That’s a good question & it really comes down to where exactly you will be using the tape. As always if the garbage disposal is leaking from the bottom seal it’s basically time to replace the entire unit with a brand new one. There are however friendly places on the Disposal that you can use plumbers tape however we recommend leaning more toward a more secure seal given by hose clamps ... Hope this helps! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩 Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...we cover lots of leaks & repairs. kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
@suyogv56316 жыл бұрын
DIY With Michael Borders thanks for the tip I just found out there’s water leaking from the bottom but not from a hole. There are two machine cut incisions at the bottom where the water is coming out from. Thanks for replying so fast great vid btw
@DIYwithMichaelBorders6 жыл бұрын
Suyog Valsangkar Thanks for the reply! What’s your thoughts? Are you looking into purchasing a new Disposal at this point?
@suyogv56316 жыл бұрын
DIY With Michael Borders well I probably would and my insurance would cover it but if it can be fixed by removing something clogging up the unit then I would rather do that because this disposer still has about 1-2 years more of service left
@DIYwithMichaelBorders6 жыл бұрын
Suyog Valsangkar Very cool..definitely worth keeping it if you can stop the leak! Keep us posted! 😎👍
@scottisom709 жыл бұрын
very good video, just needed helper to hold camera when removing/resetting snap ring, and when actually removing and replacing disposal. those were my most challenging areas without proper instruction. good job though
@DIYwithMichaelBorders9 жыл бұрын
+Scott Isom Thanks for viewing, those are definitely the hard steps....How did it turn out?
@dustinlassuy7 жыл бұрын
Thanks I think that is my problem.
@DIYwithMichaelBorders7 жыл бұрын
Dustin Lassuy Very cool thanks for checking out the video Dustin. Keep me posted and let me know if you have any questions. Please Subscribe to the channel that would be awesome 😀👍
@gloriaalcaraz32948 жыл бұрын
my disposal is leaking from underneath, any suggestions on how to fix it?
@DIYwithMichaelBorders8 жыл бұрын
Thanks for viewing and commenting. Leaking from the bottom indicates possible symptoms of internal damage to the parts as well as the main plastic shell or case that houses all parts. In the past...leaking from the bottom is signs leading to replacing the entire unit as a whole. After you get the new one installed you will be extremely happy with the new update...you will no longer be poring money into the old unit. Let me know what you do...Subscribe to the channel if you're up to it. Thanks again! 😀
@andreiascalzo2 жыл бұрын
My is making a sound when turned on but it is not working, what can I do?
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. Let’s get this figured out. You may have a jam. 1st thing to do is unplug garbage disposal and cut all electrical power to the unit. Next, you can use the jamming tool or the proper size hex key to un-jam disposal. Below is a link to our video showing this. kzbin.info/www/bejne/oXyvkKmdrNmFbJI Next, check to ensure that your lower breaker is pushed in. Below is a link to our video showing this. kzbin.info/www/bejne/hWW1g5h_hceln5I Please keep us posted. 😎👍
@armandolopez58884 жыл бұрын
it is helpful but mine is lesking when i turn it on, so the leak is in the device
@DIYwithMichaelBorders4 жыл бұрын
Armando Lopez Thanks for watching & we hope you enjoyed the video. Once your disposal begins leaking from the bottom, it’s best to replace old disposal with a brand new disposal. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@wilsonw79564 жыл бұрын
Where do u buy the oring seal?
@DIYwithMichaelBorders4 жыл бұрын
wilson W Thanks for watching. New O-Ring can be purchased from Ace, Lowe’s, or Home Depot. Keep us posted. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@marcsworld1love4 жыл бұрын
The flange was leaking, not the garbage disposal, but good video. 👍
@DIYwithMichaelBorders4 жыл бұрын
Marc Treiser Thanks for watching Marc. A worn out flange will definitely do it. Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@patthemaniacful6 жыл бұрын
Thank you!!!!!
@DIYwithMichaelBorders6 жыл бұрын
patthemaniacful You are very welcome & we want to thank you for watching & sharing your comment. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome. Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...definitely check those out. Thanks again! 😎👍🔧🔩 kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
@alicetrujillo36874 жыл бұрын
it left off put back the ring that you took off with the screwdriver
@DIYwithMichaelBorders4 жыл бұрын
Alice Trujillo Thanks for watching, hope the video helped. 😎👍🔧🔩
@Patriot36658 жыл бұрын
Thanks for posting
@DIYwithMichaelBorders8 жыл бұрын
Hey thanks for viewing and leaving a comment. I hope it helped, Subscribe to the channel if you're up to it, thanks again!
@grrmtthgrrmtth30003 жыл бұрын
Thanks
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. Let us know if you have any questions, enjoy your day! 😎👍🔧🔩
@_rmaze_quiambao52157 жыл бұрын
Thought I'd come here to save a few dollars. Realized halfway through the video, I'm no plumber...
@DIYwithMichaelBorders7 жыл бұрын
Thanks for checking out the video! What exactly are you experiencing with your unit? If leaks...have you narrowed down the leak point? Subscribe to the channel that would be awesome! Thanks again!
@_rmaze_quiambao52157 жыл бұрын
The leak is coming from the pipe connected to the disposal. Started when my washing machine still had water in it after I finished a load. (other words, it didn't drain all the water out of the machine because it was backed up) It might be a clogging issue as well somewhere in the house. I saw the "plumbers putty" in the video and immediately got intimidated. It's funny. There was a plumber next door that very day at my neighbor's. I'm thinking she's having the same problem. Thanks for the help. I've subscribed. =)
@DIYwithMichaelBorders7 жыл бұрын
_rmaze_ Quiambao 😀 very cool! Is it leaking from the rubber hose or the hard tube below the rubber hose? You might just need to tighten your clamp with a screw driver. Thanks for Subscribing ! 😀👍
@_rmaze_quiambao52157 жыл бұрын
Now there's an idea! I think I'll try that. Appreciate it!
@godfreywoelk75986 жыл бұрын
Thank you for this informative video!
@DIYwithMichaelBorders6 жыл бұрын
Godfrey Woelk Thanks for checking out the video! We are so glad the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩 Also...below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can definitely benefit from...including additional videos on Garbage Disposal MX. Definitely check those out! kzbin.info/aero/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii
@thesultanmerchant7 жыл бұрын
you mentioned verbally but did not show practically how garbage disposal is disconnected which is very important part for lay person.
@DIYwithMichaelBorders7 жыл бұрын
Thanks for checking out the video. Thats a good point. This video is primarily focused on leak detection.
@stephenperez78036 жыл бұрын
Thank you!
@DIYwithMichaelBorders6 жыл бұрын
Stephen Perez Thanks for watching Stephen. Hope the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩
@WhizeCracker3 жыл бұрын
You did a great job until we went under the sink and you showed everything from the paper gasket to the snap ring in place. You skipped plenty of steps for me to give the 230th thumbs down. I know those steps now but not from this video...
@hateroc19148 жыл бұрын
This was so helpful!!! Thank you!!!
@jdrumz321ify3 жыл бұрын
What if its leaking from the bottom??
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. That’s a tough call...🤔 We always recommend purchasing a new disposal if it’s leaking from bottom. Keep us posted on your project. Below is a link to our video showing our new disposal. kzbin.info/www/bejne/ap-xkmyHd6mfq7M 😎👍🔧🔩
@ohskunt17 жыл бұрын
thanks
@DIYwithMichaelBorders7 жыл бұрын
jimmy chungah Awesome I'm glad it helped. Thanks for checking out the video and sharing your Thanks 😀 We would love to have you as a subscriber Thanks again!
@pastorjosh444 жыл бұрын
Thank you!
@DIYwithMichaelBorders4 жыл бұрын
pastorjosh44 Glad to help & we appreciate you reaching out to us. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@jessepoopoo4 жыл бұрын
I wish you touched on how to do the wiring
@DIYwithMichaelBorders4 жыл бұрын
jessepoopoo Thanks for watching & we hope the video helped. We unfortunately didn’t touch on wiring in this video. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
@shoresbound7 жыл бұрын
The most important part of the re-assembly where the flange at the bottom that is mated to the top part got skip. ( The ring , re-tightening of the bolt, etc.). I can figure it out, but this is suppose to be a detailed instruction so just a little bit to be desired. But, thanks anyway, I can figure it out from here.
@DIYwithMichaelBorders7 жыл бұрын
Thanks for checking out the video and sharing your comment. Definitely will help our future viewers. You Rock :-0 Please Subscribe to our channel....that would be AWESOME.