If interested in purchasing this product, visit or Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3ZcUGfE 😎👍
@Project_EG24 жыл бұрын
Great video. Also check the throttle cable as it can stick/stretch over time. All you’d have to do is tighten the tensioner that most cars have from that time.
@DIYwithMichaelBorders4 жыл бұрын
Malik Awesome & thank you. We really appreciate you sharing your advice. You Rock. This will be helpful to future viewers. Us fellow DIY’ers need to stick together. Many more helpful videos to come. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again! 😎👍🔧🔩
@empressironbladder89424 жыл бұрын
I love your calming voice. I always get ripped off as a single lady going to go get my car fixed. Stressful. At least here in this well made video, it’s easier to understand what to do first, before I go into the auto robbers.
@DIYwithMichaelBorders4 жыл бұрын
Empress Iron Bladder Thanks for watching & we appreciate you sharing your thoughts. Unfortunately auto robbers have caused lots of heart aches for many...not cool! Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@kalebmountz1303 Жыл бұрын
Jeesh, I though I was reading the start to a romance novel
@الإسلامهوالتشيع3 жыл бұрын
I have a kia rio when walking, it gets heavier whenever the tire is pushed...what is the reason
@limadu6714 жыл бұрын
My issue is that the gas pedal does not spring back up, because the mechanism that’s in the small box that’s next the battery (looks size air filter box but 5 times smaller) is sticky and does not move freely). The operation is similar to the one near the throttle body. Wondering if someone can tell me the name for that. Wondering how I can lubricate. Used of pb blaster, but not good enough. The throttle body has been cleaned.
@DIYwithMichaelBorders4 жыл бұрын
Li ma Du Thanks for watching & we hope it helped. The Brake Booster is the circular unit with vacuum lines & Master Brake Cylinder attached to it (MBC). The MBC has the brake fluid reservoir attached to the top. Hope this helps. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@limadu6714 жыл бұрын
DIY With Michael Borders. I was probably not clear. My issue is not with the Brakes. It about the gas pedal and throttle.
@DIYwithMichaelBorders4 жыл бұрын
Li ma Du Thanks for the reply. Have you cleaned the internal portion of the Throttle Body. Keep us posted. 😎👍🔧🔩
@limadu6714 жыл бұрын
Thanks for ur reply. I did clean the throttle body. The part that I was talking about is just next to the battery. Trying to attach a picture but unable.
@limadu6714 жыл бұрын
Yes the throttle has been cleaned and moves smoothly.
@garyjennings5052 жыл бұрын
Smh it was my floor Matt
@gmailgmail83265 жыл бұрын
Sometimes the cause of the metal wire is the gasoline pedal
@DIYwithMichaelBorders5 жыл бұрын
thepree pree Thanks for watching & we hope the video helped. We appreciate you sharing your thoughts. 😀👍 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@lupeverarodriguez4385 жыл бұрын
All car or just that one
@DIYwithMichaelBorders5 жыл бұрын
Lupe Vera Rodriguez Thanks for watching, great question. This will refer to an extremely large number of vehicles on the road today. Keep us posted with any questions you may have. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@red_devil175 жыл бұрын
but what if i already clean the throttle body, is it the cable adjustment? mine is kia rio 2008
@DIYwithMichaelBorders5 жыл бұрын
Ronnel Niango Thanks for watching & sharing your question Ronnel. It’s possible that your cable mount may need a little lubricant as it is constantly shifting back & forth as the gas pedal is pressed & released. It’s not the most common cause however we shouldn’t rule it out. You may just need to continue cleaning your Throttle Body as it may be really clogged & filled with gunk. Keep us posted, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@caddi703 жыл бұрын
Same problem on 70 Impala, so it didn't help me. Lol
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching, hope the video helped. Enjoy your night. 😎👍🔧🔩
@SquintymasterV3 жыл бұрын
Bruh my dumass thought there was something wrong then i watched your video and turns out the only thing wrong is with me, realized i cleaned my car a week ago and forgot to tighten my carpet so it was under my pedal lmfao thanks
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. So happy to hear it was a friendly fix. 😀 Us fellow DIY’ers need to stick together. We are always here to help answer questions. Enjoy your night. 😎👍🔧🔩
@joelquaintance902510 ай бұрын
A dirty air filter has NOTHING to do with a sticking throttle cable; your video was almost a waste of time.
@NavinJohnson_thethird3 жыл бұрын
My friend had an issue with his 1993 Ford Aerostar XLT. I had to move his vehicle at work and the gas peddle was so incredibly difficult to press down that I was in shock to find out that his 83 year old wife who was the original owner had been driving it for years with the gas pedal barely able to move. I told my co-worker that his wife must have legs of steel because it was driving me insane. I eventually bought the van from him with the intention of fixing several things, including the gas pedal. I came across your video and I quickly went to work and discovered the throttle body was caked in carbon. After a few minutes of spraying and using a bottle brush, I managed to clean out the throttle body. I vacuumed the bits of the bottle brush back out and then repaired the air intake tube with friction tape to seal the accordion cracks and I killed to birds with one stone. The V6 Aerostar runs better than it has in decades and I only paid $800 for the van. Thank you!
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. We really appreciate you sharing this. It’s great to hear you cleaned it out & the pedal is operating normally. Great job & it sounds like you got a friendly deal on the car as you are going to do some DIY things to it. Hope all is well. Enjoy your night Chris. 😎👍🔧🔩
@aldousbrawndo9964 жыл бұрын
Rubber floor mat was in the way lolol. Thanks for this video.!
@DIYwithMichaelBorders4 жыл бұрын
You are very welcome. Thanks for watching Mark. 😎👍🔧🔩
@vickysaginy61153 жыл бұрын
Lol
@xxn1ghtw0lfxx533 жыл бұрын
Bro LITERALLY FUCKING SAME THOUGHT MY CAR WAS FUCKED
@stix_and_bones3559 Жыл бұрын
I have a 2008 crown vic police interceptor, and accelerating from a stop my gas pedal will pop a little bit and it's slightly delayed, not really sure how to explain it. But for the last 3 months I've had a throttle issue and at one point the car went into limp mode and stayed that way for about a month. My battery died about a month after the CEL came on reading about 6 or so codes all related to throttle, and after the battery died, it reset the CEL. It's been about 2 weeks and it has not come back on. However, now I'm having an issue with my gas pedal acting really strange. If anyone has any ideas, tips, or advice please let me know!
@DIYwithMichaelBorders Жыл бұрын
Thanks for watching, have you cleaned throttle body intake?
@thedeal15884 жыл бұрын
So my gas pedal was fine until I cleaned the throttle body? Now my gas pedal is hard to press? What could it be?
@DIYwithMichaelBorders4 жыл бұрын
The Deal Thanks for watching & we hope the video helped. You may have a small glob of grime still in there. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
@Churmaori983 жыл бұрын
I'm having the same problem in my mitsubishi galant, did you find the solution?
@slammedb18a16 ай бұрын
Am I the only one not seeing these links he's talking about floating around? 😕
@DIYwithMichaelBorders5 ай бұрын
Thanks for watching. The links are still properly positioned, we just checked. Which video are you looking for, we can attach a link in the comment section. 👍
@poutahidis6 ай бұрын
Carpet was on the way 😅 Thanks man, sometimes you just need a second pair of eyes, or brain even
@DIYwithMichaelBorders6 ай бұрын
Good morning ☕️ you are welcome. 😁👍
@djjohn17144 жыл бұрын
The kickdown cable on my 97 caravan has aloot of play could this cause slow acceleration and when i put my auto trans into the 1st gear the gas pedal is hard as a rock but in neutral it doesn't do that
@DIYwithMichaelBorders4 жыл бұрын
Dj John Thanks for watching & we hope the video helped. It’s very possible that this is causing your issue. Maybe a quick DIY cleaning will solve your problem. Keep us posted. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@ldawg76744 жыл бұрын
Just happened to me in my 78 cutlass.... Scary shit
@DIYwithMichaelBorders4 жыл бұрын
tha Reaper Thanks for watching, hope the video helped. 😎👍🔧🔩
@steven923923 жыл бұрын
So um my matt was in the way. 🤣
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & sharing your experience. Welcome to the club...it has happened to all of us...😁 Hope all is well. Enjoy your day.
@toniomle80123 жыл бұрын
Mines too lol
@DIYwithMichaelBorders3 жыл бұрын
@@toniomle8012 😎👍
@Palacemalicee4 жыл бұрын
Dude thanks for this video. I’m super embarrassed but we called our mechanic telling him we had issues with the gas pedal not working properly. Watched this, sure enough it was the mat stuck under the pedal. Thank god we didn’t bring it in, called him back telling him my buddy fixed it lol.
@DIYwithMichaelBorders4 жыл бұрын
Realest Reviews Welcome to the club. We have all had that experience. 🤣 We appreciate you watching. Let us know if you have any questions. 😎👍🔧🔩
@elinolasco10192 жыл бұрын
Hehe, It was definitely my floor mat. 😅
@DIYwithMichaelBorders2 жыл бұрын
Good morning, thanks for watching. A little adjustment with the floor mat is a friendly DIY project. 😁👍
@RusYTable5 жыл бұрын
Thank you so much Mike !! I was doubting my 16 year old car is failing but when I took the first step I found out there was the culprit!! lol How dump is this? But you are very meticulous enought to show us that !! Although I have cleaned the throttle body myself but I have not replaced the engine filter for roughly a year and a half. So this video also serves a reminder for me to replace it as well!!
@DIYwithMichaelBorders5 жыл бұрын
Rus P Thanks for watching & sharing your comment, we really appreciate it! We are happy to hear the video helped. A clogged Air Filter will definitely lead to degraded engine performance. Most people replace Air Filter during every other oil change. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@rag4129 Жыл бұрын
I i am having a problem where my gas pedal seems to stick at the top however it will only happen at speeds of 90 or more.
@EnglishhintsMohamedAbdelrehim Жыл бұрын
I have a very strange problem.. when the gas pedal goes hard the brake pedal goes hard to at the same time and the opposite is true .. the moment I feel one soft the other one is soft too .. i cleaned the throttle , new plugs , new air filter ... strange problem could u tell why please I have a lexus es 300 2002
@SummerEaze7 ай бұрын
Having this same issue! Loss of power during acceleration after that. & overheating
@prathikshshetty9458 Жыл бұрын
Can a brand new car have dirty throttle body
@DIYwithMichaelBorders Жыл бұрын
Thanks for watching, anything is possible…especially if the car sat un-driven for a long time.
@christianfuhrmann56475 жыл бұрын
I have a 1992 ford mustang that has a really stiff gas pedal when i try to barely push it in.
@DIYwithMichaelBorders5 жыл бұрын
Hope Wizard Thanks for watching & we recommend following these friendly steps & cleaning your Throttle Body. This may result in a significant increase in pedal efficiency & Throttle Body performance. Keep us posted. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@justinmoore2343 жыл бұрын
My Mazda does it from a dead stop if I try to just smoothly inch it forward I have to use force and then it chirps the tires
@fenrir96732 жыл бұрын
Is it safe to drive it like that? Cause mine is hard but it does acelérate well enough to get me to my destination. I want to know cause I might need to buy a cleaner first.
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & depends on who you ask. We recommend cleaning your Throttle intake ASAP to alleviate any chances of it causing any issues while driving. Please keep us posted on your project. 😎👍
@ronaldflamingo87113 жыл бұрын
What if my WJ's gas pedal doesn't spring back/is stuck in the pushed down position?
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. This happens when you have a damaged Throttle Return Spring. Replacing this spring will get you back up and running. Please keep us posted. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
@juanvelaz8971 Жыл бұрын
Hello fellow wj owner lol no surprise finding you here