My ghetto-built '95 Ford EF Fairmont Turbo 4.0 | Build Breakdown!

[@13illyxmaze]

Damn that looks so good with that front bar, honestly think the Ef is underrated. Probably my favourite looking falcon

[@Late-Night-Nate]

Thanks man!! The EF/EL is super underrated i think also, awesome base to start with and so much potential for upgrades!💯

[@13illyxmaze]

@@Late-Night-Nateyeah for sure, keen to see you do more work on it and the interior colour combinations looks good man!

[@RWB1111]

Definitely keen on this build

[@shawnmendez5937]

These single cam 4L have a part in my heart forever

[@Late-Night-Nate]

Likewise mate! Old technology, but still such an easy motor to work on and can be a bit of fun with some simple upgrades!

[@Den-wu3yb]

Recently bought an EL wagon classic and I enjoy it more than my fg turbo, such solid cars

[@Late-Night-Nate]

Good stuff mate! The old e-series Fords sure do have a lot of character👌🏼

[@hamishfullerton7309]

Interesting set up and history, love to see it drive 😊

[@nocrustinc.2725]

Followed for years my bro, wu-tang for ever 👐

[@Late-Night-Nate]

Cheers brother! Appreciate that comment!👐

[@antonpetersen3183]

Badd bro!! First turbo sohc i seen back in the day when i started getting into e series

[@Late-Night-Nate]

Churr my toko!! I think AN6RYB is up next for a lazy turbo conversion, surely get the old girl making some sututu noises 👀😅😅

[@antonpetersen3183]

​@Late-Night-Nate you'll need to debut it on your channel when I do a give little page for donations for a turbo kit 😂😅😅

[@andrewtavendale5838]

I've been a born if holden pusher aka skid pigs vn/vp recently moved into the falcons..the turn was searching for a v8 for my collection ..eyes got opened when u was informed the ba wasn't a lawn mower specd 4.0l ..lol quad cam v8 hmmml. Couple years later a half dozen falcons now sit in my driveway..family grows and kids want the falcons sooo we learn how easily they're modified for performance ..

[@Slater-rh1qr]

Love all fords nice man!

[@YarranReed]

prolly the best looking ef interior on the internet

[@Late-Night-Nate]

@YarranReed Cheers dude! It's not too bad for a very quick and easy upgrade to be honest, makes it look a bit more modern and less boring at least😅

[@Johnzyboi5600]

Dope drop man! Coming from South Australia! Made me regret now that I sold my el!!!! But love the content

[@Late-Night-Nate]

Cheers brother!! I don't think i could ever part with any of my E-series as much as I say I want to sometimes hahaha, I'd have the same regret no doubt😅

[@Johnzyboi5600]

Yeahhhh nah , I’m gonna chase down another e series now hahaha they handle not to bad also Very underrated !

[@iRidetas]

sick! really enjoyed the build break down, can you do more please mate!

[@Late-Night-Nate]

Thanks mate, appreciate the comment! Will definitely have more on the way👍🏻

[@maelradec6766]

That rear window visor is called a HIC Rear Window Roof Spoiler. from an au or ba.

[@barraboy03]

Love how u did trim bro very nice 👍

[@Late-Night-Nate]

Cheers dude!🍻 Even i was surprised at how it turned out 😅

[@alexearnshaw1468]

Holy crap never knew you had so many fords bro

[@Late-Night-Nate]

Just a couple...😅

[@HotForgeChaos]

Man it has been a hot minute since I've seen the old menace

[@Late-Night-Nate]

Just a tad lol, thought I better put some content out on it before I forget it even exists😅

[@Dunnieltd]

Nice one man, you've done a good job on it, so mamy cars now ha.good to see ya still have them all

[@Late-Night-Nate]

Cheers brother! I think that's part of the reason why it's never really got the attention it deserved hahaha, kept buying car after car and this just got pushed to the side😅. Hopefully get stuck back into the EF turbo soon!

[@aussieausdeutschland4245]

As a fellow E series owner, 🤟😁👍 mad build

[@Late-Night-Nate]

Cheers man!! Good to hear there's so much love for the E-series Ford's💯💯

[@andrewtavendale5838]

We'd like to see mafia style port matching or mild grooming of ports .it's a massive interest of mine 😊

[@Late-Night-Nate]

Will have some content on DIY porting coming in the next few weeks. I've done a couple 4.0 sohc heads over the years, but now have a couple sets of Ford V8 heads and intake manifolds that need some touching up very soon!

[@alberttovio2762]

Ooooosh i got a green EL love a set up like that

[@michaelbyrnes7944]

You definitely know your stuff love the set up and the sound she puts out sounds mean

[@Late-Night-Nate]

Cheers man, appreciate that comment!💯💯

[@vr4gotti]

Keep the videos coming bro build breakdowns on friends cars

[@JasonCarlton-ne1gl]

Awesome vid man, definitely keen to see more on this, the OG! Keep it up, love the vids!

[@Late-Night-Nate]

Cheers bro! Will definitely have more build breakdown vids on the way. Hopefully the EA will be up next, just need to decide whether to keep it or flick it on🤔👀😅

[@andrewr1084]

Solid work Bro, we need more! Pretty sure ive been to Mexico too! 🤭

[@Late-Night-Nate]

The back streets of Mexico is where it all starts for car guys☝🏼👀😂😂😂. More content on the way soon!💯

[@jamesblack683]

Nice bro.i have same wheel and tyre set up on my ea wagon.keep the content coming

[@Late-Night-Nate]

Cheers brother! That'd be a mean looking wagon, the wheels must fill the gaurds up mint👌🏼

[@jamesblack683]

@Late-Night-Nate yeah bro looks aggressive az haha I've got leaf springs in the rear with blocks and rubs hard but but have another set of leafs which I plan on taking to archers in rotorua to get them to add a leaf and stiffen it up. You wouldn't happen to have any manual set ups for a e series or barra? Cheers

[@Late-Night-Nate]

@jamesblack683 that's the one bro! Couple extra leafs should sort that problem out 👍🏻 Haven't got any manual conversion for an E-series yet. I've got 99% of an AU manual conversion (missing driveshaft) but holding onto that for a future AU build hopefully hahaha

[@jamesblack683]

@@Late-Night-Nate to good bro 👍

[@Adz082]

Dude, you must have nuts the size of grapefruits u got the deepest voice haha this is my first vid subbing in Perth 👌🏻

[@Late-Night-Nate]

Hahahaha, this comment made my day, thanks mate!!😂😂😂

[@evolveausevolveaus]

Using benders finger pointer 😂 Tuff build lad. Falcon power !

[@Late-Night-Nate]

Cheers brother! The finger pointer comes in very handy☝🏼😅😅

[@Adza-78]

Clean her up mate…. Just finishing off my Xg xr6 turbo build on my channel. Keep it up- good content.

[@Henryteratana]

Beautifull fords brother

[@Late-Night-Nate]

Cheers brother!🍻

[@beamup1]

Mean as brother good I came across your channel

[@Late-Night-Nate]

Cheers brother, thanks for checking in!🍻

[@getahanddown]

Rad seeing some kiwis on here

[@Late-Night-Nate]

💯💯🍻

[@andrewtavendale5838]

Maybe do a ghetto build from marketplace on the cheapest to roll a 12 at a drag strip ?

[@Late-Night-Nate]

Would love to do something like that one day, would be a good laugh! A few of the boys I used to go racing with had a similar idea, but to see who could build the quickest car with a max budget of say $5k... never got around to it though😅

[@terryjcowan21]

would look sick with side and rear bodykit, also i think the front grill takes away from how good the front bodykit looks.

[@Late-Night-Nate]

Definitely! Should all tie in nicely once the rest of the kit is sorted. As for the grill, i have a few different options from the standard EF/EL fairmont grills, as well as the Fairlane and LTD variants, so might swap them around from time to time and see which one suits best maybe

[@doxdagee685]

Mean bro looks dope with the 32 front she sounds sikk too any break downs on all the toys mbro

[@Late-Night-Nate]

Cheers brother!! 💯 Will keep the content rolling in!

[@ants.makara]

love the car my brother.. been a ford man myself bro..had the same car living in melbs brother...so would buy it off you if you were selling it😂😂..for my son first car ship to perth...chur brother love the channel keep them vids coming bro chur 💯👀🤙

[@Late-Night-Nate]

@ants.makara cheers my bro!! Appreciate that comment, chur!🤙🏼🙏🏻🙏🏻

[@teeisme4178]

Thats a tough ef mean build bro

[@Late-Night-Nate]

Cheers bro!🍻

[@zacroyle7816]

Love the idea of the au seats, was thinking about getting the valour au Fairmont seats for my el is it difficult to make them work?

[@Late-Night-Nate]

@zacroyle7816 actually, it's surprisingly straight forward to do. Front seats are easy. Just keep the original EL base and rails and swap the foam and fabric over (it just unclips from around the base). The upright part of the seat has 2x bolts on each side which mount it to the base, so you can unbolt those and swap the AU uprights over and that's more or less job done. The rear seat is a little more work, but still easy enough if you have the tools and patience. The AU fold-down uprights just bolts straight in like the EL uprights do, the main difference is they don't use the locking pin from the side bolster to locate - look on the AU and you'll see they have a little loop type bracket that the uprights lock in over. You will need to modify the EL body to mount these brackets and space them out to allow the seats to lock in. The AU side bolsters locate differently also. They still bolt in down the bottom like the EL does, but you will need to make some sort of pin sitting horizontally on the back side of the top part of the bolster to locate into the EL locating bracket. Hard to explain, but when you see the difference between the 2x, you'll know. The rear seat base itself clips in completely different between EL and AU, so you will need the little plastic floor pan inserts from the AU to make this work. I usually just sit the base in there and roughly mark the area on the floor where the AU mounting brackets would likely rest. You'll then need to drill the floor and use a punch to create an oval shape for the AU floor pan inserts to fit into, then the AU seat should just drop right in and the seat and inserts should just clip together. Hope that makes sense!

[@zacroyle7816]

@@Late-Night-Nate cheers mate I appreciate it, yeah all makes sense fronts are always easy apart from going back to eb so I learned😂 rears I knew were completely different as I think the rears are the same as b series?

[@boulevardsound5137]

Ahhh very good!!

[@JoshuaFox-ti1uw]

Bro take my money that's mint

[@Late-Night-Nate]

Cheers bro!🍻🍻

[@vtech7457]

Fk that looks tuff ASF brother....solid Mahi!!

[@Late-Night-Nate]

Cheers brother, much appreciated!🍻

[@michaelsutton8937]

Chur bro . Nice EF Bro.

[@Late-Night-Nate]

Cheers bro!🍻

[@fiat1245]

Hey mate who did you get to build your high stall needing one for my au xr8 soon Cheers Casey

[@Late-Night-Nate]

I had my stall built by A Automotive, over in the North Shore, Akl. Give them a call and they should be able to help 👍🏻 www.aautomotive.co.nz/repairs-rebuilds/torque-converter-rebuilds/ Just keep in mind, the higher stall RPM can cause the stock ecu to go into Limp mode (ecu thinks the trans is slipping excessively) so you will either need a J3 chip or flash tune to increase the limp mode stall RPM or use one of the Hi-stall Limp mode bypass modules that Shiftkits.com.au sells

[@fiat1245]

@@Late-Night-Nate thanks heaps Nate and keep pumping out the videos really good to watch!

[@Late-Night-Nate]

@fiat1245 No worries man, hopefully they can sort something out for your XR8. Thanks also, will be sure to keep the content coming!💯

[@preemz45]

Dope watch

[@fu8713]

Do a GTHO XY bruv 🤙🤙

[@jikasei_jutsu]

Found your channel from Instagram bro 🤝🏾

[@Late-Night-Nate]

Awesome, thanks for checking in bro!💯💯

[@jamesthebond0072]

Didnt see a link for the front bumper

[@Late-Night-Nate]

www.aerotech.co.nz/ 👍🏻

[@maniauruahugreen9005]

I want to do this to my ed 😅

[@egmontsliders2434]

Surely the Ea gets some attention soon

[@Late-Night-Nate]

Hopefully soon!! It's been sitting far too long, would like to get it running nice and try get it on the road

[@person13456]

hey mate wondering your opion on commies and whats the best suspenion for them cheers

[@Late-Night-Nate]

@person13456 i'm probably the worst person to ask cause I have absolutely zero idea when it comes to anything Holden🤣🤣. I don't mind them though, actually a bit of a fan of the VR/VS shape which is around the same year model as most of my Ford's. Would love a VS Statesman or Senator with a 355 stroker one day!

[@lowbrolevz2446]

🔥🔥🔥

[@sl_yy3573]

whats the front bumper you use?

[@Late-Night-Nate]

It's a fiberglass bumper made by Aerotech here in NZ. Basically a mash-up of EF/EL Fairmont with the Nissan R32 GTR style

[@elijahtheprophet963]

Clean 👌

[@EdmundSampson-pd7vi]

Listen to me, you need a GTR rearbumper to mesh with front. You need to buy a cheap ebay one and cut and fit it to the EF original bar. It will tie it all together with the xr rails. It will flow. Im telling you man.

[@Late-Night-Nate]

You might be onto something there! I will have a look around and see what we can come up with. It definitely needs something on the rear to match the front and the side skirts im planning to run so hopefully there is something out there i can make work👍🏻

[@EdmundSampson-pd7vi]

@@Late-Night-Nate Ive got a Mazda Bt50 dual cab and I just took the tub off and fitted a rear end off a ford ranger wildtrak. It looks crazy

[@BillsNz]

kiwi with a wu tang hat subbbed brother from Gtown

[@Late-Night-Nate]

Hahaha, cheers bro!! Wu-Tang forever!💯💯

[@BillsNz]

@@Late-Night-Nate instant sub when I seen that bro hahah WU FOREVER 🔥

[@richardtuahine1788]

fark g that thing is gangsta af

[@Late-Night-Nate]

Shot bro!🍻

[@RBFR01]

That would be a sick car if you put a V8 in it and a V8 Supercar body kit from the 90's.

[@Late-Night-Nate]

V8 swap could definitely be on the cards in the future if the turbo 6 starts becoming boring 😅. Always wanted a high-comp N/A 363 windsor stroker with a T56 behind it, but the bank acc balance always says, 'no' hahaha

[@lincolnsthename12]

That's Kang

[@andrewtavendale5838]

And yuh more vids .

[@orangelad]

should have left the bonnet white!! HAHAHAH :P

[@Late-Night-Nate]

I was waiting for a certain someone to leave that comment! 🤣🤣🤣🤣🤣

[@Friedenza]

Channel is mean bro! that bonnet paint job however, is shocking

[@Late-Night-Nate]

Thanks bro!🍻. That bonnet has definitely seen better days😂😂

[@vr4gotti]

Are you on any social media ?

[@Late-Night-Nate]

Yeah bro, I sure am. nate_deez_09 on IG and Tiktok👍🏻

[@vr4gotti]

@@Late-Night-Nate Chur bro just gave you a follow

[@maritimemartin7131]

Fordever

[@TomGill-tr2yi]

Bro.where do.u live

[@Late-Night-Nate]

@@TomGill-tr2yi Based in Auckland NZ👍🏻

[@andrewtavendale5838]

Safe as! Don't bitch about it lolol

[@andrewtavendale5838]

I live in nz ..I'm not bagging bruh just want to say ..had a friend slash Co worker with a s13 much mods rb20 blahblah you know old school missile with stretched tires ....:( rip oleg ..sorry but trying to say looks good but pay a little sense to your stretch

[@critical_unknown]

The guy you're talking about, was he a Russian guy in chch, with the nickname Lego?

[@Late-Night-Nate]

Appreciate this comment!💯💯. Stretched tyres always involves that risk of de-beading and putting stress on tyre sidewalls. I myself with a few others in my circle have similar wheel/tyre combos and never had an issue, but that's not to say it can't happen. RIP Oleg🙏🏻🙏🏻

[@JamesOtoole-e2b]

Hello from Australia 🦘. Mean bro.😁

[@Late-Night-Nate]

Cheers bro!!🍻

[@xxxlude5]

Any vids on the Soarer ?

[@Late-Night-Nate]

Will be some content on that Soarer coming up soon once my sister starts working on it again👍🏻

[@Getsum-ii]

Do you mind i do your bonnet for you? 😆🙈 I currently do panel n paint my car needs doing too but yours will be more satisfying 😂 only issue, must be a hot day so the paint dries nice and that hasn't been happening lately 🥴 not in s.a atleast 🥲 I'll charge you fk all, love fords and love what I do lol 🤟

[@Late-Night-Nate]

Could be a possibility bro! I'm a little while away from having $$ to throw at anything on this build anyways, but definitely would be keen to get it done at some stage. Where abouts are you based?

[@Getsum-ii]

@@Late-Night-Nate I'm in drury my man, the 💰 won't be crazy don't worry haha probably next to nothing but will look 10x better (let me sort some more equipment to make it actually perfect haha) maybe around next video posted might be about that time 👌🏼