My GQ Patrol needs a LOT of work..

Recently, I went on a 4WD trip to Tasmania's West Coast to take on tracks like Lake Cumberland, Climies, Pieman Heads, Sandy Cape, Balfour & $1000 Track & in the process I caused a lot of wear, tear & damage to my GQ Patrol. We have a huge list of jobs to get through including replacing the gearbox, doing the swivel hubs, swapping the wheel bearings, replacing all of the brakes, giving the vehicle a full service, fixing the glow plug system as well as doing a few upgrades to the Warn 8274 High Mount Winch. Let's get this car back up to an acceptable standard.
0:00 Intro
0:33 What needs to be done
3:12 Getting the old gearbox out
8:36 Changing everything over from the old box to the new one
10:01 Putting in the new throwout bearing
10:30 Getting the new box in
13:27 Replacing the GQ steering box with a GU steering box
14:48 Changing oil & oil filters
16:24 Changing fuel filter
18:38 Installing the KOV top hat & GigglePin motor to the 8274
21:28 Checking the swivel hubs & king pins for play that's causing a death wobble
22:21 Replacing the brake rotors & changing the wheel bearings
25:09 Replacing brake lines
28:37 Bleeding the brakes
30:24 Testing the Bendix Brake Upgrade
31:23 Checking the panhard bushes to try chase a death wobble
33:09 Checking the glow plugs & fixing the glow system
36:27 Cleaning the radiator out after the $1000 track
37:53 Outro
Instagram, Snapchat & TikTok: ‪@timmyhasheart‬
Proudly supported by:
www.ultimate9.co
www.superiorengineering.com.au
www.kincrome.com.au
www.roadrunneroffroad.com.au
www.bendix.com.au
Music: www.epidemicsound.com/ & www.artlist.io/

[@MntlMajorkozmo]

"big 32s" im using that next time i get pulled over

[@timmyhasheart]

🤣🤣🤣

[@dean6267]

Hey Timmy never change the style of content, I love the way it is. Keep up the Great work 👍🤟

[@timmyhasheart]

Thanks so much mate!! For as long as I have something to share I’ll share it as it is 🤙🏻🤙🏻

[@Brennomac83]

After owning 7 patrols I now drive an NP300 for family safety, I still really enjoy watching you and Dan working on patrols haha

[@timmyhasheart]

That’s awesome mate haha, thank you 🙏🏻 I rate the NP’s!

[@user-lf4tj6rg9h]

Патроль это легенда🎉🎉🎉🎉❤у меня 60😊как машина выходного дня,,,езжу кайфую на нем

[@adammiles3095]

​@@timmyhasheartwat is the best radatior the full copper or plastic tanked in a gq cheers

[@benmcelligott2006]

this thing is still one of the best gq’s I’ve seen 🔥

[@timmyhasheart]

Haha cheers mate appreciate that 🙏🏻🙏🏻

[@Gu_Gus]

Mate if you made a block buster movie we would be happy to sit there and watch it and be keen for the sequel. Your content is a valuable resource.

[@timmyhasheart]

Hahaha coming to a cinema near you mate, cheers 🙏🏻🙏🏻

[@sevysnape]

Video was not too long because it was very entertaining all the way through, thanks again Timmy :)

[@timmyhasheart]

Thanks so much mate glad you enjoyed! 🙏🏻

[@lcos93tu]

Came across you through Tyler and Designed and Built page. Just loved the way you drove, explained things, your humour and how down to earth you are. Decided to check your own channel and mate I can’t stop watching. I drive a Prado 120. Don’t even own a Patrol but I can’t stop watching your videos. The way you work on your cars, quality of the videos, how organised you are in your shed and how you explain things so clearly. Again I don’t own a Patrol but I’m learning! Keep it up mate. Time to binge your videos mate!

[@timmyhasheart]

Wow dude that’s such awesome feedback thanks so much 🙏🏻🙏🏻 appreciate you watching and taking the time to leave a comment mate cheers 👊🏻👊🏻

[@chrismoore4406]

Love the big 32"s

[@timmyhasheart]

Hahaha 🙅‍♂️🤣

[@toms3127]

Love your videos mate. Great information. Thanks again.

[@timmyhasheart]

Thanks so much dude appreciate you 🙏🏻🙏🏻

[@leightonB69]

Great work Tim very helpful and informative 👍

[@timmyhasheart]

Thanks heaps mate, appreciate you always watching and leaving a comment 🤙🏻🤙🏻

[@martintierney28]

Cheers bro alot of good information appreciate it 🤙🏻

[@timmyhasheart]

No worries at all mate thanks for watching 🙏🏻🙏🏻

[@xvirus-_-viodx3717]

I watched this start to finish aye, love the way you present! keep it up!

[@timmyhasheart]

Thanks heaps mate I appreciate that 🤙🏻🤙🏻

[@jeyecomerford477]

great video mate, as always. keep up the good work

[@timmyhasheart]

Always mate! For as long as I have stuff to film I’ll bloody film it 👊🏻👊🏻

[@chrisdaniels4420]

Great vid as always. You got so much done in a short time. Love how well the new brakes stop those “big 32s” 👍

[@timmyhasheart]

Yeah was full on couple of weeks haha, driving so much better now though! 🔥🔥🔥

[@kylelang2755]

Another great vid Timmy , loving this content - straight to the point and full of knowledge

[@timmyhasheart]

Thanks so much mate, legend 🤙🏻🤙🏻

[@anbu999]

Thank you for informative video

[@timmyhasheart]

No worries, thanks for watching 👊🏻

[@James-ss3vw]

🔥 edit work

[@timmyhasheart]

Cheers mate 🙏🏻🙏🏻

[@bentaylor881]

Hey Timmy, even for Cruiser owner I love watching your channel. Keep it up and don't change the way you make them, its great. Well done on your 'sensible' approach to maintenance and noticing the little tell tail signs of an emerging issue then fixing without all the drama some other channels do. I'll definitely be watching your adventures.

[@timmyhasheart]

Thanks heaps mate appreciate that 🙏🏻🙏🏻 honestly when things turn into problems they just stay on my mind until I sort them 🤣

[@rtarrant1]

Another belter. Entertainment and mechanical information…. love ya work

[@timmyhasheart]

Cheers mate appreciate it 🔥🔥🔥

[@user-xt6jy2bt1m]

love your videos and i am still happy from seeing you last year

[@timmyhasheart]

Awesome mate thanks for watching 🤙🏻🤙🏻

[@damirr6]

Such a useful episode, learned some new things. Thanks Tim 👌🏽

[@timmyhasheart]

That’s awesome mate glad to hear 🙏🏻🙏🏻

[@ian4x4fleming8]

Cracking episode Timmy 🤙🏼

[@timmyhasheart]

Thanks mate 🔥🔥

[@Tb48life]

Awesome episode Timmy ya killing it 👍

[@timmyhasheart]

Cheers dude appreciate it thanks for watching 🔥🔥

[@beanbags3045]

Love the videos mate your my inspiration for my Ute

[@timmyhasheart]

Nice mate! Glad to hear it!!

[@RichardB-nc8ru]

Great skills, awesome video and really well put together(thanks for making it). It'll help me no end when I get to work on the old GU.

[@timmyhasheart]

That’s the hope mate!! Cheers for watching 👊🏻👊🏻

[@adengarner8621]

nice work mate luv it

[@timmyhasheart]

Thanks bro 🔥🔥

[@Jack_spry]

Great video mate. Been questioning my glow systems so good to able to know what to look into.

[@timmyhasheart]

Nice mate hopefully this helps!!!

[@triggerhappy8872]

Hey man, this was a grouse vid & really like how ya explain stuff. Keep’m comin mate 👍👍

[@timmyhasheart]

Thanks so much mate, hugely appreciated 👊🏻👊🏻

[@richardwalsh5570]

At least you have the good shed now to tick the jobs off in mate 👍 Super video and instruction 🎉

[@timmyhasheart]

That’s exactly right haha, shed rules, now just gotta sort the rust buckets in it 🤣🤣

[@lumox4x4wehelpyouexplore49]

Enjoy your content I hope you keep putting something up every Sunday

[@timmyhasheart]

Not a chance I’m going to every Sunday, fortnight is about the limit for a hobby when I work full time. 🤣 even that pushes It, thanks for the kind words mate

[@peterball4970]

Great to learn all the tips and tricks Tim, thanks for explaining the glow plug set up. Also good luck cleaning that rad took me hours of pain stacking prodding and washing to get that bloody Tasmanian mud out of my rad. 😁

[@timmyhasheart]

Hahaha yeah it’s cooked, she’s all sorted but 🤙🏻

[@Cicada4WD]

Great video 📹

[@timmyhasheart]

Thanks mate cheers for watching 👊🏻👊🏻

[@jessetink3753]

Wow a busy couple of days there Timmy Awesome as always mate 👍🏽😊

[@timmyhasheart]

3 weekends to be exact 🤣🤣🤣

[@jaydenhide9179]

Another great video Tim. Still my favourite channel on KZbin

[@timmyhasheart]

Thanks so much mate 🙏🏻🙏🏻

[@user-fj6mz7ju9e]

great video . enjoy watching you work on your patrols . i have a gq as well as gu. i an relate to the work you do on the patrols.

[@timmyhasheart]

Oh nice dude!! Best combo 🙏🏻 glad you can get something out of them 👊🏻

[@michael.klavers]

Another ripper vid Timmy 👌

[@timmyhasheart]

Thanks so much mate 🙏🏻🙏🏻

[@michael.klavers]

@@timmyhasheart I've got to say, you've come a long way since the old girl was a wagon. It is great to see

[@thejannayanatharu1397]

great video mate

[@timmyhasheart]

Thanks dude 🙏🏻🙏🏻

[@robkay9227]

Good work

[@timmyhasheart]

🙏🏻🙏🏻🙏🏻

[@marksmith3631]

Timmy, keep it up, love the maint ep's, the tips on what you've come across, etc. Love your work - keep it up

[@timmyhasheart]

Thanks heaps mate appreciate that 👊🏻👊🏻

[@koontproductions]

Ripper service vid mate smashed out the list.. That shed and hoist is mint. 👌

[@timmyhasheart]

Thanks heaps mate, yeah dude I’m very lucky haha

[@koontproductions]

@@timmyhasheart well deserved I say mate.

[@luked237]

Mate great vid 👍

[@timmyhasheart]

Thanks dude 🙏🏻🙏🏻

[@taeymansom]

Great to see you getting settled in the new workshop mate, gets me amped up to work on mine 🤙 Appreciate you not glazing over stuff too, more people need to follow the trend you’re setting and give the inexperienced something to be able to learn from. Keep up mint video’s mate 💯🤘

[@timmyhasheart]

Yeah I definitely am loving it dude!! And for sure you can understand why though KZbin is super brutal for people clicking away and so if you want to grow which I mean we all do.. you have to ride a fine line between enough info and still fast paced 🤙🏻

[@Crawer101]

Love it Timmy... and now I want a hoist!!! Keep doing your thing mate. Totally relatable and giving me the confidence to tackle the bigger jobs on my GQ. 😎👌

[@timmyhasheart]

Haha it’s pretty handy that’s for sure. Thanks mate appreciate the kind words 👊🏻👊🏻👊🏻

[@dylanhahn9938]

Hey mate really enjoyed this video

[@timmyhasheart]

Awesome dude thank you 🙏🏻

[@marks7120]

I love your videos. Great information and your confidence and information is awesome. I do believe your channel is unique in this way. You communicate in a great way. You talk to us in the same way you’d talk to a mate in the shed. I’ve also seen your collaborations with other KZbinrs, and they all respect your knowledge and 4wd knowledge and experience. You should be proud of your work.

[@timmyhasheart]

Thanks so much mate that’s a huge compliment, I appreciate it 🙏🏻🙏🏻

[@Reecerudd1]

Definitely learnt a couple new things 🤙🏼

[@timmyhasheart]

That’s awesome mate thanks for letting me know 🙏🏻🙏🏻

[@harro9447]

Just got to love maintenance 🤣 to be fair it's a great feeling nowing you have just done a bunch of work to your car especially when it drives better !!!

[@timmyhasheart]

Oh mate so good haha, drives like a dream now.. well.. as much as a GQ can drive like a dream 🤣

[@aspectscarpentry4310]

Yay a full video not a 2 or 3 parter on ya mate!

[@timmyhasheart]

Screw that haha 🤣

[@VaughanMunro-js4nr]

What a Great maintenance video. Something for everyone in this episode. The transmission jack is probably safer with two people than one. Thanks for the other handy tips in the video.

[@timmyhasheart]

Yeah certainly takes a bit of getting used to to get confident with it haha, wasn’t a fan to start with but then got the hang of it 🤣

[@Boxy92]

love the vids :)

[@timmyhasheart]

Thank you 🙏🏻

[@TroyBroadbent]

You rock bro

[@timmyhasheart]

Thanks heaps mate cheers for watching 🙏🏻🙏🏻

[@DesignedandBuilt]

Love to see it Timmy! The mud/dirt from the $1000 track. 🤣 Also, must be nice to have a second gear again.

[@timmyhasheart]

Hahaha oh mate bloody unreal to have a 5 speed again. 🤣

[@BenWaters-uz3km]

When your hand priming the fuel prime till its hard, crack the breather on the pump and go again till there's no air and then close the breather and prime till hard again, love the videos

[@timmyhasheart]

Or hit the key until the lift pump changes tone and crank the dog till it starts 🤣 and cheers mate thanks for watching 🙏🏻

[@jackholliday5236]

Thank you heaps for the glo plug talk, just solved allot of my problems haha fuck yeah Timmy 👌🤘🏻

[@timmyhasheart]

Haha awesome mate glad to hear it cheers 🤙🏻🤙🏻

[@jonosbeanflickn]

Another great video timmy but don't forgetting rod ends for wheel wobbles

[@timmyhasheart]

Yeah dude for sure, front is heim and rear is fairly new they’re solid 🙏🏻🙏🏻 when I said the last thing it can be is tyres I just meant I’d been through the rest 👊🏻👊🏻

[@stephenlatimer1428]

gotta luv a hoist mate.

[@timmyhasheart]

So good dude!!!

[@antz2556]

Legend...

[@timmyhasheart]

🫡🙏🏻

[@scotthunter1639]

Awesome content Timmy 👌 Informational and executed well mate!! Little tip with doing the fuel filter after year's of being a Diesel mechanic fill the fuel filter up with clean fresh Diesel before fitting back onto the housing.. Then you aren't pumping for age's to bleed it.. Just something I learnt mate.. I've seen those panhard bars do the same over the year's as well.. Vibration and corrugations rough terrain seems to loosen the adjusting locking nuts.. The way you did is correct mate just a little tip mate from year's of servicing heavy vehicle's 👌

[@timmyhasheart]

Thanks heaps mate appreciate it 🙏🏻🙏🏻 I didn’t actually have any diesel on me or I definitely would haha, however I usually just hit the key to get the lift going and crank until it starts 🤣🤣

[@scotthunter1639]

@timmyhasheart 😂😂 that definitely helps having a lift pump.. We used to straight 50 grade gearbox oil.. It's normally used in Roadranger truck transmission's in extreme condition's.. We found they shift a little smoother especially cold.. Mate that we converted his gearbox oil is still running it after 8yrs no issue's at all.. His used to be a bit hard to get into 2nd gear when cold now no problem's.. Just something we found mate.. You were spot on with the glow plug circuit as well mate.. Same as what you do putting the control box near heat to dry it out.. You can give it a spray with circuit board cleaner which will help with corrosion and the drying out time mate.. Awesome content 👌

[@timmyhasheart]

Thanks heaps mate for all the great info appreciate it 👊🏻👊🏻

[@ferv5470]

Man, your TLC make her perrrrrr like a kitten 🙌

[@timmyhasheart]

🐈🐈

[@confuzsays7196]

Thanks

[@timmyhasheart]

Anytime 😅

[@Blueythebear9]

As a gu owner and previous gq ute owner everything you did is just patrol maintanance. I keep saying i need to do diff gearbox oil's etc but dont do it this video is motivating me to just get it done!!!!

[@timmyhasheart]

Hahaha nice mate, I dunno if replacing a gearbox is maintenance. Actually now I think of it it’s the 3rd gearbox this car has had so maybe it is 🤣

[@Blueythebear9]

Your style of driving takes its toll on any vehicle!!! Patrols are tough but nothing is going to withstand that terrain without damages. I do plenty of 4x4ing over here in the south of wa but it's mainly beach/dune stuff over here so no need for huge lift tyres and lockers

[@ineptthefallen]

great video, still waiting for the random moment of an amity cover :P

[@timmyhasheart]

No deal 🙅‍♂️ 🤣🤣

[@chriscoyne4827]

What a great episode really enjoyed the whole lot to be honest im pretty dam glad i watched the whole lot. With bleeding the brakes if i have someone with me i always take the bleeding nipple out and use my finger then start pumping you be so surprised how much crap comes outta it.

[@timmyhasheart]

Oh true!? Yeah right I’ll have to have a suss next time 🤙🏻

[@einfelder8262]

While a steering damper is not the way to try and cure death wobbles, Patrols should still have one. I had death wobbles in my GU which were intermittent - turned out to be the Goodyear Wrangler MTR Kevlar tyres when they got to 5 years old. They had even wear but would sometimes distort while parked, even with 40psi. Replaced with Nittos which have never had the issue. I did love the MTRs, though, so much grip they kept spinning on steel wheels so put them on alloys.

[@timmyhasheart]

Yeah tyres a big cause of wobble for sure, but yeah don’t feel the need to run a damper in my GQ, I feel like it just hides issues, but would be nice for those big hits not to break my wrists but yeah, haven’t felt the need for one 🤷🏻‍♂️

[@Stuart_Field]

Tremendous mate well done. I always get something out of "service" vids. You mentioned with the brake bleed & which corner to start with ... to my mind lived-experience wins every time = if you know something works stick with it (& yeah tell us about it). Secondly I found the glow plug info very interesting particularly the temp sensor?? I'll have to re-watch & then go check mine. Cheers mate all the best

[@timmyhasheart]

Awesome mate absolutely I could be wrong I’m happy to learn but that’s makes the most sense to me haha 🙏🏻

[@shaunpidsley1275]

good stuff mate, do yourself a Favour and get a Gu brake booster and master cylinder to suit the front diff, you'll notice the difference.

[@timmyhasheart]

Bang on dude, one step ahead of you 🙏🏻

[@calepike]

"unichip 1HDFTE'" ahhhhh fark thats crack up! ;))

[@timmyhasheart]

Hahahaha I wondered if anyone would catch that, I was stirring my FTE mate up with it a few years ago 😅😅

[@tazyt3388]

All part of the not walking home game aye bro hehe

[@timmyhasheart]

Hahaha facts.

[@brandonpeall3912]

Great video Timmy 👍 I know your try to balance giving good information while keeping the videos interesting and not too long. While I know some people prefer a more entertaining video, for me personally I prefer when you explain the little ins-and-outs of what you're doing. So don't be afraid to explain things more if you want to.

[@timmyhasheart]

Thanks heaps mate yeah it’s tough on KZbin because like I want to do what I want to do while being as thorough as I can while not being too long while also trying to get people to stick around, especially now with a sponsor or two I’m banking on the videos going “well” to ensure they’re getting out of it what they deserve for the gear they provide etc. appreciate the feedback man 🙏🏻🙏🏻

[@brandonpeall3912]

@@timmyhasheart Trusting yourself seems to be working well so far, keep doing what you're doing man 👍

[@timmyhasheart]

@@brandonpeall3912appreciate you mate thank you 🙏🏻🙏🏻

[@richardwalsh5570]

Ha ha, last time we did the 1000. Left car in Waratah as couldnt drive over 60. Went home and got spare panhard. New one in drove home a treat 😅.

[@timmyhasheart]

Hahaha I know a few stories of the boys trying to get home from Waratah. Always a mission 🤣

[@PajEvo_Aus]

Works a full time job, has time to 4wd, film, edit and post sick videos. When do you sleep Timmy 😂

[@timmyhasheart]

Hahaha at work. 🤣🤣 na I honestly don’t do much else, work, edit sleep, work, edit, wheel 🤷🏻‍♂️ I don’t drink or have a partner or kids so I dunno, I manage somehow 🤣

[@matthamilton8268]

You will get use the hoist then you'll be able to do everything twice as fast, just time, good watch!

[@timmyhasheart]

Yeah it’ll come with time I bet haha cheers dude 🔥

[@lyonsy143]

A good little trick for priming fuel filters if ya primer pump is shot is pressurise the fuel tank with air in the filler neck, great on trucks as well when they have a couple of filters

[@timmyhasheart]

Oh yeah that’s a good idea, tbh it’s not that bad with a lift pump just leave it running for a few seconds and it primes up then just crank the rest through 👍🏻👍🏻

[@petejones961]

I took the shims out of my king pins and no more wobbles also check the bearings because they only move a short distance while turning and those few bearing rollers get worn or reposition the bearing.

[@timmyhasheart]

Yeah boi, the shims determine preload on the bearings and so you may start with shims when they’re new and then if you get play, removing them will tighten up the swivel hubs, and yeah you can check the races for wear marks in one spot, but that only generally happens if the rollers are not moving in the cage properly, realistically if both races and the cage are free it shouldn’t do it, but yeah mine were all aces cheers mate 🙏🏻🙏🏻

[@kwhite1229]

radius arm bushes can also contribute to the old wobble

[@timmyhasheart]

Absolutely it can, I should have mentioned when I said “only other thing it can be is tyre balance” is because I know what I’ve addressed lately, radius got new bushes before Easter last year 🤙🏻

[@gonewheelingoz3567]

Mine turned out to be the track rod behind the front diff. Or tie rod. Whatever they call it. One of the rod ends had play giving it a slight wobble at 60 an under breaking which made me think panard aswell.

[@timmyhasheart]

Yeah I reckon that’s contributing too, not the rear one though that’s solid, but the front heims have a little bit of play and I’ve had it before where it’s contributed 🤙🏻🤙🏻

[@simonburnby1997]

That winch had had a lot of upgrades 😂 mines lucky to get a service

[@timmyhasheart]

Hahahaha I just love trying different stuff man whether it’s warn, GP, Red.. I just enjoy having a go at everything

[@simonburnby1997]

@@timmyhasheartlove the 2 speed winch concept even if it’s just for winding in under no load

[@timmyhasheart]

@@simonburnby1997yeah definitely it’s such a good idea, so easy to slightly over gear or under gear a winch which I’ve found the hard way 🤣

[@robertmillar2037]

Fantastic episode and I don’t like patrols!! Respect your ability to do this yourself. Epic image of the vehicle on the hoist with glow of fireplace in distance. So does the fireplace heat whole shed well? Must get freezing in winter in tassie? Need another video like you did with your mate solo and had to cross a massive river before that awesome hut.

[@timmyhasheart]

Yeah dude that little fireplace actually does really well tbh!! And yeah every winter we go through there, nearly time to head through again!!

[@jmac822]

Great vid mate. That gearbox looked horrid when you spun her around for the camera. I felt that knock on the head mate, spin ya cap backwards. You'll save some skin on ya noggin.😎👍

[@timmyhasheart]

Hahaha even worse when you hit the tip of the button on the dog 🤣🤣

[@jmac822]

@timmyhasheart I did think the button was on top until the next shot and the cap didn't have one. Lucky hey😅

[@richardwalsh5570]

Between the cases probably where water getting into gear box. There bloody heavy those Patrol boxes. Easy than the shed floor mate.

[@timmyhasheart]

Yeah I reckon you’re right 🤙🏻🤙🏻 I have to pull the transfer again soon to replace the reduction gear shaft it ruined so I might actually drill its own breather into that centre section 🤙🏻🤙🏻

[@GU-24-WD]

Loose phanhard never thought to check mine I just brought new bushes and dampener. I’ll check that out now 😂😂

[@timmyhasheart]

Yeah any little bit of play can sort of amplify a wobble, I actually don’t run a damper at all tbh 😅

[@GU-24-WD]

@@timmyhasheart Thats very true something I’ll keep in mind I had a quick look mine seems all ok ill swap the phanhard bushes fingers crossed that fixes most of it🤣

[@NotAYoutuberAtAll]

Wooooo Timmy!!!!! Been waiting for another vid to come out and it's on the GQ!! lets gooo! Keep up ths great work champ 🫡

[@NotAYoutuberAtAll]

Just wonderring mate, what's your go to tracks around tassie up north which are relatively simple but are great to do?

[@timmyhasheart]

Every fortnight on Sunday mate!! 🙏🏻🙏🏻 Ahhh there is a LOT of good stuff around asbestos/sheepwash. 🤙🏻🤙🏻

[@NotAYoutuberAtAll]

@@timmyhasheart Haven't been up the asbestos ranges in a fat minute, you been down the east coast much near bicheno and all that too?

[@timmyhasheart]

@@NotAKZbinrAtAllyeah dude pretty much been everywhere over east, some good shit behind scamander

[@NotAYoutuberAtAll]

@@timmyhasheart Will have to check it out when I fix the pooey, cracked the head on the bloody thing the other day on the way home from work 🤣🤣🤣

[@mikemorgan4670]

Another stellar episode Tim. Hard to put into words how enjoyable your content is. Pardon my ignorance but is the e-brake on the driveshaft? Thanks again for all your content.

[@timmyhasheart]

Yeah dude on patrols the handbrake is on the back of the transfer 👍🏻 that’s why they work haha

[@stevebulach5198]

Hey Timmy, Great vid. Thanks for all of your Tips & Tricks. Not sure on the GQ's, but my GU has seals to separate the King pins from the Swivel Hub. Do replace them or just leave them out, which is like a Landy? Cheers from the Northern Rivers NSW 😃👍

[@timmyhasheart]

Yes from factory GQ and GU have a little disposable metal plate that separates the king pin bearing grease from the CV grease, I usually do run them however when I bought this GU diff it was freshly rebuilt and it didn’t have them and I haven’t yet needed to replace the king pin races

[@mrmoosepatrol]

Great content as always What do you coolent temps run at ? You didn't specify 😅

[@timmyhasheart]

70 around town 80-85 all day every day anywhere else 🤙🏻

[@jimmyd6819]

Very happy you went a bow 2 and not bow 2 plus, I don't understand why but I don't rate them as good as a few others motors. They should be because there quiet large.

[@timmyhasheart]

Yeah I’ve heard that quite a bit that’s why I went the 2, I think it’s the windings the 2 plus is a lot closer to an OX they’re built for 8HP as opposed to the bow2 which is only 6.8hp and more torque 👍🏻👍🏻 it’s to do with the windings being series vs. parallel wound. 🤙🏻

[@aussiewalkabout4x4]

be interested to see if the brake rotor slots retain mud and water and make a difference

[@timmyhasheart]

Yeah honestly I think it’s an old wives tale, never ever had a problem haha, slots, no slots, holes, no holes, dealers choice go ham and just use whatever 😅

[@dalemurfitt9839]

Absolute ripper episode as always. Best channel for anything GQ and TD! Question, that throw out bearing, you said it rattled at traffic lights, I've got a rattle in my TD and when I put my foot on the clutch pedal the rattle stops, release the pedal and it starts again. Had my clutch replaced a few months ago and the bloke said he replaced it all and is telling me it'll be the output shaft on the gearbox making the rattle. What's your thoughts? Thanks mate appreciate it🤙

[@timmyhasheart]

Yeah definitely the boxes do rattle around a bit, it’s a very very similar sound like.. before I replaced the box and the throw out this time it had a hell of a rattle and now, a week or so in the rattle is back but I can tell it’s probably just the box, which I think is what he’s talking about, but the throw out is way worse when they’re fkd out 🤙🏻🤙🏻

[@SeanSteggs]

Always a pleasure watching your Vlogs Sunday night. Off to Kingchrome for the tool launch. What happened to the Kingchrome toolkit giveaway winner announcement? Did I miss it? Jimny twin locked now 🤣

[@timmyhasheart]

Technically you didn’t miss it haha, I never “announced” it I forgot to film it, a couple of the people that won though did tag me in a Insta post that I shared, I’ll have to film something on it next video. But yeah selected 5 random people and had them sent out and they’re received etc. Appreciate the kind words mate 🙏🏻🙏🏻

[@SeanSteggs]

@@timmyhasheart congrats to the winners. Looking forward to your new new tool goodies. Don’t use Insta that much but hooked up with your feed.

[@jem9786]

Spot on man! Where did you get that race driver for you wheel besrings from if you dont mind me asking?

[@timmyhasheart]

Ahh it’s actually a kincrome one haha, I’ve wanted one for ages and asked tank very nicely when they were sorting me the other gear. 😅

[@jem9786]

@@timmyhasheart legend

[@the510wagon]

Another good vid Timmy. Did you have any trouble pulling the glo plugs out? Sometimes they can't be removed on high mileage heads without destroying the head...? Did you use a special pulling tool?

[@timmyhasheart]

Na never had a problem before, but this motor is also a brand new motor, I got it from Nissan, only just clicked over 40,000 👍🏻👍🏻

[@dylanrobinson5224]

Good video, old man told me when changing the fuel filter to fill it up before putting it back in the car. Wondering if you do the same?

[@timmyhasheart]

Yeah I would if I had diesel on hand, but yeah I didn’t have any diesel laying around, but like people think of priming diesel as some big nasty chore, it was only a couple mins on the primer and it’s good to go, if you have a lift pump it’s even quicker 🤙🏻🤙🏻

[@dylanrobinson5224]

Thanks Timmy loving your videos mate

[@scottdonna2690]

BIG 32's LOL 🤣🤣

[@timmyhasheart]

🤣🤣🤣

[@scottdonna2690]

32s the new 37s love the content 👌🏼

[@cartycarnage2108]

I’ve got death wobbles around 70 - 75km and I’ve replaced everything except, radius arm bashings could that be it?

[@timmyhasheart]

Yeah absolutely it can be, I didn’t mention them sorry because mine are new as of last January. But yeah any loose bush in the front can cause a wobble. Tyre balance is the biggest one though. Unless you have beadlocks then tyre weights mean nothing because rubber slips around the rim. 🤙🏻

[@mattluszczak8095]

Rtv mate between transfer and gbox and bellhousing to engine

[@timmyhasheart]

That’s what the book says!! And I’ll never do it 🤣🤣

[@mattluszczak8095]

@timmyhasheart why not it comes apart easily once the nuts are off . Inside.nice and clean...

[@timmyhasheart]

@mattluszczak8095 never had an issue I’d rather all the schmutz that gets in there from headlight deep bogholes be able to just as easily get out 😅 never failed me in the years of motors and gearboxes this things had 🫠 however I respect others’ approach also

[@bears2604]

Is that you timmy i have seen in launceston a few times over the last few minths, i drive a white gq and wave but you never notice me lol

[@timmyhasheart]

Probably yeah usually if I see a GQ and get a wave I’ll wave back haha must be concentrating on the road 🤣

[@whsstsuehehauajrn2914]

Hey mate just a quick question, what is the name of the brendix kit for the gqs or are they all universal?? cheers

[@timmyhasheart]

I couldn’t actually find the upgrade kit for a GQ unfortunately dude only for GUs, which is what I used because I have a GU diff 🤙🏻🤙🏻

[@whsstsuehehauajrn2914]

@@timmyhasheart thats why I couldn’t find anything ahaha, cheers legend

[@craigmooney2630]

Gu manual , much nicer gearbox Especially 1&2 synchro 1000 dollar track just cost a Lot more 🤑🤠

[@timmyhasheart]

Yeah unfortunately they don’t fit in a GQ, totally different shifter setup 🙅‍♂️ I actually didn’t know they were too different inside though, but this box was free so didn’t cost anything haha 🤙🏻

[@craigmooney2630]

@@timmyhasheart The house set up is looking mint , all the effort putting into KZbin is paying off 🤠

[@timmyhasheart]

@@craigmooney2630cheers mate!! 🙏🏻🙏🏻 unfortunately KZbin doesn’t pay quite enough for a shed like this but luckily I also work haha

[@dodgyass11]

the whole 4wd industry is held up with grunt straps 🤣

[@timmyhasheart]

I dunno what you mean, assuming you mean like the strops and ratchet straps? If so.. absolutely. 😅

[@blink55667]

Tim for fucks sake mate release another cover. You're killing me mate.

[@timmyhasheart]

Nnnnnnope 🫠