My GU patrol RIG RUNDOWN.. Suspension, tyres, + everything custom EXPLAINED..

1999 Gu series 1 patrol
Starting from the ground up.
Suspension setup.
7” superior shocks (13” travel)
-3” coils
-Xlink
-Black hawk front radius arms
-Superior drag link
-Superior track rod
-Superior rear long arms
-Superior upper arms
-Rampt customs upper arm mounts
-Superior panhard
-Home made bump stop extensions all round
-Raised rear shock mounts
Diffs
-H233 diffs, 4.6 ratio
-Twin locked with arb lockers
Transfer
-Running 85% reduction gears
Tyres
-Maxxis 40” trepadores
-17” steel beadlocks -44
Bullbar
-No brand, I made the sides out of 50nb
Sliders
-Home made out of 40nm
Rear bar
-Currently being made by rag customs, will be a tube style with swing away. With kickers to protect the bottom of the rear quarter.
Winch
-Runva 13xp
Uhf
-GME XRS 370 with stumpy Ariel
Driving lights
-Vicoffroad 9” lights
Snorkel
-Patrol docta, bonnet entry 4” snorkel with airbox
Rear “Toura” setup
-Custom home made drawers
-ARB dual compressor
-150ah lithium battery in battery box
-Switches at rear to run the lights and compressor
-Digital volt gauge
-3000w inverter
Interior
-3 pod pillar running, boost,EGT, water temp
-l.e.d lights
-Switches to run compressor, lockers and compressor
Engine
-TD42
-Built 12mm pump (non compensated)
-Front mount intercooler
-+75 injectors
-20G kinugawa turbo with 7” rear housing
-3” dump with straight through exhaust
Paint
-All new panels and then I had her sprayed in raptor
Future plans.
This could be endless haha.
But I’ll mention the upcoming mods,
4” l.e.d lights underneath for night wheeling.
The rear bar as mentioned
Roof sliders
New custom front bar
4link rear.
Cheers
www.my4x4.info/boofs-gu

[@shane151184]

sorry mate but mic needs to come closer to your mouth, when you brought it closer for that split second it worked well, but rest of it was too quiet. good to see you back in a "daily" rather than a comp truck though. keep em coming 👍👍

[@rollyb5061]

looks pretty awesome , looks great with 40s , the rear bar work will look great

[@boofsoutbackadventures4x4]

Thanks mate. :)

[@lukeprowse3180]

I’m in the same boat with the panhard my front and rear booth bind😂 I’m either going to lift it up on the diff end or lower it on the chassis end undecided yet I’m also making my own panhard bars with heims instead of the bushs cause I’m sick of replacing bushs every 2 trips

[@anthonyforgey3518]

Proper setup !!

[@boofsoutbackadventures4x4]

Thanks mate

[@brentmcd12]

Go the Patrol! your audio levels gain is a bit too low ! 💻

[@donaldwills2135]

Audio is still low but I'm trying to hear it 🤣

[@donaldwills2135]

It's silvertop by the looks

[@superhacker101]

man needs to learn to gain his audio to normal levels

[@Cicada4WD]

Beast 🚜

[@marcinmahny6963]

🛠️💪

[@420-g6x]

Nangkan tyres are good what r Yu talking abt?

[@superhacker101]

did you need a spacer for the steel beadlocks? i got like a 10mm gap on mine and really gotta tighten the shit out of the bolts

[@boofsoutbackadventures4x4]

Nah mate no spacer needed

[@jimmyd6819]

50 mm of up travel at ride height LEL

[@OrlandoBmz]

Mate where did you get those custom rims. ? 😂

[@boofsoutbackadventures4x4]

Haha boofscustoms.com

[@ChaseAustralia-vy5qj]

3inchlift