My Honest Review of Let’s Resin Silicone Putty with Super Delicate Shells @letsresin

Let’s Resin sent me a box of their silicone putty to try, so watch the video to see what I think! Follow the link below to buy!
******************************
***KS RESIN DISCOUNT!!!!***
KS Resin Liquidy Split - use my affiliate code for a 10% discount! Just click this link: www.ksresin.com/discount/Coas...
KSRESIN products are FDA Compliant (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.
**********************
***AMAZON AFFILIATE LINKS!!!!***
I am now an Amazon Affiliate, which means I will share my favorite items here for you, and earn a small commission if you use these links to buy them!
King Baas 4-cup turner: amzn.to/48t40Q9
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base: amzn.to/4aA1v0v
DAS air dry clay: amzn.to/3NSJd0x
20 PCS Starfish, 2.5" to 4": amzn.to/48kECwc
Hayes Paper Co. Waterslide Decal Paper Inkjet WHITE: amzn.to/3RVljUN
Hulless 4 x 4 Inch Self Adhesive Cork Squares, 120 PCS: amzn.to/3vjdQ8T
Seisso Mica Powders: amzn.to/3RBTZt8
I use turquoise blue (aqua), gold and pearl white
Eye Candy Mica Powders: amzn.to/486MvFr
Nokon Blue is my fav!
Let's Resin Silicone Putty and Resins:
amzn.to/3NNjkiI
LET'S RESIN Mica Chameleon Powder, 30g: amzn.to/48un5RU
Let's Resin casting resin: amzn.to/41xcyDo
Let's Resin UV starter kit with light: amzn.to/3RBCWHA
Let's Resin turtle mold: amzn.to/3tCR5wd
Octopus mold: amzn.to/47dg0UZ
GORGEOUS! Seahorse mold: amzn.to/47dfYMG
Pixiss alcohol inks: amzn.to/3NyGv0g
Blues are my jam! I also love their large 4 ounce bottles of silver and gold, which I use a lot.
Pinata alcohol inks: amzn.to/3vksFbe
My large 4-ounce bottles of aqua, sapphire blue and white are Pinata!
Tim Holtz alcohol inks: amzn.to/3TGFTcR
The Ranger browns are my favs.
SUNNYCLUE 100Pcs Turquoise and White starfish and turtle beads: amzn.to/3vdNHIL
**********************************************************
The “How did you make that?” videos.
making mermaid trash video:
• What is Mermaid Trash ...
Crushing glass video:
• How I Made Crushed Gla...
Sea Foam Video
• New Technique with Mod...
How I made my “jig”
• Watch This Video if yo...

[@aliasalien1806]

I find a bowl that a little bigger then the shape fill the bowl with the putty then press my piece in that way it gives you a flat bottom to use resin etc in.

[@ACoastalMagnolia]

Thanks! I made these for clay shapes, but will try resin too. I can always make another.

[@lauriewilson4741]

Now you have to show us how to use these molds! 😊

[@ACoastalMagnolia]

I will!

[@julienielsen3746]

I used to make polymer clay molds for smaller items. To use as molds with polymer clay.

[@adalavin8648]

The first time I used this it freaked me out when it stuck to everything but I found out like you I shouldn't have worried. I did find to use it as a resin mold it works better if you make it bigger than the object that you are molding. Like the star fish you molded go back and fill in the spaces in between the arms to act as a strength for the mold. I hope that makes sense.

[@ACoastalMagnolia]

Oh I needed to hear that! Glad I am not the only one who worried. I do plan on using this mainly for clay, it will also try with resin and see if this one works. I can always make another! ❤️

[@adalavin8648]

@@ACoastalMagnolia I’ll keep an eye out for your video when you use it for clay. I haven’t worked much with that so I’m curious to see how well it works with clay. It works really well with resin so I’m sure you will have good luck with clay also. 😊

[@Faith-qp8us]

i recently watched the guy who does all the resin experiments mix corn starch with the two parts of resin... I tried it..made my own putty and it worked.. if interested to see that I will try and dig it up for you...

[@ACoastalMagnolia]

Daniel Cooper! I love his stuff. ❤️

[@sarahrenfrow9795]

Wonder if you could use cornstarch on the mold when using clay?

[@gailbrown8710]

I would think if you wanted to do resin in them, you would need to roll out area and thick enough to do imprint because how you are doing it, it's not level and resin wouldn't work in it.

[@ACoastalMagnolia]

I am mostly making clay shapes, but can always make another for resin! Thanks for the tip!