My hot shooting Condor .25

My first video since completing the .25 upgrade. Sorry about the mistakes I made, I was a little nervous. I usually write everything down so that I don't forget like I did in this video.
Also, this is not the highest FPE I ever recorded, that would be 90 FPE in .25 and 77 FPE in .22.

[@TPVPRO]

I left the stock hammer in my .25 SS. With just the TT tophat wide open I get 971-968 FPS on 8 shots. I can turn it down to 2 and get 778-758 fps across 17 shots. Maybe try a stock hammer spring.

[@max333463]

Nice video. Nice Condor .25. Have you tried shooting a longer distance away from your chronograph?

[@jamesdenny4734]

You can buy heavier .25 pellets/ slugs... Mr hollow point has .25 slugs as heavy as 70 gr

[@whiff1962]

I literally get pellet on pellet at thirty-five yards, with the same pellets, even with the pellet leaving my LW barrel at over 1050!

[@22lr_plinking]

A little off topic, but how many dills do you get from the air Venturi? Thanks

[@silly800ify]

How did you put the supressor on if it has no threaded end?

[@Qdoggus]

Andres Lopez One of the best things about air rifles is they barely produce even a fraction of the muzzle pressure that rimfires, center fire etc produce. in this case the can was held on by friction and a couple of set screws.

[@silly800ify]

Were did you buy your supressor?

[@Qdoggus]

I made it using aluminum internals and pvc outer casing. No it would not thread on a firearm nor work to lessen report on one. It was made with little to no heat tolerance and just enough pressure tolerance for an air rifle.

[@matiasacosta429]

valve custom? hammer custom.? nice group...i need crhony my condor in 1050 fps for 31 grains so good. thanks

[@Qdoggus]

+Matias Ariel Acosta It had a TalonTunes Quick Change Tophat, and a heavier hammer weight, thats it really.

[@silly800ify]

Was it accurate out thr box?