My most extreme Nitro RC car bash event to date & Force .28 blows up!

In this video a lot of epic stuff happened but also a ton of stuff went badly wrong like for instance my LRP .32X coming loose at full throttle!
Follow me on Facebook: profile.php?...​
Follow me on Instagram: @nitromikerc
If you want to donate to the channel: www.paypal.com/paypalme/nitromikerc?locale=
Timestamps
0:00 Introduction
0:31 Warming up & Tuning our engines
1:58 Inferno ST wreaks havoc on the skatepark
2:58 DON'T TRY THIS AT HOME
3:24 HPI Trophy 4.6 running the LRP Enduro 46 pipe!
3:29 Kyosho Inferno ST is fixed
4:34 Spoilers are overrated
4:46 Engine mounting bolts are not
5:03 Force .28's last run
5:31 Some nice buggy jumps
6:22 Stupid dangerous stunt for more views :P
6:44 Fixing our cars
6:56 Speedruns with Kyosho Inferno ST
8:50 Kyosho Inferno ST crashes into ramp
9:02 Damage report
9:39 Checking out the internals of the Force .28
9:52 Conclusion & What's coming up
11:04 Another conclusion?
Car Specs:
Engine: Modified LRP .32X
Exhaust: Novarossi 9886 pipe with Novarossi 41032 header
Wheels: Proline 1178 badlands & DE-Racing Speedline truggy rims
Gearing: 15T clutchbell with 48T spurgear
Clutch setup: JVD 4 shoe clutch
Transmitter: Carson reflex wheel pro 3 LCD
T2M Starterbox
Servo's: Savox SC 1257TG & DS 25KG servo
#Kyosho #NitroRc #Lrp

[@SLC_nitro]

Definitely a proper bash session. Nice work.

[@NitroMike]

The reason I had to blurr so much in this video was because it got very crowded and KZbin doesn't want you to record kids or anyone else without permission. I don't want this video to be taken down so that's why I did the blurring

[@mdfishman1959]

That was insane!👍🏼

[@NitroMike]

Thanks man we have a lot more stuff like this coming up so stay tuned!

[@hybrid32494]

whats up bro! Epic jumps and as expected the common damage that comes along with jumping. Although I'm surprised your truggy only had minor damage from that ramp impact at 50 MPH!!!! ahaha. It literally looked like hitting a wall at 50 mph, I bet an ARRMA 8S would have survived that, JK!! since we already know my X-maxx jumped the moon and it's fine to this day, so I bet an arrma could too.

[@NitroMike]

I hit that metal fence at 80mph earlier and no damage!!! 😲😝🤣

[@hybrid32494]

@@NitroMike you almost hit the speed of light right there, any more and your truggy would have time travelled.

[@justinvandenberg823]

Tijd voor een force .32😜👉

[@PaddyPatrone]

Does the guy with the kraton have set the low voltage cutoff properly? Because cooking Lipos are often a result of discharging below 3.0 volts, or even lower.

[@NitroMike]

He had the lipo cutoff properly set but the kraton esc needs high amps and the lipo's he was running weren't rated to suply high amps

[@PaddyPatrone]

@@NitroMike If I read that correctly it`s a 30C 4500mAh? So it`s 30 x 4,5 = 135 Amps. Yeah that kraton probably has a 150A ESC, so that would be clearly the wrong ESC to Lipo combination. EDIT: it`s 50C. So 50 x 4,5 = 225 should work...

[@NitroMike]

@@PaddyPatrone He runs 100C lipo's now without problems

[@ady110fv]

That's given them some stick 😂

[@NitroMike]

This jump has actually managed to bend the chassis

[@daveplus4040]

The last moments... 😢

[@NitroMike]

It went like a warrior

[@FargothPL]

By the way, don't throw that bend driveshaft to a trashcan. You can try to straighten it with a vice and a hammer. It's hard to straighten it perfectly and sometimes breaks into 2 pieces, but if it survives, should still be useful.

[@NitroMike]

I have already straightend it before and it seems to drive ok with it. Also I just uploaded a new video already :P

[@FargothPL]

You have a nice team of people with passion, with nitro and electric buggy cars. I'm a little jealous :) If these people don't mind it, don't blur their faces but instead include them in your videos. Such material will be even more enjoyable to watch. As always, thanks for the great video! Can you tell me how did you mount your LRP engine to this Truggy? I got Kyosho ST, and the same engine, but I can't find enough big engine mounts (pull starter is too big for standard Kyosho mounts).

[@NitroMike]

You need to get a backplate for the lrp because it will run 10x better and otherwise it won't fit

[@FargothPL]

@@NitroMike Thank you for your answer. I tried to do that. I bought an engine backplate and mounted it in my Truggy. Unfortunately for me, this engine has so much compression that my starter box stops or burn the rubber of the flywheel (just one 550 motor T_T). What worse, we're having a weird time now. Nitro seems to me, to be slowly dying, which hurts me a lot... In my country, I wasn't able to find any starter boxes (let alone stronger ones). This is why I'm looking for how to mount it with the original pull starter - I want to use it with a little less power until I will able to buy a stronger starter box with one or two 750 motors.

[@NitroMike]

@@FargothPL I agree with you on that one Nitro life is currently a tough life but don't give up! A-main and eBay are you biggest friend! I got both 9886 pipes from ebay and my truggy 41032 header came from ebay back when everyone had them but my buggy 41032 came from a local guy. Concerning the starterbox you wanna make sure it lines up perfectly or it won't start also changing the height of the wheel itself can make a huge difference. But what always helps is preheating the engine to 200F!

[@FargothPL]

@@NitroMike I know, I always try to preheat my engines (I recently bought Engine Heater from SkyRC, before, I used a dryer or a burner). My starter box is set to my Kyosho Inferno MP7.5. The chassis plates are of different lengths, so I will have to buy a second starter box anyway. Thanks to the tests, I know that it has to be stronger than what I have. I order all parts for Kyosho from eBay. Unfortunately, they already cannot be bought in my country. What's worse, for a year now, even on eBay, the number of parts available has been declining at a terrifying pace, and prices are skyrocketing with every day :/

[@NitroMike]

@@FargothPL Unfortunately engine heaters 9/10 time don't even reach 200F I recommend you get a heatgun for break in and they are cheaper too and way more effective

[@Stiffsce]

The lrp is a little lean. Do you have the novarossi carburetor on their yet?

[@NitroMike]

Yeah but I had my HSN actually unbolt itself of the carb body so it started to run more lean as time went on

[@hybrid32494]

btw, here in the USA our current law on expectation of privacy boils down to this "In general, one cannot a reasonable for things put into a

[@Harvz78]

Are those HPI Savages still run?

[@NitroMike]

The HPI Savages are still in perfect running condition

[@timnijland1579]

When does the NitroBull .28 come in action?

[@NitroMike]

I need to stuff it in my savage in order to make it work but the problem is that the savage has it's own issues I need to fix and the pullstart of this engine sits too low so it won't fit in my truggy or buggy

[@Durban4052]

What about a backplate, Nitro Mike ?

[@NitroMike]

@@Durban4052 If you can find me one but I have a brand new pullstart on it right now

[@Durban4052]

@@NitroMike I will look in to it. 😉

[@Durban4052]

I sent you a pm on Instagram. 😉

[@atkracing]

If I did this I’d get yelled at by ten different people and cops

[@NitroMike]

You get yelled at for jumping a rc car?

[@atkracing]

@@NitroMike no I get in trouble fir drive them at nearby parks

[@PaddyPatrone]

All this blurring is kind of annoying

[@tjitsewenselaar5874]

PaddyPatrone that guy dont want on the internet

[@NitroMike]

I agree but unfortunately half the city was spectating and we have very strict privacy rules in the Netherlands and you can't have any underage kids in the video's anymore on KZbin in general

[@krodyssey4770]

Wait why did it blow up

[@NitroMike]

The engine bearings in his Force .28 blew up sending shards of metal directly into the cillinder.

[@krodyssey4770]

Why tho Ik it blew

[@krodyssey4770]

Is it because u running it rough

[@NitroMike]

@@krodyssey4770 No he blew his bearings because he didn't change them they were already on their way out but he refused to replace them. The engine wouldn't even idle anymore

[@NitroMike]

@@krodyssey4770 Also my car (the blue one) was not the one with engine failure. The red car was the one that blew up the engine

[@tjitsewenselaar5874]

Haha

[@marcowerner8739]

Those cars belong on the track bruder. :( Skate park bashing is for electric dudes. Those nitros cars come to life on the track.

[@NitroMike]

That LRP .32X will never go beyond quarter throttle on a track it has beaten 6S kratons

[@marcowerner8739]

@@NitroMike Gees, really that powerful? Yeah, then bash the S**** out of it and have fun man. But interesting to see this beast on the track. Just for fun.

[@NitroMike]

@@marcowerner8739 I actually have a race kit buggy that I will be running on a track in the future. That Inferno ST RTR isn't a track vehicle anyway

[@marcowerner8739]

@@NitroMike that's what they said about my Losi 8ight Truggy RTR. They were surprised how well that thing goes on the track.