My neighbor was surprised when I made this tool for my workshop!

[@ocsapy]

Oh my God ... Absolutely Awesome ... the most simplistic ideas are truly the BEST... WOW WELL DONE 👏

[@malcolmlindley4465]

This is about the only one of this type of ‘innovative idea’ videos that has any mileage. Might even try it!

[@lilianefrancomme2967]

Merci beaucoup pour cette vidéo. Excellent travail.

[@matthewstevens2700]

Simple. Efficient. Excellent.

[@neilparkinson8024]

Lot of critics commenting on what is basically a good idea. Nice short vid as well 👌

[@dogsy273]

I believe the criticism is attempted comedy.

[@Сергей-к1ь4л]

Все прекрасно понимают что наждак, по весу не маленький, а на таких шурупах надолго ли хватит этой конструкции. Наждак должен быть закреплён на металлическом столе и болтами. В России это стандарт такого крепления.

[@billbutler2452]

Very nice. Just moved, new house in town, less space than I had out in rural country, this will help me. A minor safety feature I've used in the past - Mounting my grinder / wire wheel on a pedestal (old restaurant table stand repurposed) on a wood board base, to prevent sparks / fire hazard, I covered the wood top & sides with light sheet metal. When I remount my grinder to the work bench to save space in my new & smaller work space I will again do the sheet metal trick. Probably never be an issue, but it's an easy fix, helps promote the safety attitude. Again, a great idea!

[@markduggan3451]

Nice space saving project.

[@dj3114]

Guess I'm just lucky I have the room, mine is on a small narrow table I made that is lower and to the side of the workbench.

[@Jumpmaster337]

I feel that your neighbour is easily surprised.

[@shvitalvitalsh9586]

Коротко, понятно и практично. Нет тягомотины. Полезная приспособа

[@the_original_skytiger]

Smart. What I really liked was the proper safety use of a table saw.

[@DickTate]

I was taught that the blade should protrude by the height of 1 tooth above the work piece. He wasn't using a safety hood on the saw either which was completely unthinkable in my time. Are you a professional, have things changed?

[@andrewvelonis5940]

Yes, I like those push tools.

[@masonmartin398]

Except when both push sticks were taken away in order to stop the saw, when the board was between the fence and the blade. Great video, idk abt the table saw safety

[@НинаЛобастова-т9г]

Молодец, золотые руки.

[@CreatorTips.007]

That's awesome! It's always impressive to see DIY projects come to life. Your neighbor must have been amazed at your creativity and skills-great job on the tool! 🛠👏

[@PropanePete]

What a great idea. That would work perfectly for my little workshop. Thanks for putting this up.

[@tonyhammer3588]

On PINE WOOD? Not for long. That cheap wood is going to crack and the Bench Grinder will crash to the ground. Typical THIRD WORLDER.

[@tonybarnes5309]

I like it. It's a nice idea of storing bench grinder out of the way and freeing up work bench space. Never mind the haters they probably have never worked a day in their life.

[@alanbotfield2308]

Very good idea, could be adapted for many tools and equipment, thanks for sharing

[@grantfahlman1815]

That is friggin' brilliant; I will definitely be doing that in my shop!

[@troymanning3150]

Awesome idea!

[@pukaseek]

If I was still young and doing woodworking I would definitely make this. What a great idea

[@kennethbrown8723]

That’s a great space saver! Nice and simple!

[@вячеслав-щ5к]

Пожалуй один на сотню полезный ролик, молодец, спасибо.

[@dongorrie1828]

I have also secured my bench vice with Tee-nuts so it can be easily removed when I need space.

[@gerrymcintosh4477]

Great idea. Thanks for sharing. 🇨🇦💝🙏🥰👍

[@Budnorth3637]

Really neat. That’s exactly what I need for my limited space workshop. I’m going downstairs to make one for myself right now.😊👍🏻🇨🇦 THANK YOU

[@philippeplastre2290]

Génial. Bravo

[@Dogsnark]

Why was your neighbor surprised?

[@loonranger469]

It was the neighbours grinder 🤣

[@loscrimefighter1899]

​@loonranger469 well played good sir!! 😅😂

[@ivanscountrymusicandcars2357]

He was surprised he was using a grinder made in China. His neighbor is a stickler on made in USA!

[@Paragraf100]

And was he also concerned?

[@Eff-U-Kay]

Because he said he didn't have a grinder when his neighbour wanted to borrow one

[@hawtenslaton4307]

Grate video and idea, oh Great CraftMaster! 💫💥💥🌠🌠🌠🌠🌠

[@heknows5418]

Your neighbor must have lived a very sheltered life

[@mariesheppard3750]

Love this idea, Thanks

[@ИгорьПрокович]

Если недостаточно места в мастерской, то идея отличная !!!! 👍👍....

[@barbersurgeon6145]

Excellent idea!!!!

[@CarlosJorge-v3i]

Muy bueno, qué sencillo

[@debralegge8513]

Great idea, good for lots of things. Thanks

[@jeanmoray6379]

Genius ! I give you a 10 on 10. Thanks for the idea.

[@jesusisgod6474]

Good informative short video

[@ВалерийБеликов-щ1н]

Bravo Mastery )))) 😊😊😊

[@christopheminguet12]

Fallait y penser. Bravo 👍👍👍

[@markedward2987]

Just attach the grinder to a board, attach a cleat underneath one end, place the cleat in a wood vice and Bob's your Uncle. Easy to use, and easy to store.

[@joseflaviomorais3041]

Muito bom valeu mesmo gostei

[@soujrnr]

That's really awesome. My grinder weighs a TON, so I'd really need to beef up the mounting, but it's a great space-saving idea!

[@michaeltreadwell777]

That is BRILLIANT !

[@Rod-y3m]

Finally a hack that is actually useful

[@arnoldreiter435]

i have been looking for a way to get more bench space......heading out to my garage and looking for the scrap wood to start this project.......thanks!!!

[@larrythiry157]

Great idea.👍

[@hughbegg274]

That’s awesome!!!

[@dougseivwright]

Looks good! Might be an idea to have a locking mechanism when in the upright position for safety reasons when grinding.

[@fabientuizat1129]

Bonne idée !!! Merci !!

[@JamesStover-gr3hw]

Absolutely a great idea sir

[@dlighted8861]

Alright you got me that was pretty good. I have a small workbench so space is at a premium. You need better screws holding the hinges on. An easy fix. 🤗😉🤗

[@ΚώσταςΠετρούδης]

Ωραίος ο μάστορας! Εξαιρετική ιδέα!

[@masterofcrafts]

🤝

[@qtran999]

Great idea!

[@MilanMatekalo]

Bravo majstore...😊

[@ieuandavies4134]

Excellent idea!👍

[@НиколайСкоромный-я4э]

В следующем ролике покажите, как все же покрасили эту великолепную конструкцию.😉

[@marygarrett9724]

That is neat !

[@ivansanchez5222]

Excelente idea gracias por compartir tus conocimientos

[@masterofcrafts]

🙌

[@mayaribehermoso5097]

Wonderful thanks

[@samuledarconi2927]

Slick and creative...goin to do this on my bench....thumbs up to the high speed video...

[@Vasily-v4q]

Отличная идея.

[@higherfordkid1625]

Good idea, neat job and neat video.

[@markbrown9838]

Great idea.

[@fritzgensheimer3377]

Super Idee, aber die Werkstatt ist nicht unbedingt aufgeräumt....

[@Petercrossed]

I'm gonna do this for my Mider Saw...

[@cesarsalvestro2766]

PARABÉNS ! IDEIA EXCELENTE !!!

[@masterofcrafts]

🤝

[@olegpankrashkin5081]

👍👏👌🤜🤛✊💪🤝. Круто и супер. Удачи. Благодарю.

[@chinomartinez2125]

Genial idea para pequeños lugares de trabajo

[@masterofcrafts]

🤝

[@davidk6271]

Good work

[@timkaldahl]

Idea appropriated.

[@Joschberd]

Genial!!!!!👏👍

[@jvillebil13]

Wow I just moved into my new house and have been organizing my workshop. I was sitting yesterday trying to figure out what to do with my grinder. Problem solved. Thanks.

[@yerigelmisken]

Good idea, cong.

[@keithgillogly7675]

Very brilliant idea!

[@carlmclelland7624]

Good idea. The only thing I'd do differently is use screws heavier than sheetrock screws to hold the hinges.

[@Sobhan385]

Perfect 👌 👍

[@russreed1529]

Actually, pretty cool. Good job.

[@chesteruk]

Genius, thanks for sharing. I keep my bench grinder under my bench and get it out to use and have to bolt it down every time. Will definitely make one of these.

[@HHH-yy3cy]

So easy... All can I do in our kitchen...

[@ian4iPad2]

I store boxes of stuff under my bench so this idea, though clever, will just get in the way when getting stuff out. So I fixed mine similarly to an offcut of timber, drilled holes through each corner and through the workbench, glued dowels in the offcut holes, and added rubber washers for a bit of anti-vibration. Now if I don’t need the grinder but need extra worktop space, I simply lift it out and temporarily put it out of the way. Cheap as chips!

[@joequillun7790]

Clever. I like it. Just wish my bench didn't have draws below it. Have a couple grinders taking up space right now.

[@antoniogutierrezbarba6360]

Presente: Cordial Saludo desde Jalisco Mx. Siempre pendiente.

[@masterofcrafts]

🙌

[@nore8141]

Loved your invention, will be using this on a few of my tools in the workshop ❤❤❤

[@bradleymiller7960]

Nice!

[@u5JAT]

Good Day Fabulosus Tks so much JATeixeira SC Brasil

[@giuseppegiannasso1494]

Decisamente ingegnioso !!!

[@kevinharms5158]

Good idea

[@GratefulThird]

Fabulous!

[@francisco-kb7mv]

That is very cool.

[@ВячеславЗамураев]

ОТЛИЧНАЯ РАБОТА и идея!

[@objection_your_honor]

Great idea. The plank should park vertical. Move the grinder sit further from the edge of the table when in use. As is, the corners of the plank will catch your knees or something.

[@sedition4267]

Too damn cool.

[@apar1560]

AWESOME

[@NCTYRANTHUNTER1]

✌️💯👍

[@masterofcrafts]

🤝

[@Gus0046]

Bien hecho buena idea para talleres con poco espacio. Te felicito 👏👏

[@lightningmacqueen4097]

Pretty cool idea but was your neighbor really surprised??? Come on, dude.

[@r123brown]

Clever

[@Petercrossed]

I told my wife I'm gonna make that. She said I don't have a grinder. I said ya but now I have to get one ......

[@masterofcrafts]

😁👍

[@ashwatt2885]

Very good idea, well thought out

[@petercowell2051]

Nice idea, thank you.

[@patrickflanagan8008]

What a good idea....nice one matey.

[@jerryyoung807]

Good one

[@Excitedtobehere]

Neat, mate