MY NEW FAVOURITE THING!

Hope you enjoy, any questions hit me down in the comments below, thanks for watching! G'Luck
Please like and subscribe for more. Videos every Tuesday, Thursday and Sunday.
IAN'S COMMEMORATIVE TRACTOR RUN - 15TH SEPTEMBER 2024
All money raised going to the Irish Cancer Society and Longford Hospice Homecare. Buy your entry for the tractor run or make a donation at stewartfamilyfarmlongford.com/ianstractorrun
FARMER PHIL Merchandise:
www.stewartfam...
Stewart Family Farm - Home produced beef & pork
www.stewartfam...
Telephone: [phone]
Email: [e-mail]
EirCode - N39 C6V6
Stewart Agri Facebook Page for any work enquiries - / stewartagri
Also, head over to my amazon storefront to check out products that I use and would highly recommend: www.amazon.co....
For those that ask how they can help out the farm and support us: paypal.me/FARM...
Lickd - Licenced KZbin Music : lickd.co/r/far...
Business enquiries: [e-mail]
FACEBOOK: FARMER PHIL
INSTAGRAM: farmer_phil_135
TikTok: farmerphil135

[@joinertanner]

With the amount of "spare "vintage tractors in the yard the could put a silage pusher on the back of one of them it would be there even if the loaders are busy at other work.

[@GeorgieRoss]

Swap the old tele for a skid steer, fabulous kit and be perfect combo with new tele.

[@colinwientjens1871]

Definitely go with the wheels for pushing. Yes single wheel will do the small feed bit.

[@helenstewart2085]

Am married to a extremely untidy farmer, other farmers ask what is my job, besides paper work, farm keeper is my description pick and put away stuff not put away by him. Also pest and weed manager!!!

[@mikeysky8917]

Keep the pins greased weekly with black pin & bushing grease and also keep the steering joints greased regularly also. We didn’t keep one of ours greased enough & it now has to get a full rebush and new steering arms. Costing a fortune. We have a 531-70 & a 536-60 and both great machines but that extra 1m is precious.

[@patodwyer721]

Nice one Phil You're like a kid that got a new toy for Christmas, you can't be got away from it

[@andrewwebb2691]

Always takes time with new machines you sit in a diff posì to what you used to

[@RoryFord08]

Just thought I’d let you know the cup holder is back behind the seat 👍👌

[@johndunne379]

Try extend out the boom to push in the silage in the shead Phil, it will give you more scope to swing

[@OOpSjm]

I was wondering why he didn't just extend the boom. 🤷🏾🤷🏾

[@Eirehunter22]

Can be very hard on the bushings on the main arm pushing to the side when fully extended,we have replaced a good few all were caused by this exact reason.

[@2013viewchannel]

Best of luck with the new loader looks the business. As for options for pushing up, you could get a pushing wheel with a hydraulic swing over and stick it on the MF135 (it would give you a reason to get it back running again). And use this to just push in the silage. I assume you will also have to do this in the new farm too so if that tractor can go between the farms that could be fine. Alternatively you could get one that could be pick up by the small tele so that could be used to push in to the timber shed and along the feed passages. That’s assuming you keep the small tele in the yard.

[@brendanquinn3295]

Tidy machine Philip. Best of luck with her. We've a 7m Manitou. Similar size machine to your new JCB. We use a wedge, but its angle is not steep or aggressive enough. If you buy a wedge make sure it has a very steep ange or it will just push material in front of you. Try your boom out about 2m with the forks on. It sweeps silage in like a big brush.

[@wulliewhyte544]

Make a single wheel for that small shed Phil squeaky seat is common in those loaders after you get used to it you will never want the loader tractor any more .

[@leomcnally4999]

Could u not just push in the silage with the head stock without the bucket for now untill you get sorted??❤❤❤

[@ThingyGoos]

Yeah just tip it flat and boom fully outit works fine as long as you have room to swing outside the shed​@@leomcnally4999

[@stevenneville351]

Watch Tom pendant Pendleton for the wheels he uses them on his teleporter

[@stevenneville351]

Watch Tom pendant Pendleton for the wheels he uses them on his teleporter

[@KevinJohnston-h9c]

The tyres are better for pushing sliage because it would be able to get to the back of the shed

[@lesterhertel2945]

Another very interesting video Thank you 😊😊😊😊

[@VBYT7740]

Wd40 and a tin off spray grease or sprag chain grease and work it into the track off the seat thatll cure your squeaky seat for a while. Fitted brand new seats to jcbs before and no difference still squeak

[@claetuswoodroofe1854]

Philip the left hand mirror is very prone to damage as it stands out from the cab the solution to that is replace it with a smaller one the same as what comes on a Massey inside the back window fits perfectly and with its curve you should see enough

[@padraigking5185]

Good stuff

[@johnearle6667]

A sled is best ! I have had both and the sled is definitely the best , we have a Tanko beat chopper on the front of the jcb and just chop into the diet feeder and watch the clock for the correct weight ! I think you are just wearing the belly out in your feeder chopping beat in it .

[@FARMERPHIL3690]

Good idea that with the beet chopper bucjet will have to look into it

[@joneyjeep]

You’ve a yellow triangle on the dash press the I button till you get the first aid box and hold you’ll see the code there nothing serious when it’s yellow!..

[@FARMERPHIL3690]

It’s low on diesel is all

[@joneyjeep]

@@FARMERPHIL3690 Only a miner thing🤣 There a good machine in fairness I’m a heavy equipment mechanic in Wexford I do a good bit of work on them from time to time keep her greased especially the kingpins and watch out for wet straw or whatever lodging under the arm to prevent damp getting into the plugs on the wiring loom other than that keep her serviced and you’ll have her years to come! Best of luck with her👍

[@OOpSjm]

@@FARMERPHIL3690 😂😂

[@ianhaggart1438]

Fair upgrade there folks... looks the business 👌... just mind thought those sheds and doorways are going to be a lot smaller now that what you were used to.. 😀.. stay safe 🏴󠁧󠁢󠁳󠁣󠁴󠁿..

[@homey3051]

Do they have skid steers over there and can you demo one

[@retrorevolution6534]

A good tip which I forgot about: When you're going round tight corners, as long as you have enough height clearance, if you lift your boom up and crowd your bucket down as far as it will go, it'll make your machine a fair bit shorter and more manouverable and will also give you loads more visibility so you can see where the wheels are on your right hand side

[@retrorevolution6534]

I knew you would love that machine Phil, you's should buy some Q fit brackets and you could weld them on to whatever implement you want, the place I used to work at used to get them and weld them on to all sorts, possibibilities are endless. A smaller bucket with straight sides would be a good start, that one's not ideal for them tight spots, it's surprising how much difference a bucket can make to one of those machines, it took me a while to figure it out tbh. There was one bucket in particular that was modified, smallish bucket with straight sides (triangular) but brackets moved down, a bit like your bucket, with a nice new blade welded on that two or three of us used to almost fight over because it was just so much better and just made the job so much easier

[@Johnnycambell]

What ye want is a skid steer for cleaning out them awkward sheds they are unreal

[@kieranguy6110]

Bale spike in to round bale straw push in good job

[@thomas_4426]

Are yous gonna put normal tyres on the tele or just leave the road tyres on her ?

[@iqbalsidhu6651]

Well come ji

[@michaelkeogh9238]

Why ye not sowing winter corn

[@twinchop4581]

What would she be like On the silage pit? Would she push up With 6 trailer s drawing?

[@johnlydon533]

Great video Phil. Enjoyed watching 👍🏼👍🏼

[@farmerslife2612]

Hi farmer Phil that was a great job with your JCB and that's great looking sliage to keep up the good work lad 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

[@michaelstaunton1632]

Good luck with the new machine on the farm a very useful piece of kit surely 👍👍👍

[@irvenrathburn9421]

Looks like the JCB is doing a good job. Time for a little rest after a busy summer.

[@tobymoore2308]

There is an old video on KZbin I believe it’s called winter of discontent, there is a good idea for a push wheel on it 👍

[@ianwilson833]

Good luck with the new yoke, Should be a cup holder behind your left shoulder, holds a beer can anyway 😂

[@kevdel]

Cup holder is behind you on the right side

[@davidsata1]

Nice machine best of luck with it. Probably a bit big for what your doing in the yard with it.

[@JamieHickey-c3f]

Wouldn’t be a jcb without the sqeeky seat

[@winstonfoster6009]

Douglas claas dealer sells a great silage wheel

[@sampowell6240]

how's the new grain shed going ?

[@iamblunty]

haven't You got any security lighting round those sheds at night.

[@colmanlong1032]

Your on the Ball about packaging,then àgain look what the bikeshedd cost.

[@robertdonnelly385]

Would a 320 or similar not of suited better phil?

[@cdemo1186]

Just wondering if you would ever consider a zero grazing wagon when you put the cattle in first,it would save on the pit. Just curious if you ever considered it. 🤔 Well ware again on the new teleporter 🍀

[@FARMERPHIL3690]

Not really as we’d only be taking grass ahead of batches of calves to zero graze into the bulls

[@cdemo1186]

@@FARMERPHIL3690 I forgot about the calves 🤦🏻‍♂️ What's your thoughts on the zero grazing platform?

[@Georget5105]

Use a wheel to push up

[@DonalHarte]

Phil are ye planning any winter cereals this year

[@onthewing2101]

Is this JCB better than the Paus you had on demo?

[@darrengolledge1386]

Hi Phil Nice finally to be able to see out of clean windows. How long do you think it'll last 🤣 Cheers Kermit

[@Kermit306TCI]

Not for long, if im looking to the other tractors

[@andypreston6899]

Such a JCB fanboy, next you'll be getting a FasTrack!

[@OOpSjm]

Gotta keep the inlaws happy.

[@Tigman401]

Evening!

[@RobbieOhanlon]

The camera outside while you're talking inside the machine is some job.

[@adrianshjadesheehan9991]

Great stuff phil

[@darrenlord5439]

Dose feeder cut up the beet

[@thomasmaher6642]

The wheel is the best

[@richardparkinson8651]

Now we know you prefer jcb to massey, never seen you in massey overalls 😂😂

[@gerrymulligan2602]

Ya never said what trading in against that yoke

[@padraigcodd71]

Make a wheel for pushing in

[@ronaldlucas5360]

Nice video

[@OOpSjm]

Get a camera for the hitch

[@gerrymulligan2602]

Why not get same size as one have

[@damienely7614]

☝️

[@pauljamesfitzmaurice3192]

Could you not just use a fork and just fork de silage into the cattle

[@user-zu6qn9ux9n]

Fine for a few cattle, but with the amount of pushing up these guys have do you’d be all day with a fork.

[@pauljamesfitzmaurice3192]

@@user-zu6qn9ux9n I could have about 100 animal's in between cows and calves and finish cattle and I fork de silage into them every day

[@muraddairy3271]

Sir, I am from Bangladesh,,I want you work in your dairy farm

[@andneekey]

need to start wearing a red shirt and pointy ears if you using a teleporter :)

[@greggroome2791]

👍👍🙏🙏💪💪🇮🇪🇮🇪

[@Happyfarmer595]

1st