My solution to the no longer available Astro Nano Wrench

Astro stopped making the wrench that went along with their Nano Sockets. I have a solution for that.
I receive no compensation for the links. Just for info. Shop for the best price.
JTC low profile adapter set #7967 - www.jtcautotoo...
O'Reilly 3/8in Adapter #UC1202TA - www.oreillyaut...
If you have the 1/2in drive nano socket set:
O'Reilly 1/2in Adapter #UC1203TA - www.oreillyaut...

[@Jeff-rk8hq]

For anyone interested in the nano, sockets and different ways to implement them tekton made a xlong dubl box ratcheting 6pt wrench And if you use that with a plastic socket rail clip like the nanos come on just Put it through the backside of the ratcheting wrench and it’ll hold 10 low profile socket in place and your golden….now that is for the 3/8” drive nano sockets only as it is a 17 and 19 mm. I don’t know of any with 17 and 22.

[@Mr2004MCSS]

Nice video and workaround. I have that Astro wrench for the Nano sockets as well as the long ratchet for the same sockets. I didn't know that they had quit selling the wrench. That is too bad.

[@CorvetteTrev]

That's pretty cool, i just took a square socket rail , and put a screw through a washer into the 3/8 socket rail. (*edit- no bulk)

[@hemi08911]

Gearwrench makes a set of magnetized shallow adapters that will work perfectly in this application.

[@Jeff-rk8hq]

That ratchet appears to be nearly identical if not out of the same factory as the duratech branded ones made by great star tools, (the ones that bought SK pony Jorgensen, shop vac, work pro etc but I believe the “new” Astro nano ratchet is also sold under the brand Duratech and it is straight garbage. Supposed to be a 144position The flex head is floppy as all get out no directional lever, The sockets fall out and the ratchet Sounds like you’re crunching a bag of bones.

[@Liazon098]

That is a very creative solution too The problem of that wrench! I actually wish I worked on cars more to use wrenches like you're using. I personally use them on impacts for quick jobs. I would say I'm using them improperly, only because I'm not really leaving the wrench capability. It's easier breaker bar, torque, or a gun. Hardly a wrench... Still with what I know now I'm going to probably have more life out of them. Thank you.

[@oldguyramblings]

You are welcome. Glad you found it helpful. Yea, I am not going to use the wrenches for breaking anything with a high torque, either. But the do come in handy for some of those small fasteners, in tight places.

[@jrpowers667]

I got their new long 19 mm wrench and it's too long for general use. So searched and found an Alltrade double box end ratcheting Wrench 17mm and 22mm. It's a tad slimmer than the modern ratchet wrenches. I used a similiar adapter to your I had in my tool stash and it works great. For those super tight areas. You can also weld a socket holder from a socket rail onto a washer. It takes up less space that the adapters you demonstrated.

[@oldguyramblings]

Nice. I looked for a 17X22 combo and could not find one. Glad you did. Good idea, on the welding the washer on.

[@YepStillGood]

They still just have the long 17mm ratchet for the 3/8" and no 22mm offering to drive the 1/2" People have been making their own retainer similar to yours but thinner using a plastic square drive from a socket rail, a screw & a washer.

[@oldguyramblings]

Hey, what ever works for people. There are a lot of different solutions. Yea, I think it was a mistake to dump the wrench ratchet. Considering the number of views this video got, I am not much of a influencer, I think they may a mistake. I don't think people want to buy 2 or 3 tools, when you could have bought just one.

[@DD-gd3fr]

Great tip thanks. I was going crazy searching for that wrench

[@oldguyramblings]

Yep. A lot of places that used to sell it, just change to "out of stock", instead of "no longer available". Makes it hard to determine if the tool is still made.

[@Ninoo187]

​@@oldguyramblingsgood to know, I have the longer version but would love the shorter version

[@MrCrackers25888]

you can swap the head off the new wrench and repair your old version, but you have to buy the new one unfortunately to do so

[@jaxbrewery]

Unfortunate that they discontinued them. No wonder I couldn’t find them.

[@oldguyramblings]

They stopped making the Wrench altogether.

[@joruckus]

Good solution, but now I need a solution for the 1/4 astro sockets

[@Slicerwizard]

But with those adapters, you lose the low profile, and isn't that the whole point of the tool?

[@dtacherra6063]

Yes. I bought Gearwrench's version of this one Amazon. It's the same height as using a 3/8 drove ratchet and low profile socket. Returned them. Wish the anvil didn't stick out the opposite side.

[@oldguyramblings]

You only lose about 1/4 inch with the adapter.

[@craigchiddo2794]

There are plenty of wrenches offering a retaining ring to hold the fastener get one of them tone is one brand

[@wim0104]

well, I can't find or see any online. Is there any model numbers?

[@b4zz3d59]

Great idea. Thanks 👍

[@oldguyramblings]

You are welcome

[@enragedplantera5585]

I like having two sizes on one tool for some jobs

[@oldguyramblings]

I agree

[@thetype85]

Hey! Those aren't SFI rated gloves you are wearing on the track!!!

[@oldguyramblings]

You are correct. Good eye. Just a HDPE track day. No roll cage, no nomex, no HANS and an open face helmet, etc. The gloves give a better grip on a leather steering wheel.

[@platoscavealum902]

👍