Per request I show what I keep in my daily use tool bag. #hvac #veto #klein #fieldpiece #tech-mct #loadout
Пікірлер: 42
@BobanMisevic6 ай бұрын
I will never stop being amazed by people needing 5 tools that do the same job. Never mind that they have it, they actually carry it around.
@johnwhaley5702 жыл бұрын
I also keep a magnet pick up tool and a inspection mirror in my bag. Good video, keep them coming.
@scottk06232 жыл бұрын
Curt, that’s the same bag I use. The little brush will fit in the outside metal tape holder. The handle fits it nice. Thanks for the share.
@Paulie12322 жыл бұрын
you forgot your gun, just in case you need to cap someone...
@Balticblue93 Жыл бұрын
He better have that on his hip IWB like the rest of us do. It needs to be on you 24/7, not in your bag. And Yes, I am being serious. I own an HVAC business and also an FFL. My employees are all allowed to carry as long as they are legal to do so and keep it concealed.
@PhilipNation-xm5lh Жыл бұрын
I just bought the Fieldpiece meter as well as the Joblink set to measure pressure/temp. Also bought the Veto Pro Blackout. I finally hit the wall and got tired of carrying gauge sets and crappy tool bags. Gotta work smarter, not harder. I love the meter despite its size. I'd been using a Fluke and really like the magnetic base on the Fieldpiece. Next to go will be the Fluke 52 thermometer. They are so flimsy. Drop em and the pins just separate from the board. I've been through 3 of them! Too expensive to keep replacing. Nice bag setup Curtis!
@luckybeltz38922 жыл бұрын
Love the keeping it light wished someone would have told me that 35 years ago
@OnePointLander2 жыл бұрын
If that Klein crimper could do insulated spades as well, that would be perfect.
@vitk4002 жыл бұрын
Удачной охоты, мистер говорящие руки!
@jefferysmith52802 жыл бұрын
Get a klien. 7 in 1 bit driver love it
@Sctronic2092 жыл бұрын
Don’t forget the right angle nut driver tool for the those pesky York and others furnaces.
@donaldpainter9562 жыл бұрын
Nice set up my diagnostics bag also weighs less than 10 pounds I've always used a rachet and Alan head sockets because over the years I've bought several service wrenches and they always get gone and you can tell alot about man by his shoes his hands and his toolbox
@techfive72022 жыл бұрын
I didn't realize the bag was double sided. Cool!
@ReliableHVACR2 жыл бұрын
Sweet 🤙🏽 that's the way, keep the load light when you can
@donaldpainter9562 жыл бұрын
I still use Kline crimper that's all it does is crimp but it gets in tight places because it crimps at the end not from in between the handles I bought it 20 years ago I haven't found one as convenient as it
@Eddy632 жыл бұрын
Nice load out 👍👍👍
@jericosha28422 жыл бұрын
I really need to go lighter. I have the biggest Veto and it's at least 60lbs or so. When dragging it up into attics it's pointless to bring everything.
@c21meister2 жыл бұрын
Oh no not the phosgene 🤣🤣
@anthonyc8262 жыл бұрын
Broooo nice man!!!
@justinfrias90302 жыл бұрын
Big gang
@YukonHawk12 жыл бұрын
Nice👍
@asg582 жыл бұрын
What meters u looking at to replace ur sc680? I have one as well and hate just how massive it is
@HVACGUY2 жыл бұрын
I ordered the Redfish months ago
@JamesBrown-db9pk2 жыл бұрын
nice set 2 heavy 4 me
@mattbilodeau24332 жыл бұрын
I want the Camo version of that bag
@domrod15792 жыл бұрын
I had one and lost it when I sat it down somewhere
@edwardgarza51042 жыл бұрын
We're would you keep your wirenuts and spade connectors. Sucks being in a attic and just needing a spade connector. Wish thoes small veto bags had a bigger outer pocket to keep a small container for those wire nuts and spade connectors. Thanks for the video
@kevinhudson36452 жыл бұрын
You can use a medicine container buy them at any walmart or pharmacy the kind that are for weekly meds.Like 2 bucks they work good been doing it for a long time
@jpcallan972252 жыл бұрын
At about 5:34 you have a couple of Power Drive reversable sockets 5/16 and 1/4 with a blue and yellow stripe, and red and yellow stripe. Who makes these and where can I get one? Answered it myself after a little more hunting - Malco.
@HVACGUY2 жыл бұрын
I get those at my suppliers. United Refrigeration or Baker Distributing. But, DeWalt also makes one - a little longer - you can get at Home Depot
@E.IS.M.I.A.2 жыл бұрын
@@HVACGUY lowes has the exact same version of those multi nut driver bits as the ones in the Home Depot but they are shorter, they are black instead of grey, and they are like 10-12$
@stephwaylonwells32182 жыл бұрын
👍
@realestateservicessaleshea992 жыл бұрын
🏈🍺😎🏈👍🏻
@toolfanatic2 жыл бұрын
👍🏼
@mattbilodeau24332 жыл бұрын
Whats the name of that cloth you use for flame sensors
@HVACGUY2 жыл бұрын
Thats 3M Scotchbrite
@Eric-ot6sn2 жыл бұрын
Has your zippers ever messed up on yours? Because I had mine for about 6 months then the zipper started messing up.
@HVACGUY2 жыл бұрын
Not yet . If I’m not mistaken that’s an exclusion in their warranty.
@MariosACandRefrigeration2 жыл бұрын
clc 1578
@josepagan92362 жыл бұрын
HVAC Guy How much weight the bag with tools 💪🏽
@HVACGUY2 жыл бұрын
I haven’t measured this one, but guessing…10-15 lbs.